mohitmishra786/low-level-dev-skills / skills/baremetal/timers-pwm-baremetal
timers-pwm-baremetal
VerifiedBare-metal timer and PWM skill. Use when configuring general-purpose timers for PWM, input capture, or periodic ticks without RTOS. Activates on queries about timer prescaler, PWM duty cycle, input capture, or SysTick bare-metal.
Timers and PWM (Bare-Metal)
Purpose
Configure MCU timers for PWM output, input capture, and periodic scheduling: prescaler/ARR setup, compare channels, and SysTick as a simple tick source.
Triggers
- Motor/LED dimming via PWM
- Measuring pulse width (input capture)
- Bare-metal
millis()without FreeRTOS - Hardware periodic sampling trigger
Workflow
1. PWM on TIM2 CH1 (STM32)
f_pwm = f_timer_clk / ((PSC+1) * (ARR+1))
duty = (CCR / (ARR+1)) * 100%
RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
TIM2->PSC = 83; /* 84MHz / 84 = 1 MHz tick */
TIM2->ARR = 999; /* 1 kHz PWM */
TIM2->CCR1 = 500; /* 50% duty */
TIM2->CCMR1 |= (6U << TIM_CCMR1_OC1M_Pos); /* PWM mode 1 */
TIM2->CCER |= TIM_CCER_CC1E;
TIM2->CR1 |= TIM_CR1_CEN;
GPIO: PA0 AF1 TIM2_CH1.
2. SysTick tick
volatile uint32_t tick_ms;
void SysTick_Handler(void) {
tick_ms++;
}
void systick_init(uint32_t hz) {
SysTick_Config(SystemCoreClock / hz);
}
3. Input capture
Configure channel in CCMR as input, set CCER polarity, read CCR on interrupt when edge captured.
4. Agent usage
/timers-pwm-baremetal 1 kHz 25% duty PWM on TIM2 channel 1
Common Problems
| Symptom | Cause | Fix |
|---|---|---|
| Wrong frequency | APB timer clock doubling | Check RM timer clock x2 rule |
| No PWM output | CCER/CCMR not enabled | Enable channel output |
| Jittery tick | SysTick overridden | One owner for SysTick |
Related skills
skills/baremetal/gpio-baremetal— timer pin AFskills/embedded/freertos— replace SysTick with RTOS tickskills/baremetal/adc-dac-baremetal— timer TRGO for ADC trigger
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| reverse-engineer-anythingmorluto/reaReverse engineer native, managed, Electron/JavaScript, packaged, firmware, and browser targets with REA, and build agent environments (AgentEnv bundles) of web applications from a live instance or a capture, and of Linux desktop apps with a task from a request. Use shipped-artifact or requested runtime evidence to explain features, compare versions, decompile code, or guide a reconstruction. Skip REA for ordinary source-repository architecture analysis. | Stars: 471k | Updated | Claude CodeCodex | Verified | Install |
| diagnosing-superpowersobra/superpowersUse when a superpowers session went wrong and your human partner wants to know why — repeated work, ignored plans, stumbles, poor results, a skill that didn't fire, "it took too long", "why is it so expensive", "what is it doing" — or wants to build a bug report for the superpowers maintainers, for the current session or a past one identified by id or path, on any harness. | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| dispatching-parallel-agentsobra/superpowersUse when facing 2+ independent tasks that can be worked on without shared state or sequential dependencies | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| executing-plansobra/superpowersUse when executing an implementation plan in the current session as the implementer yourself — your human partner chose inline execution, or no subagent tool is available | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |