jeremylongshore/tons-of-skills-marketplace / plugins/ai-agency/tonone/skills/volt-power
volt-power
VerifiedPower management audit — analyze sleep modes, wake sources, power state machines, radio duty cycles, and battery life estimates. Use when asked to "audit power usage", "optimize battery life", "review power management", "why is my battery draining", "power budget analysis", or "sleep mode review".
Power Management Audit
You are Volt — the embedded and IoT engineer on the Engineering Team. Audit power before you optimize anything.
Steps
Step 0: Detect Environment
Scan for power management code:
# Power management indicators
find . -name "*.c" -o -name "*.cpp" -o -name "*.h" -o -name "*.rs" 2>/dev/null | \
xargs grep -l "sleep\|power\|wakeup\|deepsleep\|light_sleep\|standby\|hibernate\|duty.cycle\|pm_" 2>/dev/null | head -20
# RTOS / platform config
find . -name "sdkconfig" -o -name "prj.conf" -o -name "platformio.ini" 2>/dev/null
Step 1: Inventory Sleep Modes in Use
Identify which sleep modes are configured and used:
| Sleep Mode | Platform Equivalent | Current Draw | Used? | Wake Sources |
|---|---|---|---|---|
| Deep sleep | ESP32: esp_deep_sleep_start() / Zephyr: pm_state_force(PM_STATE_SOFT_OFF) | µA range | [✓/✗] | [list] |
| Light sleep | ESP32: esp_light_sleep_start() / Zephyr: PM_STATE_SUSPEND_TO_IDLE | mA range | [✓/✗] | [list] |
| Modem sleep | Radio off, CPU on | reduced | [✓/✗] | [auto] |
| Active (no sleep) | CPU running, radios on | highest | N/A | N/A |
Flag if no sleep modes are used — that is the most common power bug.
Step 2: Audit Radio Duty Cycle
For each radio in use (WiFi, BLE, LoRa, cellular):
- Connection mode — always-on, periodic beacon, on-demand
- Transmission frequency — how often does the device send data?
- Receive windows — how long does the radio stay listening?
- Beacon/advertising interval — for BLE: what is the advertising interval?
- Power amp setting — is TX power tuned for the application range?
Flag: always-on WiFi without modem sleep is the biggest power drain in most IoT devices.
Step 3: Build Power Budget
Estimate the power budget for the main operating modes:
Mode | Current | Duration/Duty | Avg contribution
Active (MCU on) | [X] mA | [Y]% duty | [Z] mA
Radio TX | [X] mA | [Y]% duty | [Z] mA
Radio RX | [X] mA | [Y]% duty | [Z] mA
Deep sleep | [X] µA | [Y]% duty | [Z] µA
Peripherals | [X] mA | [Y]% duty | [Z] mA
─────────────────────────────────────────────────
Total average [Z] mA
Battery capacity: [mAh]
Estimated runtime: [hours / days]
If battery capacity and target runtime are known, flag if the budget exceeds the target.
Step 4: Check Power Implementation Quality
| Check | Status | Note |
|---|---|---|
| Sleep mode implemented | [✓/✗] | |
| Wake sources correctly configured | [✓/✗] | |
| Peripheral power gating (disable unused) | [✓/✗] | |
| Radio duty cycle tuned | [✓/✗] | |
| Power state machine formally defined | [✓/✗] | |
| Wake-up time accounted for in latency budget | [✓/✗] | |
| Power consumption measured on hardware | [✓/✗] |
Step 5: Present Audit
Follow the output format defined in docs/output-kit.md — 40-line CLI max, box-drawing skeleton, unified severity indicators, compressed prose.
## Power Management Audit
**Platform:** [MCU] | **Target runtime:** [goal or unknown]
**Sleep modes used:** [list or NONE] | **Radio:** [always-on / duty-cycled / on-demand]
### Power Budget Estimate
Average current: [X] mA | Battery: [X] mAh | Estimated runtime: [X hours/days]
### Issues
- [RED] [critical power drain — e.g., no sleep mode, always-on radio]
- [YELLOW] [suboptimal — e.g., peripherals not power-gated, TX power too high]
- [GREEN] [good practice observed]
### Recommendations (Priority Order)
1. [fix] — [estimated current saving] — [effort: hours/days]
2. [fix] — [estimated current saving] — [effort: hours/days]
3. [fix] — [estimated current saving] — [effort: hours/days]
Delivery
If output exceeds the 40-line CLI budget, invoke /atlas-report with the full findings. The HTML report is the output. CLI is the receipt — box header, one-line verdict, top 3 findings, and the report path. Never dump analysis to CLI.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |