Skip to content

Orchestra-Research/AI-Research-SKILLs / 10-optimization/gptq

Post-training 4-bit quantization for LLMs with minimal accuracy loss. Use for deploying large models (70B, 405B) on consumer GPUs, when you need 4× memory reduction with <2% perplexity degradation, or for faster inference (3-4× speedup) vs FP16. Integrates with transformers and PEFT for QLoRA fine-tuning.

GPTQ (Generative Pre-trained Transformer Quantization)

Post-training quantization method that compresses LLMs to 4-bit with minimal accuracy loss using group-wise quantization.

When to use GPTQ

Use GPTQ when:

  • Need to fit large models (70B+) on limited GPU memory
  • Want 4× memory reduction with <2% accuracy loss
  • Deploying on consumer GPUs (RTX 4090, 3090)
  • Need faster inference (3-4× speedup vs FP16)

Use AWQ instead when:

  • Need slightly better accuracy (<1% loss)
  • Have newer GPUs (Ampere, Ada)
  • Want Marlin kernel support (2× faster on some GPUs)

Use bitsandbytes instead when:

  • Need simple integration with transformers
  • Want 8-bit quantization (less compression, better quality)
  • Don't need pre-quantized model files

Quick start

Installation

# Install AutoGPTQ
pip install auto-gptq

# With Triton (Linux only, faster)
pip install auto-gptq[triton]

# With CUDA extensions (faster)
pip install auto-gptq --no-build-isolation

# Full installation
pip install auto-gptq transformers accelerate

Load pre-quantized model

from transformers import AutoTokenizer
from auto_gptq import AutoGPTQForCausalLM

# Load quantized model from HuggingFace
model_name = "TheBloke/Llama-2-7B-Chat-GPTQ"

model = AutoGPTQForCausalLM.from_quantized(
    model_name,
    device="cuda:0",
    use_triton=False  # Set True on Linux for speed
)

tokenizer = AutoTokenizer.from_pretrained(model_name)

# Generate
prompt = "Explain quantum computing"
inputs = tokenizer(prompt, return_tensors="pt").to("cuda:0")
outputs = model.generate(**inputs, max_new_tokens=200)
print(tokenizer.decode(outputs[0]))

Quantize your own model

from transformers import AutoTokenizer
from auto_gptq import AutoGPTQForCausalLM, BaseQuantizeConfig
from datasets import load_dataset

# Load model
model_name = "meta-llama/Llama-2-7b-chat-hf"
tokenizer = AutoTokenizer.from_pretrained(model_name)

# Quantization config
quantize_config = BaseQuantizeConfig(
    bits=4,              # 4-bit quantization
    group_size=128,      # Group size (recommended: 128)
    desc_act=False,      # Activation order (False for CUDA kernel)
    damp_percent=0.01    # Dampening factor
)

# Load model for quantization
model = AutoGPTQForCausalLM.from_pretrained(
    model_name,
    quantize_config=quantize_config
)

# Prepare calibration data
dataset = load_dataset("c4", split="train", streaming=True)
calibration_data = [
    tokenizer(example["text"])["input_ids"][:512]
    for example in dataset.take(128)
]

# Quantize
model.quantize(calibration_data)

# Save quantized model
model.save_quantized("llama-2-7b-gptq")
tokenizer.save_pretrained("llama-2-7b-gptq")

# Push to HuggingFace
model.push_to_hub("username/llama-2-7b-gptq")

Group-wise quantization

How GPTQ works:

  1. Group weights: Divide each weight matrix into groups (typically 128 elements)
  2. Quantize per-group: Each group has its own scale/zero-point
  3. Minimize error: Uses Hessian information to minimize quantization error
  4. Result: 4-bit weights with near-FP16 accuracy

Group size trade-off:

Group SizeModel SizeAccuracySpeedRecommendation
-1 (per-column)SmallestBestSlowestResearch only
32SmallerBetterSlowerHigh accuracy needed
128MediumGoodFastRecommended default
256LargerLowerFasterSpeed critical
1024LargestLowestFastestNot recommended

Example:

Weight matrix: [1024, 4096] = 4.2M elements

Group size = 128:
- Groups: 4.2M / 128 = 32,768 groups
- Each group: own 4-bit scale + zero-point
- Result: Better granularity → better accuracy

Quantization configurations

Standard 4-bit (recommended)

from auto_gptq import BaseQuantizeConfig

config = BaseQuantizeConfig(
    bits=4,              # 4-bit quantization
    group_size=128,      # Standard group size
    desc_act=False,      # Faster CUDA kernel
    damp_percent=0.01    # Dampening factor
)

Performance:

  • Memory: 4× reduction (70B model: 140GB → 35GB)
  • Accuracy: ~1.5% perplexity increase
  • Speed: 3-4× faster than FP16

High accuracy (3-bit with larger groups)

config = BaseQuantizeConfig(
    bits=3,              # 3-bit (more compression)
    group_size=128,      # Keep standard group size
    desc_act=True,       # Better accuracy (slower)
    damp_percent=0.01
)

Trade-off:

  • Memory: 5× reduction
  • Accuracy: ~3% perplexity increase
  • Speed: 5× faster (but less accurate)

Maximum accuracy (4-bit with small groups)

config = BaseQuantizeConfig(
    bits=4,
    group_size=32,       # Smaller groups (better accuracy)
    desc_act=True,       # Activation reordering
    damp_percent=0.005   # Lower dampening
)

Trade-off:

  • Memory: 3.5× reduction (slightly larger)
  • Accuracy: ~0.8% perplexity increase (best)
  • Speed: 2-3× faster (kernel overhead)

Kernel backends

ExLlamaV2 (default, fastest)

model = AutoGPTQForCausalLM.from_quantized(
    model_name,
    device="cuda:0",
    use_exllama=True,      # Use ExLlamaV2
    exllama_config={"version": 2}
)

Performance: 1.5-2× faster than Triton

Marlin (Ampere+ GPUs)

# Quantize with Marlin format
config = BaseQuantizeConfig(
    bits=4,
    group_size=128,
    desc_act=False  # Required for Marlin
)

model.quantize(calibration_data, use_marlin=True)

# Load with Marlin
model = AutoGPTQForCausalLM.from_quantized(
    model_name,
    device="cuda:0",
    use_marlin=True  # 2× faster on A100/H100
)

Requirements:

  • NVIDIA Ampere or newer (A100, H100, RTX 40xx)
  • Compute capability ≥ 8.0

Triton (Linux only)

model = AutoGPTQForCausalLM.from_quantized(
    model_name,
    device="cuda:0",
    use_triton=True  # Linux only
)

Performance: 1.2-1.5× faster than CUDA backend

Integration with transformers

Direct transformers usage

from transformers import AutoModelForCausalLM, AutoTokenizer

# Load quantized model (transformers auto-detects GPTQ)
model = AutoModelForCausalLM.from_pretrained(
    "TheBloke/Llama-2-13B-Chat-GPTQ",
    device_map="auto",
    trust_remote_code=False
)

tokenizer = AutoTokenizer.from_pretrained("TheBloke/Llama-2-13B-Chat-GPTQ")

# Use like any transformers model
inputs = tokenizer("Hello", return_tensors="pt").to("cuda")
outputs = model.generate(**inputs, max_new_tokens=100)

QLoRA fine-tuning (GPTQ + LoRA)

from transformers import AutoModelForCausalLM
from peft import prepare_model_for_kbit_training, LoraConfig, get_peft_model

# Load GPTQ model
model = AutoModelForCausalLM.from_pretrained(
    "TheBloke/Llama-2-7B-GPTQ",
    device_map="auto"
)

# Prepare for LoRA training
model = prepare_model_for_kbit_training(model)

# LoRA config
lora_config = LoraConfig(
    r=16,
    lora_alpha=32,
    target_modules=["q_proj", "v_proj"],
    lora_dropout=0.05,
    bias="none",
    task_type="CAUSAL_LM"
)

# Add LoRA adapters
model = get_peft_model(model, lora_config)

# Fine-tune (memory efficient!)
# 70B model trainable on single A100 80GB

Performance benchmarks

Memory reduction

ModelFP16GPTQ 4-bitReduction
Llama 2-7B14 GB3.5 GB4×
Llama 2-13B26 GB6.5 GB4×
Llama 2-70B140 GB35 GB4×
Llama 3-405B810 GB203 GB4×

Enables:

  • 70B on single A100 80GB (vs 2× A100 needed for FP16)
  • 405B on 3× A100 80GB (vs 11× A100 needed for FP16)
  • 13B on RTX 4090 24GB (vs OOM with FP16)

Inference speed (Llama 2-7B, A100)

PrecisionTokens/secvs FP16
FP1625 tok/s1×
GPTQ 4-bit (CUDA)85 tok/s3.4×
GPTQ 4-bit (ExLlama)105 tok/s4.2×
GPTQ 4-bit (Marlin)120 tok/s4.8×

Accuracy (perplexity on WikiText-2)

ModelFP16GPTQ 4-bit (g=128)Degradation
Llama 2-7B5.475.55+1.5%
Llama 2-13B4.884.95+1.4%
Llama 2-70B3.323.38+1.8%

Excellent quality preservation - less than 2% degradation!

