Griffing-Technology-LLC/engineering-pe-skills / skills/thermodynamics
thermodynamics
VerifiedThermodynamics, heat transfer, and fluid mechanics at FE level — properties of pure substances, first and second law, entropy, power and refrigeration cycles, conduction/convection/radiation heat transfer, fluid statics, continuity and the energy equation, dimensional analysis, and internal pipe flow. Use when computing cycle efficiency or COP, sizing a heat exchanger by LMTD or NTU, finding conductive or convective heat loss, applying Bernoulli's equation or the energy equation, computing head loss in a pipe, finding a Reynolds or Froude number, or working any FE-level thermal-fluid problem that feeds mechanical, chemical, aeronautical, naval architecture, or fire protection design.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 9.6 KB |
| references/fluid-mechanics.md | markdown | 4.2 KB |
| references/heat-transfer.md | markdown | 4.1 KB |
| references/thermodynamics.md | markdown | 4.5 KB |
references/fluid-mechanics.md
View on GitHub# Fluid Mechanics: Statics, Continuity, Energy Equation, Pipe Flow
Reference file for the `thermodynamics` skill. Standard FE-level treatment,
governed generally by the NCEES FE Reference Handbook [REF-NCEES-009]; formulas
below are conventional forms, not individually cited beyond that governing
framework. The Reynolds- and Froude-number scaling discussion in §4 hands off
directly to `naval-architecture-marine`'s resistance method, which applies
these same dimensionless groups to hull model testing under a primary-source
citation [REF-ITTC-001].
## 1. Fluid statics
$$p = p_0 + \rho g h$$
Hydrostatic pressure depends only on depth and fluid density, not on
container shape or orientation. **Manometers** apply this directly, summing
$\rho g h$ terms along the fluid path between reference points.
**Buoyancy** (Archimedes): a submerged or floating body experiences an upward
force equal to the weight of displaced fluid, acting through the centroid of
the displaced volume (the centre of buoyancy) — see
`naval-architecture-marine`'s hydrostatics reference for the full stability
treatment built on this principle.
## 2. Continuity
$$\dot m = \rho A V = \text{constant along a stream tube (steady flow)}$$
For incompressible flow, $\rho$ is constant and $AV = \text{constant}$ directly
— velocity increases where area decreases.
## 3. Energy equation
Bernoulli's equation, along a streamline, steady, incompressible, **inviscid**
flow:
$$\frac{p}{\rho g} + \frac{V^2}{2g} + z = \text{constant}$$
**Bernoulli is inviscid.** The moment a real duct, valve, fitting, pump, or
turbine enters the picture, extend it to the general energy equation with a
head-loss and machine-work term:
$$H_1 + h_p = H_2 + h_t + h_L, \quad H = \frac{p}{\rho g} + \frac{V^2}{2g} + z$$
$H$ — total head at a section; $h_p$, $h_t$ — pump and turbine head added or
removed; $h_L$ — total head loss between sections 1 and 2.
Write every term first, then drop only the ones that are actually negligible
for the specific problem, and state which ones and why — silently dropping
elevation or velocity head because they are "usually small" is how errors
enter.
## 4. Dimensionless groups — name the one that governs
$$Re = \frac{\rho V L}{\mu} = \frac{VL}{\nu}, \qquad Fr = \frac{V}{\sqrt{gL}}$$
* **Reynolds number** governs the balance of inertial to viscous forces —
laminar-vs-turbulent transition, pipe friction, boundary-layer behaviour.
* **Froude number** governs the balance of inertial to gravitational forces —
free-surface and wave phenomena (open-channel flow, ship wave-making).
`naval-architecture-marine` applies $Fr$ directly to hull resistance scaling,
citing the ITTC-57 procedure [REF-ITTC-001].
**A single small-scale model generally cannot match both $Re$ and $Fr$
simultaneously** at a practical scale ratio — this is why model testing in
naval architecture extrapolates resistance by component (frictional vs
wave-making) rather than by one overall coefficient; see
`naval-architecture-marine/references/resistance-and-propulsion.md` for the
full method.
## 5. Internal pipe flow and head loss
Laminar flow ($Re < 2300$, circular pipe): $f = 64/Re$ — independent of
surface roughness. Turbulent flow: $f$ depends on both $Re$ and relative
roughness $\varepsilon/D$ — read from the Moody chart or compute from the
Colebrook equation; roughness matters increasingly at higher $Re$.
**Darcy-Weisbach major loss:**
$$h_f = f\,\frac{L}{D}\,\frac{V^2}{2g}$$
**Minor losses** (fittings, valves, entrances, exits):
$$h_m = K\,\frac{V^2}{2g}$$
In a compact system with many fittings — exactly the kind of tightly-packed
routing this repository's own avionics and cape designs involve, by analogy —
minor losses routinely exceed the straight-run friction loss. Do not omit them
on short runs on the assumption that "minor" means negligible.
## 6. Out of scope here
Compressible (high-Mach) flow, open-channel flow beyond the Froude-number
definition above, and turbomachinery selection (pump/fan curves, NPSH,
affinity laws) are **PE-level design topics**, covered in
`mechanical-engineering/references/thermal-and-fluids.md`, not here. Hand off
explicitly rather than restating that material at FE level.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| brainstormingobra/superpowersYou MUST use this before any creative work - creating features, building components, adding functionality, modifying behavior, or planning anything new, in software or out of it (a talk, a business, a renovation). | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| brand-guidelinesanthropics/skillsApplies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| frontend-designanthropics/skillsGuidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| mcp-builderanthropics/skillsGuide for creating high-quality MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. Use when building MCP servers to integrate external APIs or services, whether in Python (FastMCP) or Node/TypeScript (MCP SDK). | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |