Skip to content

skymanbp/sci-paper / skills/physics

physics

Verified

物理第一原则核查(测量原件,只产 finding,不改稿):量纲一致性、渐近极限、对称性/宇称/守恒律、信息论与统计不等式的前提、代数再推导、数值溯源、基础引用真实性、编译与交叉引用完整性。findings 走 sci-paper.feedback.v1 的后果类别与 measurement state;拿不到证据报 unmeasured 或 not_applicable,绝不记成零 finding。可单独运行,也是 /sci-paper:paper-review 维度 K 的唯一来源。Use for: 物理正确性核查, 量纲检查, 守恒律与宇称, 渐近极限, 数值溯源, physics check, 物理第一原则审查。

physics — 物理第一原则核查(测量原件)

Normative authority: docs/SCIPAPER_STANDARD.md。findings 一律用 sci-paper.feedback.v1 的后果类别与 measurement state。本 skill 不定义自己的 评级表,不产生 paper 级 PASS/FAIL,也不要求 advisory 归零。

这是测量原件:只产 finding,不改稿。 修复动作由调用它的组合 skill (/sci-paper:paper-review)按标准 §5 路由;单独运行时把 finding 交还作者。

0. 取证纪律

  1. 禁止用记忆 / 缓存 / 历史对话作为事实依据。 每个数字、公式、引用都必须 当轮重新打开源文件读取。"我记得 / 上次说过" 不是证据。
  2. 禁止把关键词 grep 当作唯一证据。 grep 只定位行号;定位后必须 Read 上下文 (前后 20 行起步)确认语义。
  3. 禁止猜测 / 外推。 不知道 → unmeasured + NEEDS SOURCE;数字对不上 → INCONSISTENT (paper says X, source says Y);不写"应该是 X"。
  4. 数据溯源强制链。 每个数字必须回溯到 (a) 一个具体 CSV/npz/脚本输出,或 (b) 一个具体 DOI/arXiv ID 的具体 Table/Figure/公式编号,或 (c) 同论文内一个 已编号公式经一行算术得出。缺来源是 integrity_blocker。
  5. 不可得永远不等于零 finding。 缺工具、缺数据、缺访问权限一律显式标 unmeasured / degraded,不适用的检查标 not_applicable。

1. 准备

  1. 从头到尾 Read 论文全文(不抽样、不关键词跳读);超长文件分块读完为止。
  2. 建公式清单:每个 displayed equation 的左右端量纲 + 涉及物理量的定义。
  3. 建数字溯源清单:abstract / table / figure caption / 正文的所有数值, 每条记值、位置、声称来源、核验状态。
  4. 执行论文的权威 build(项目自己的 build 命令优先;LaTeX 默认 pdflatex, bibtex, pdflatex × 2,与 figure-review 一致); 记录 errors、undefined refs、multiply-defined labels、overfull、missing-number。

2. 检查项 P1–P8

P1. 量纲一致性

  • 每个 displayed equation 左右两端量纲一致?
  • 出现的常数(σ_T、m_e c²、k_B、G、Σ_crit 等)因子正确?
  • Fisher 矩阵 𝓕_θθ 量纲为 [θ]⁻²;其逆 𝓕⁻¹ 为 [θ]²。
  • 给出但不可直接使用的 "schematic" 公式必须显式标 (schematic, illustrative); 未标注而量纲不闭合的按 integrity_blocker 处理。

P2. 渐近行为

  • 关键量在 d→0、M→∞、ρ→1、N→∞、κ→0、ν→∞ 等极限下行为合理?
  • 各极限是否对应已知解析结果(NFW、isothermal、Gaussian noise、CDM …)?
  • 有 "saturation" 声明时是否给出趋近方向(从上 / 从下)?

P3. 对称性 / 宇称 / 守恒律

  • 显式对称性(rotation、parity、translation、gauge)被尊重?
  • 任何 "parity argument" 真有数学根据,而不是措辞?
  • Fisher additivity / DPI / KL≥0 / P_e≥0 等不等式成立?
  • sign 约定(b/a=-1 vs |b/a|=1)跨全文一致?

P4. 统计与信息论前提

边界(canonical home — 本条):本维度只管估计量本身的物理/信息论前提; 样本划分、CV/grouping、泄漏防护、多重比较、prior 可复现性等经验方法学归 /sci-paper:logic,不在此复述。

  • iid / Gaussian / 有限矩 等假设在 theorem 中显式声明?
  • CLT 与 LDP regime 正确区分?1/√N 还是 1/N scaling?
  • Pinsker / Fano / Cramér-Rao / DPI 的应用满足各自前提?

P5. 代数再推导

  • 多步推导逐步可重现;必要时手算并用独立脚本验证。
  • 关键代数(如 Pinsker TV²≤KL/2 配 Gaussian KL = ½Δθᵀ𝓕Δθ → TV ≤ ½√(𝓕Δθ²))逐步检查,不接受"显然"。
  • 化简结果能从原始表达式重得?量纲在化简全程保持?

P6. 数值溯源

  • 每个数字 → 一个具体脚本输出、一个 DOI 的 Table/Figure,或本文已编号公式加一行算术。
  • 重新跑脚本确认数字仍能复现——脚本演变后会漂移。
  • abstract / 正文 / 图表 caption 三方一致到所有有效数字。
  • 被 cite 的 companion paper 数字与该 companion 当前版本同步?

P7. 基础引用真实性

边界:本条只查支撑物理论证的基础文献(框架、定理、不等式、模型的原始出处) 是否真实且真支持所述物理主张。全量 bibliography 核验归 /sci-paper:paper-review 维度 F,不在此复述。

  • 每个物理框架/定理/不等式的原始出处可查(DOI / arXiv ID / ADS)?
  • 关键文献无遗漏?没有 fabricated 引用?

P8. 编译与交叉引用完整性

  • 权威 build → 0 errors?
  • 0 undefined references / 0 multiply-defined labels / 0 overfull hboxes / 0 missing-number warnings?
  • 编译失败或 label 冲突为 integrity_blocker。

3. 边界 —— 本 skill 不做什么

  • 不做语域 / AI-ism 判定。 em-dash 与 L0 词表是 tools/ai_ism_lint.py 的 l0_target(kind="l0_target",退出码 1);论文倚重而语料不携带的术语由 tools/deai_register.py 按 corpus document frequency 判定。本 skill 不自带 关键词表 —— 一个问题两个互相矛盾的裁决比没有裁决更糟。
  • 不做结构 tell 审计。 归 /sci-paper:de-ai --audit-only 的 Pass 2。
  • 不做经验方法学审查。 归 /sci-paper:logic(见 P4 边界)。
  • 不做叙事结构审查。 归 /sci-paper:mainline。
  • 不改稿。 见顶部。

4. 后果分类

类别本 skill 的来源
integrity_blocker量纲错、物理错、推导错、数值不一致、编译失败、未声明的必要假设、伪造引用
advisory,排在最前命名/单位混用、精度不一、bracketing 超出物理域、schematic 公式无标注(仅限量纲闭合时;不闭合者按 P1 为 integrity_blocker)
advisory纯表述偏好

两行都是普通 advisory:strong 要求效应超出校准过的操作点(标准 §4),人工核查没有 操作点。第一行是有出处可查的清晰度缺陷,按标准 §4 第 3 条排在第二行之前。

每条 finding 带 measurement state。不适用的检查标 not_applicable 并说明为什么 不适用;拿不到证据标 unmeasured 并说明缺什么。

5. 报告

# Physics — First-Principles Findings

**Target**: <file> | **Field**: <field or none>

## Coverage
| check | status | method / why not applicable |
|---|---|---|
| P1 … P8 | measured / unmeasured / not_applicable | … |

## Numerical anchors
| quantity | paper claim | source | verification |

## Findings
| id | kind | location | evidence | source trace | recommended action |

## Build state
- errors / undef refs / multiply-defined / overfull: … / … / … / …

不打印 PASS/FAIL 行。终止态是"每条检查都有明确状态",不是"零 finding"。

6. 反模式

  • ❌ "grep 了没找到,所以没问题" —— grep 是定位工具不是验证工具。
  • ❌ "上次对话里这个数是 Y" —— 上次对话不算证据。
  • ❌ 把 unmeasured 写成通过。
  • ❌ "量纲不严格但读者会理解" —— 量纲错就是错。
  • ❌ "schematic 不需要量纲一致" —— 必须显式标注,否则按 integrity_blocker。
  • ❌ 在本 skill 内新增关键词词表。
  • ❌ 复述 /sci-paper:logic / /sci-paper:mainline / /sci-paper:figure-review 已经拥有的检查项。
add-product-e2e-evalpaperclipai/paperclipAdd or extend a Paperclip full-stack runner E2E workflow, fixture, matcher, or report evidence path for local or Daytona execution.Stars: 115kUpdated Claude CodeCodexVerifiedInstall
add-runner-evalpaperclipai/paperclipAdd or extend a Paperclip Runner protocol evaluation definition, roster, assertion, or report fixture with provenance and narrow validation.Stars: 115kUpdated Claude CodeCodexVerifiedInstall
diagnose-why-work-stoppedpaperclipai/paperclipCompatibility entry point for failed, stalled, looping, or over-recovered Paperclip work. Use fix-failed-paperclip-run for the full diagnosis, regression, repair, real verification, and green-PR workflow; honor an explicitly requested diagnosis-only scope.Stars: 115kUpdated Claude CodeCodexVerifiedInstall
fix-failed-paperclip-runpaperclipai/paperclipDiagnose and fix failed, stuck, slow, or incorrectly blocked Paperclip tasks and runs. Use with a task/run URL or failure report to trace the root cause, prove a regression red then green, check second-order effects, verify the real workflow, and deliver a PR with passing checks.Stars: 115kUpdated Claude CodeCodexVerifiedInstall