SnailSploit/Claude-Red / Skills/wireless/offensive-lorawan-sub-ghz
offensive-lorawan-sub-ghz
VerifiedLoRaWAN and sub-GHz (433 / 868 / 915 MHz) attack methodology — LoRaWAN ABP/OTAA join attack, network/session key reuse, frame counter replay, downlink injection on TTN/Helium-style networks, sub-GHz protocol replay (KeeLoq garage doors, fixed-code remotes, TPMS spoofing, smart plug telemetry), HackRF / RTL-SDR / Flipper Zero workflows, signal analysis with Inspectrum / Universal Radio Hacker, and reconstruction of proprietary packet formats. Use for LoRaWAN deployments (smart cities, asset tracking, industrial telemetry), or any wireless device using the unlicensed 433/868/915 MHz bands (garage openers, doorbells, IoT sensors, RC equipment).
LoRaWAN & Sub-GHz Attacks
LoRaWAN provides long-range low-bitrate communication for IoT — common in smart cities, asset tracking, and industrial telemetry. Outside LoRaWAN, the 433 / 868 / 915 MHz ISM bands host garage doors, doorbells, smart plugs, weather stations, and TPMS — most with weak or no crypto.
Quick Workflow
- Identify the band + modulation (LoRa CSS vs. simple OOK/FSK)
- Capture transmissions with appropriate hardware (HackRF / RTL-SDR / Flipper Zero)
- For LoRaWAN: capture join + uplinks; analyze key derivation
- For proprietary sub-GHz: demodulate, identify packet format, replay or craft
Hardware
| Tool | Range | Use |
|---|---|---|
| RTL-SDR | RX only, 24 MHz–1.7 GHz | Cheap reconnaissance |
| HackRF One | RX/TX, 1 MHz–6 GHz | Full transceiver |
| Flipper Zero | RX/TX, sub-GHz | Quick replays, fixed-code attacks |
| LimeSDR / BladeRF | RX/TX, wider band | Higher fidelity for LoRaWAN |
| YARD Stick One | TX-focused sub-GHz | Targeted replays |
| LoRa-specific gateway (RAK / Heltec) | LoRaWAN dual-direction | Standards-compliant LoRaWAN testing |
LoRaWAN
LoRaWAN is a MAC layer over LoRa physical (chirp spread spectrum). Devices either:
- OTAA (Over-the-Air Activation) — derive session keys at join
- ABP (Activation By Personalization) — pre-flashed keys
OTAA Join Capture
# Capture LoRa packets with HackRF + Inspectrum
hackrf_transfer -r capture.iq -f 868000000 -s 1000000 -n 60000000
# Or LoRa-specific: rak_common_for_gateway
# Decode with PHY + MAC stack
git clone https://github.com/Lora-net/LoRaMac-node
# Or use ChirpStack as a sniffing gateway
The Join-Request and Join-Accept are encrypted with the device's AppKey. With AppKey (extracted from device firmware — see offensive-iot):
- Decrypt Join-Accept → recover NwkSKey, AppSKey
- Subsequent traffic decryption + injection
ABP — Pre-Flashed Keys
ABP devices have NwkSKey + AppSKey flashed at manufacture. Common flaws:
- Same key across thousands of devices (vendor laziness)
- No frame counter rollover protection → replay any historical uplink
- DevAddr predictability (sequential allocation)
# If you have NwkSKey + AppSKey + DevAddr, decode/inject with lorawan-test-tools
git clone https://github.com/IoTsec/loraserver-attack-tools
python lora_inject.py --nwkskey <NWKS> --appskey <APPS> --devaddr <ADDR>
Frame Counter Replay
Older LoRaWAN 1.0.x doesn't enforce strict frame counter monotonicity in all stacks. Replay an uplink with a different timestamp → server processes as fresh.
Downlink Injection
If you control AppSKey + NwkSKey, you can inject downlinks (configuration changes, remote commands) to devices.
Sub-GHz Proprietary Protocols
Quick Capture + Replay (Flipper Zero / HackRF)
# RTL-SDR live monitor
rtl_433 -f 433.92M -A # auto-decode many devices
gqrx # interactive spectrum analyzer
# Flipper Zero Sub-GHz menu: Read → identify modulation → capture → save
# Then replay from the saved file
# HackRF capture
hackrf_transfer -r garage.iq -f 433920000 -s 8000000 -n 80000000
# Inspectrum to visualize, identify OOK / FSK, decode bits
KeeLoq (Old Garage Doors, Some Cars)
KeeLoq uses a 32-bit block cipher with a manufacturer key. The manufacturer key was extracted publicly years ago for major brands. With it:
- Decrypt rolling code → predict next valid code
- Combined with capture-replay, take over the remote
# rolling-code-tools (research)
git clone https://github.com/AndrewMohawk/RollingPwn
Modern KeeLoq deployments (last 5 years) have rotated manufacturer keys, but legacy hardware (older garage doors, some industrial equipment) is in scope.
Fixed-Code Remotes
Many cheap garage openers, doorbells, and smart plugs use fixed codes — the same packet every time you press the button. Capture once, replay forever.
# Flipper Zero: Read → Save → Send (from saved file)
# Or with RFCat:
python -c "import rflib; ..."
# OR with HackRF:
hackrf_transfer -t replay.iq -f 433920000 -s 8000000
TPMS Spoofing
Tire-pressure monitoring sensors broadcast at 315/433 MHz with no authentication. Spoof low-pressure alerts:
# Capture legitimate TPMS
rtl_433 -f 315M -F json | grep TPMS
# Synthesize crafted alerts (custom modulator with HackRF)
# Useful for testing TPMS-aware vehicle systems or as denial-of-trust attack
Reconstruction of Unknown Protocols
# Universal Radio Hacker (URH) — visual reverse engineering
urh
# Load .iq capture, identify modulation visually,
# auto-detect symbols, decode bits, identify packet structure
URH walks you from raw RF to a parsed protocol description, even with no docs.
Engagement Cheatsheet
# 1. Identify band + modulation
rtl_433 -f <freq> -A # auto-detect known protocols
gqrx # spectrum view to find activity
# 2. For LoRaWAN
# - Set up gateway (or HackRF + LoRa decoding)
# - Capture joins + uplinks
# - Extract keys from device firmware (see offensive-iot)
# 3. For proprietary sub-GHz
# - Capture with HackRF / RTL-SDR
# - Visualize / decode with Inspectrum or URH
# - Replay or craft
# 4. Document modulation, frequency, packet format, replay viability
Detection
- LoRaWAN networks have server-side anomaly detection (frame counter, signal strength, geographic) — varies widely by operator
- Sub-GHz consumer products typically have no monitoring
- TPMS / industrial equipment has minimal telemetry on RF anomalies
Reporting
- Identify exact frequency, modulation, baud, and packet format per device
- Distinguish capture-replay vs. crafted-frame attacks
- Note crypto state (cleartext / weak-fixed-key / standards-compliant)
- For LoRaWAN: identify AppKey / NwkSKey / AppSKey storage in firmware
Key References
- rtl_433 protocol database: github.com/merbanan/rtl_433
- Universal Radio Hacker: github.com/jopohl/urh
- RollingPwn (KeeLoq research): github.com/AndrewMohawk/RollingPwn
- LoRaWAN Specification: lora-alliance.org
- Source: https://github.com/SnailSploit/offensive-checklist/blob/main/wireless.md
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| writing-skillsobra/superpowersUse when creating new skills, editing existing skills, or verifying skills work before deployment | Stars: 319k | Updated | Claude CodeCodex | Verified | Install |
| xlsxanthropics/skillsUse this skill any time a spreadsheet file is the primary input or output. This means any task where the user wants to: open, read, edit, or fix an existing .xlsx, .xlsm, .xltx, .csv, or .tsv file (e.g., adding columns, computing formulas, formatting, charting, cleaning messy data); create a new spreadsheet from scratch or from other data sources; or convert between tabular file formats. Trigger especially when the user references a spreadsheet file by name or path — even casually (like "the xlsx in my downloads") — and wants something done to it or produced from it. Also trigger for cleaning or restructuring messy tabular data files (malformed rows, misplaced headers, junk data) into proper spreadsheets. The deliverable must be a spreadsheet file. Do NOT trigger when the primary deliverable is a Word document, HTML report, standalone Python script, database pipeline, or Google Sheets API integration, even if tabular data is involved. | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |
| shipping-and-launchaddyosmani/agent-skillsPrepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy. | Stars: 118k | Updated | Claude CodeCodex | Verified | Install |
| childhoodthedotmack/claude-memBabysit a shipped release after merge, publication, or deployment. Verify published packages, production behavior, installed plugins, and late CI or user reports until the observation window is clean; use babysit for PR readiness before release. | Stars: 118k | Updated | Claude CodeCodex | Verified | Install |