Skip to content

odinfree/storm-ecdsa-harness / skills/ecdsafail-fasteval

ecdsafail-fasteval

Verified

Score an ecdsa.fail ops.bin exactly like the official eval_circuit (same Fiat-Shamir shots, totals, failure counts and score) in minutes, at about 20 bytes per op instead of 56. Uses BitWonka's fasteval. Use when a circuit is too big for eval_circuit on your machine, when you need an official-equivalent score before submitting, or when you need a circuit's failure rate from fresh salted shots.

Schnällrichter (ecdsafail-fasteval)

fasteval

BitWonka's exact replica of the challenge's src/bin/eval_circuit.rs, from BitWonka/ecdsafail-tools fasteval/ (commit 9f92470, 11 Oct 2026). Clone it with git clone https://github.com/BitWonka/ecdsafail-tools and check out 9f92470. The tool's repository has no licence file, so use it from your own clone and do not redistribute its .rs files.

Why it is exact while parallel. eval_circuit draws everything from one SHAKE256 stream seeded by the op list's Fiat-Shamir hash. The first 64 x 9,024 bytes make the shots; after that every R/Hmr op reads 8 bytes per 64-shot batch whether or not it executes. So batch b's measurement bytes always sit at 64*9024 + 8*M*b (M = number of R/Hmr ops). One thread squeezes the stream in order; worker threads simulate the 141 batches in parallel on 20-byte packed ops.

Memory budget: about 20 B x ops + 8*M B x (workers + queued batches), plus ~1 GB fixed for the loader's 4M-op chunks of 56-byte records (CH = 1<<22, two 3-deep channels), so the saving only shows on big circuits. The official evaluator holds 56 B/op, so a 1.24e9-op low-Q build needs ~69 GB there and ~33 GB here (fits on a 48 GiB Mac); 1.78e9 ops needs ~100 GB there. This fixes the evaluation side only: the official build_circuit still collects point_add::build() into a Vec<Op> at 56 B/op before streaming it to zstd (src/bin/build_circuit.rs:92), so producing a 1.24e9-op ops.bin still needs ~69 GB (a big-RAM pod) unless the tree streams: BitWonka's low-Q trees honour LOWQ_EXACT_STREAM_PATH=<file>, which streams ops to disk byte-identically to write_ops (his PR 624 note, lines 186-189). The official runner has 128 GB.

Steps

  1. Bind to the checkout that built the circuit. Copy the two sources into that checkout and build:

    T=<your ecdsafail-tools clone>/fasteval
    cp "$T"/fasteval.rs "$T"/gensynth.rs <checkout>/src/bin/
    cp "$T"/validate.sh <checkout>/
    cd <checkout> && cargo build --release --bin fasteval --bin gensynth --bin eval_circuit
    

    Keep these three files out of the submission commit; they are analysis tooling. Done when target/release/fasteval exists.

  2. Gate on the harness revision. Run the differential test once per harness revision, and again whenever any of src/bin/eval_circuit.rs, src/circuit.rs, src/sim.rs, src/weierstrass_elliptic_curve.rs, Cargo.toml changes (check with git log -1 --format=%h -- <those files> on a full-history checkout, or gh api "repos/Layr-Labs/ecdsafail-challenge/commits?path=<file>&per_page=1"):

    bash validate.sh 200000 11 22 33
    

    It builds random ops.bin circuits (every op kind, nested conditions, R/Hmr under conditions), runs both evaluators, and compares the four correctness counts plus avg Toffoli, avg Clifford, qubits and op count from the results.tsv row (restored afterwards). Done when it prints all seeds match. Any MISMATCH means fasteval does not speak for this harness: stop using it here and report the diff. Random circuits fail on every shot, so this checks gate semantics, executed-gate accounting and measurement-stream alignment; the passing path was checked by BitWonka against four graded logs (732-739 Q, matched to the last digit).

  3. Score.

    FE_THREADS=6 ./target/release/fasteval path/to/ops.bin
    

    Read avg executed Toffoli, qubits, the failure counts, failing shots (any) and the final score (round(avg executed Toffoli) x qubits, as score.json computes it). More threads mostly add memory: the single SHAKE producer is the bottleneck.

  4. Estimate the true failure rate when lambda decides the row (the board's social norm since PR #419 is <= 18, later 19.5, expected failing shots per 9,024). Run fresh salted shot sets and average failing shots (any):

    for s in $(seq 1 20); do FE_SALT=$s ./target/release/fasteval ops.bin | grep 'failing shots'; done
    

    lambda = mean; standard error = sd / sqrt(runs). Salted scores are not the official score.

  5. Report with the label. Write numbers as fasteval (unsalted, harness <sha>) or fasteval FE_SALT x20, never as the official score. The submission is scored by the official runner; fasteval is the local prediction.

Differences from eval_circuit

  • Prints totals even when shots fail (eval_circuit stops at the first failing batch), and adds failing shots (any) (wrong output, phase error or dirty ancilla; eval_circuit counts failing batches).
  • Writes no score.json or results.tsv.
  • One unsalted run uses the same 9,024 shots as the grader, so its pass/fail on those shots is the grader's.

Verified here

24 Oct 2026, Layr-Labs/ecdsafail-challenge HEAD 6b0327d: validate.sh 200000 11 22 33 -> all seeds match (200k ops, 700 qubits, avg Toffoli 26,775 / 27,583 / 27,368), 47 s wall including the build on a 16-core, 48 GiB Mac. A full circuit, same day: a 10.1M-op, 1,156-Q ops.bin without a clean nonce gave identical counts from both evaluators (13 classical mismatches, 10 phase-garbage, 0 ancilla, same first failing shot 610 with the same got/exp points); fasteval 4.0 s / 1.29 GB RSS vs eval_circuit 13.5 s / 0.58 GB (fixed loader overhead dominates at 10M ops). The billion-op memory claim (33 GB at 1.24e9 ops) is BitWonka's, not re-measured here. BitWonka's own pin: harness c672dda (11 Oct). On main the five harness files last changed 22 Jun 2026 (c66c958: eval_circuit.rs, Cargo.toml; circuit.rs/sim.rs 29 May), so the pin and 6b0327d run the same evaluator.

Sibling tool in the same repo

dead-ccx-finder/: a bit-sliced screen for CCX/CCZ that are charged but never fire (cond & c1 & c2 == 0 on all ~9M inputs); removing them is value-neutral. Workflow and caveats: its README.md. After any op-stream edit, regenerate its index: a stale absolute index drops the wrong ops (see circuit-edit-integration-safety).

slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack."Stars: 197kUpdated Claude CodeCodexVerifiedInstall
ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt.Stars: 194kUpdated Claude CodeCodexVerifiedInstall