Common patterns

Multi-GPU deployment

# Automatic device mapping
model = AutoGPTQForCausalLM.from_quantized(
    "TheBloke/Llama-2-70B-GPTQ",
    device_map="auto",  # Automatically split across GPUs
    max_memory={0: "40GB", 1: "40GB"}  # Limit per GPU
)

# Manual device mapping
device_map = {
    "model.embed_tokens": 0,
    "model.layers.0-39": 0,  # First 40 layers on GPU 0
    "model.layers.40-79": 1,  # Last 40 layers on GPU 1
    "model.norm": 1,
    "lm_head": 1
}

model = AutoGPTQForCausalLM.from_quantized(
    model_name,
    device_map=device_map
)

CPU offloading

# Offload some layers to CPU (for very large models)
model = AutoGPTQForCausalLM.from_quantized(
    "TheBloke/Llama-2-405B-GPTQ",
    device_map="auto",
    max_memory={
        0: "80GB",  # GPU 0
        1: "80GB",  # GPU 1
        2: "80GB",  # GPU 2
        "cpu": "200GB"  # Offload overflow to CPU
    }
)

Batch inference

# Process multiple prompts efficiently
prompts = [
    "Explain AI",
    "Explain ML",
    "Explain DL"
]

inputs = tokenizer(prompts, return_tensors="pt", padding=True).to("cuda")

outputs = model.generate(
    **inputs,
    max_new_tokens=100,
    pad_token_id=tokenizer.eos_token_id
)

for i, output in enumerate(outputs):
    print(f"Prompt {i}: {tokenizer.decode(output)}")

Finding pre-quantized models

TheBloke on HuggingFace:

Search:

# Find GPTQ models on HuggingFace
https://huggingface.co/models?library=gptq

Download:

from auto_gptq import AutoGPTQForCausalLM

# Automatically downloads from HuggingFace
model = AutoGPTQForCausalLM.from_quantized(
    "TheBloke/Llama-2-70B-Chat-GPTQ",
    device="cuda:0"
)

Supported models

  • LLaMA family: Llama 2, Llama 3, Code Llama
  • Mistral: Mistral 7B, Mixtral 8x7B, 8x22B
  • Qwen: Qwen, Qwen2, QwQ
  • DeepSeek: V2, V3
  • Phi: Phi-2, Phi-3
  • Yi, Falcon, BLOOM, OPT
  • 100+ models on HuggingFace

References

Resources

writing-skillsobra/superpowersUse when creating new skills, editing existing skills, or verifying skills work before deploymentStars: 322kUpdated Claude CodeCodexVerifiedInstall
xlsxanthropics/skillsUse this skill any time a spreadsheet file is the primary input or output. This means any task where the user wants to: open, read, edit, or fix an existing .xlsx, .xlsm, .xltx, .csv, or .tsv file (e.g., adding columns, computing formulas, formatting, charting, cleaning messy data); create a new spreadsheet from scratch or from other data sources; or convert between tabular file formats. Trigger especially when the user references a spreadsheet file by name or path — even casually (like "the xlsx in my downloads") — and wants something done to it or produced from it. Also trigger for cleaning or restructuring messy tabular data files (malformed rows, misplaced headers, junk data) into proper spreadsheets. The deliverable must be a spreadsheet file. Do NOT trigger when the primary deliverable is a Word document, HTML report, standalone Python script, database pipeline, or Google Sheets API integration, even if tabular data is involved.Stars: 198kUpdated Claude CodeCodexVerifiedInstall
shipping-and-launchaddyosmani/agent-skillsPrepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy.Stars: 119kUpdated Claude CodeCodexVerifiedInstall
childhoodthedotmack/claude-memBabysit a shipped release after merge, publication, or deployment. Verify published packages, production behavior, installed plugins, and late CI or user reports until the observation window is clean; use babysit for PR readiness before release.Stars: 118kUpdated Claude CodeCodexVerifiedInstall