Skip to content

Parsa-29/loop-config / skills/flitt-payments

flitt-payments

Verified

Flitt payment API implementation guidance for auth, SHA1 request/callback signatures, sandbox testing, hosted checkout, Payment (redirect), Payment (direct), saved-card /api/recurring charges, card token saving, scheduled subscriptions, reversals/refunds, captures for preauth payments, reservation_data payloads, supported currencies, callback/webhook handling, response codes, 3DS steps, order status polling, and response handling. Use when Codex needs to integrate or debug Flitt payments, create payment requests, build or verify signatures, attach reservation_data, validate currency support, implement callback handlers, interpret response codes, obtain or charge a rectoken, create/cancel subscriptions, reverse/refund through /api/reverse/order_id, capture through /api/capture/order_id, poll status, or troubleshoot Flitt API failures.

Flitt Payments

Core Workflow

Use this skill for Flitt payment API work, starting with authentication and testing.

  1. Read references/testing-auth.md when the task involves sandbox credentials, test cards, request shape, response interpretation, or signature troubleshooting.
  2. Read references/sending-request.md when the task involves checkout flow design, redirect endpoints, request/response envelopes, callback handling, or choosing between browser form POST and host-to-host checkout URL creation.
  3. Read references/payment-redirect.md when the task involves Payment (redirect) parameters, checkout URL creation, HTML form redirect creation, embedded checkout token creation, or /api/status/order_id polling.
  4. Read references/payment-direct.md when the task involves Payment (direct), raw card parameters, PCI DSS merchant flows, or /api/3dsecure_step1 and /api/3dsecure_step2.
  5. Read references/payment-saved-card.md when the task involves Payment with saved card, rectoken, recurring/tokenized charges, or /api/recurring.
  6. Read references/saving-cards.md when the task involves obtaining rectoken, required_rectoken=Y, verification-based tokenization, or the first-purchase card-save flow.
  7. Read references/reversal.md when the task involves refunds, reversals, partial/full reverse, reverse_id, /api/reverse/order_id, or reversal status.
  8. Read references/capture.md when the task involves capture, preauth hold completion, partial capture, /api/capture/order_id, or capture status.
  9. Read references/subscriptions.md when the task involves scheduled subscriptions, subscription=Y, recurring_data, /api/subscription, or starting/stopping subscriptions.
  10. Read references/additional-data.md when the task involves reservation_data, checkout custom fields, fiscalisation products, payer metadata, or forcing/relaxing 3DS behavior through additional data.
  11. Read references/currencies.md when the task involves validating the currency field, merchant-country currency support, or payment currency selection.
  12. Read references/callbacks.md when the task involves server_callback_url, webhook endpoints, retries, firewall/IP allowlists, or verifying asynchronous payment notifications.
  13. Read references/signature.md when the task is specifically about Flitt signature generation, verification failures, lowercasing, empty parameters, /api/recurring signing, or callback/redirect signature mismatches.
  14. Read references/response-codes.md when the task involves response_code, API failures, embedded-checkout JavaScript error codes, decline interpretation, or deciding whether merchant, issuer, or Flitt must solve the problem.
  15. Use scripts/flitt_signature.py instead of hand-writing SHA1 signature code for flat request/response parameters.
  16. Keep public Flitt test credentials out of production code. Use environment variables or the app's secret manager for real merchant credentials.
  17. Treat response_status as the HTTP/API processing status, not the payment result. Inspect payment-specific fields such as order_status, reverse_status, reversal_amount, capture_status, subscription status, and response_code for operation outcome.

Authentication

Flitt API requests are HTTPS POST requests. Every signed request includes a signature parameter inside the root request object.

Generate the signature from:

  1. The merchant payment secret key.
  2. All non-empty request or response parameters except signature and response_signature_string.
  3. Parameters sorted alphabetically by key.
  4. Values joined with |, encoded as UTF-8, then hashed with SHA1.

Use the helper:

python3 ~/.codex/skills/flitt-payments/scripts/flitt_signature.py \
  --secret test \
  --params '{"merchant_id":1549901,"amount":1000,"currency":"GEL","order_desc":"Test payment","order_id":"TestOrder2","server_callback_url":"http://myshop/callback/"}'

To verify a received signature:

python3 ~/.codex/skills/flitt-payments/scripts/flitt_signature.py \
  --secret "$FLITT_PAYMENT_KEY" \
  --params-file response.json \
  --verify "$FLITT_RESPONSE_SIGNATURE"

If response.json has a root response or request object, the helper signs that inner object automatically.

Testing

Use Flitt test merchant data only for sandbox work:

  • Purchase merchant: merchant_id=1549901, secret key test
  • Payout secret key: testcredit
  • Test card data: load references/testing-auth.md

For manual test flows, choose cards deliberately:

  • Use an approve card for happy-path checkout.
  • Use a decline card when verifying failure UI and webhook handling.
  • Use 3DS challenge/frictionless cards when validating redirect and callback handling.
  • Use Open Banking payment_method=x only for Demo Bank testing.

Sending Requests

Use the hosted checkout flow unless the user explicitly needs direct card entry or another specialized Flitt API.

  • Scheme A: create an HTML form and submit the customer browser to https://pay.flitt.com/api/checkout/redirect/ with HTTPS POST.
  • Scheme B: send a server-to-server JSON request to https://pay.flitt.com/api/checkout/url/, read checkout_url from the response, then redirect the customer there.
  • Always include Flitt parameters under a root request object for JSON requests.
  • Always handle both customer return (response_url) and server-to-server callback (server_callback_url) when available; use the callback as the reliable status update.

For Payment (redirect) details, load references/payment-redirect.md.

Direct Payments

Use Payment (direct) only when the merchant is intentionally PCI DSS compliant and the app is allowed to collect/process card data directly.

  • Direct card requests include raw card_number, cvv2, and expiry_date values; never log or persist those values unless the project has explicit compliant storage controls.
  • Start direct 3DS authentication with POST /api/3dsecure_step1.
  • If 3DS is required, submit the customer to acs_url with PaReq, MD, and TermUrl.
  • Complete the transaction with POST /api/3dsecure_step2 using returned pares and md.
  • For details, load references/payment-direct.md.

Saved Card Payments

Use Payment with saved card when charging a previously issued Flitt rectoken.

  • Create saved-card charges with POST /api/recurring.
  • Send JSON with root request; the endpoint is always host-to-host.
  • Redirect and 3DS flows are not available on /api/recurring; use Payment (direct) if 3DS is required.
  • Treat rectoken as sensitive payment data and avoid logging it.
  • For details, load references/payment-saved-card.md.

Saving Cards

Use the saving-cards reference when the task is about obtaining a new rectoken, not charging an existing one.

  • Request token issuance with required_rectoken=Y during create-order flow.
  • Option 1: save card during verification with verification=Y and a small amount that is held then reversed.
  • Option 2: save card during the first real purchase and return the token alongside the purchase result.
  • rectoken is returned to response_url and server_callback_url.
  • For details, load references/saving-cards.md.

Reversals

Use reversals to refund or reverse an approved payment fully or partially.

  • Create a reversal with POST /api/reverse/order_id.
  • For a full reversal, send amount equal to the original order actual_amount.
  • Multiple partial reversals are allowed while their sum is less than or equal to actual_amount.
  • Use reverse_id as an idempotency key for safe retry of partial reversals.
  • Check reversal status through POST /api/status/order_id; compare accumulated reversal_amount with actual_amount.
  • For details, load references/reversal.md.

Captures

Use capture to charge funds previously held by a card preauthorization.

  • Create the original payment with preauth=Y.
  • Capture with POST /api/capture/order_id.
  • Card payments support preauth/capture; other payment methods use one-stage charge behavior.
  • Multiple captures are not allowed. A single full or partial capture is available.
  • Check capture status through POST /api/status/order_id; parse additional_info.capture_status and additional_info.capture_amount.
  • For details, load references/capture.md.

Subscriptions

Use subscriptions for fixed scheduled charges such as daily, weekly, monthly, or yearly billing.

  • Create subscription checkout by adding subscription=Y and recurring_data to /api/checkout/redirect, /api/checkout/token, or /api/checkout/url.
  • Do not use subscriptions with Payment (direct) integration or Open Banking.
  • Supported methods are Visa/MasterCard/Amex cards, Apple Pay, and Google Pay.
  • Start or stop an existing subscription with POST /api/subscription and action=start or action=stop.
  • For details, load references/subscriptions.md.

Additional Data

Use reservation_data when the merchant needs to attach extra payer, device, checkout-field, or product/fiscalisation metadata to a purchase request.

  • reservation_data is BASE64-encoded JSON attached to create-purchase requests.
  • Keep keys and values ASCII/Latin-alphanumeric plus separator symbols as documented.
  • Use it for customer metadata, fields_custom[], products[], settlement_id, and risk/fiscalisation-related extras.
  • Be careful with 3ds_mandatory: the docs say it can be used only after approval from the Flitt risk team.
  • For details, load references/additional-data.md.

Currencies

Use the currency matrix before wiring or validating the Flitt currency field.

  • Supported bank-card processing currencies depend on merchant country.
  • Do not assume USD or EUR are available for every merchant geography.
  • For details, load references/currencies.md.

Callbacks

Use Flitt callbacks as the reliable asynchronous status source for payments and follow-up operations.

  • Flitt sends JSON POST callbacks to server_callback_url.
  • Treat the callback as successfully processed only when your endpoint returns HTTP 200 OK.
  • Flitt does not follow redirects, so callback endpoints must respond directly.
  • Verify callback signatures before trusting payment state, and process callbacks idempotently by order_id and/or payment_id.
  • For details, load references/callbacks.md.

Signatures

Use the dedicated signature reference when implementing or debugging request, response, callback, or redirect signature handling.

  • Flitt signs request and response data with SHA1 over secret|sorted-nonempty-values.
  • Exclude signature and, for verification, response_signature_string.
  • Keep SHA1 hex lowercase.
  • Be especially careful with zero values, empty values, UTF-8 encoding, and endpoint-specific parameter sets such as /api/recurring.
  • For details, load references/signature.md.

Response Codes

Use the response-code reference when deciding whether a failure is caused by merchant input, issuer decline, or Flitt/platform configuration.

  • API response_code values and embedded-checkout JavaScript codes have different ranges and meanings.
  • Many codes are operationally actionable only after you classify ownership: merchant, issuer bank, or Flitt.
  • For details, load references/response-codes.md.

Troubleshooting

When Flitt returns Invalid signature:

  1. Confirm the secret key belongs to the same merchant and environment.
  2. Log the exact pre-hash signature string locally, redacting the secret in shared logs.
  3. Ensure empty values are omitted completely, including their | separator.
  4. Ensure numeric zero is preserved as 0, not converted to empty or null.
  5. Ensure signature and response_signature_string are excluded.
  6. Ensure non-Latin text is sent and hashed as UTF-8.
  7. Ensure the final SHA1 hex digest is lowercase.

When testing callbacks or redirects in test mode, Flitt may return response_signature_string; use it only as a diagnostic hint and never include it in verification.

finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the workStars: 319kUpdated Claude CodeCodexVerifiedInstall
systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixesStars: 319kUpdated Claude CodeCodexVerifiedInstall
test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation codeStars: 319kUpdated Claude CodeCodexVerifiedInstall
skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy.Stars: 197kUpdated Claude CodeCodexVerifiedInstall