mohitmishra786/low-level-dev-skills / skills/baremetal/adc-dac-baremetal
adc-dac-baremetal
VerifiedBare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.
ADC and DAC (Bare-Metal)
Purpose
Configure ADC and DAC peripherals: channel selection, sampling times, calibration sequences, DMA circular buffers, and DAC static/dynamic output.
Triggers
- Reading analog sensors (temperature, voltage)
- Audio or control voltage output via DAC
- Continuous sampling with DMA
- Post-reset ADC calibration on STM32
Workflow
1. STM32 ADC single conversion
/* Enable ADC1 and GPIOA clock; PA0 analog mode */
ADC1->CR2 |= ADC_CR2_ADON;
for (volatile int i = 0; i < 10000; i++); /* stabilization — RM value */
ADC1->SMPR2 |= ADC_SMPR2_SMP0_2; /* 84 cycles sample time ch0 */
ADC1->SQR3 = 0; /* channel 0, 1 conversion */
ADC1->CR2 |= ADC_CR2_SWSTART;
while (!(ADC1->SR & ADC_SR_EOC))
;
uint16_t sample = ADC1->DR;
Run ADC_Calibration() / ADC_CR2_RSTCAL/CAL per RM on F1/F4 families.
2. DMA circular ADC
/* ADC1 → DMA2 Stream0, circular mode into buffer[64] */
/* Configure DMA: periph-to-mem, halfword, increment mem, circular */
ADC1->CR2 |= ADC_CR2_DMA | ADC_CR2_CONT;
DMA2_Stream0->CR |= DMA_SxCR_EN;
Half-transfer / transfer-complete IRQs for double buffering.
3. DAC output (STM32)
RCC->APB1ENR |= RCC_APB1ENR_DACEN;
DAC->CR |= DAC_CR_EN1;
DAC->DHR12R1 = 2048; /* mid-scale 3.3V reference */
4. Agent usage
/adc-dac-baremetal Set up ADC1 channel 0 with DMA circular buffer
Common Problems
| Symptom | Cause | Fix |
|---|---|---|
| Noisy readings | Short sample time | Increase SMP bits |
| Stuck EOC | Clock not enabled | RCC ADC enable |
| Wrong voltage | Vref not 3.3V | Measure VDDA; calibrate |
| DMA corrupt | Buffer alignment | Use uint16_t aligned buffer |
Related skills
skills/baremetal/dma-baremetal— ADC DMA streamsskills/baremetal/timers-pwm-baremetal— ADC external triggerskills/baremetal/gpio-baremetal— analog pin mode
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| reverse-engineer-anythingmorluto/reaReverse engineer native, managed, Electron/JavaScript, packaged, firmware, and browser targets with REA, and build agent environments (AgentEnv bundles) of web applications from a live instance or a capture, and of Linux desktop apps with a task from a request. Use shipped-artifact or requested runtime evidence to explain features, compare versions, decompile code, or guide a reconstruction. Skip REA for ordinary source-repository architecture analysis. | Stars: 471k | Updated | Claude CodeCodex | Verified | Install |
| diagnosing-superpowersobra/superpowersUse when a superpowers session went wrong and your human partner wants to know why — repeated work, ignored plans, stumbles, poor results, a skill that didn't fire, "it took too long", "why is it so expensive", "what is it doing" — or wants to build a bug report for the superpowers maintainers, for the current session or a past one identified by id or path, on any harness. | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| dispatching-parallel-agentsobra/superpowersUse when facing 2+ independent tasks that can be worked on without shared state or sequential dependencies | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| executing-plansobra/superpowersUse when executing an implementation plan in the current session as the implementer yourself — your human partner chose inline execution, or no subagent tool is available | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |