Griffing-Technology-LLC/engineering-pe-skills / skills/statics-and-dynamics
statics-and-dynamics
VerifiedStatics and rigid-body dynamics at FE level — free-body diagrams, equilibrium, trusses and frames, centroids and moments of inertia, friction, kinematics, Newton-Euler and work-energy methods, impulse-momentum, and vibration. Use when resolving forces or reactions, drawing a free-body diagram, analysing a truss or beam support, finding a centroid or second moment of area, checking a friction or tipping condition, computing acceleration of a linkage or mechanism, sizing for an inertial load, or working any equilibrium or rigid-body motion problem.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 6.8 KB |
| references/dynamics.md | markdown | 5.3 KB |
| references/section-properties.md | markdown | 2.8 KB |
| references/statics.md | markdown | 5.1 KB |
references/section-properties.md
View on GitHub# Centroids, Second Moments, and Mass Moments of Inertia
Reference file for the `statics-and-dynamics` skill.
## 1. Centroids
For a composite area built from parts of area $A_i$ with centroids $\bar{x}_i$:
$$\bar{x} = \frac{\sum A_i \bar{x}_i}{\sum A_i}, \qquad
\bar{y} = \frac{\sum A_i \bar{y}_i}{\sum A_i}$$
Holes and cut-outs enter with **negative area**, which is usually easier than
decomposing around them.
By symmetry, a centroid lies on every axis of symmetry — use this before
integrating anything.
## 2. Second moment of area
Also called area moment of inertia. About a centroidal axis:
$$I_x = \int y^{2}\,\mathrm{d}A, \qquad I_y = \int x^{2}\,\mathrm{d}A$$
Common sections, about the **centroidal** axis:
| Section | $I$ about centroid |
| --- | --- |
| Rectangle $b \times h$ | $I = bh^{3}/12$ (about the axis parallel to $b$) |
| Solid circle, diameter $d$ | $I = \pi d^{4}/64$ |
| Hollow circle, $d_o$, $d_i$ | $I = \pi (d_o^{4} - d_i^{4})/64$ |
| Triangle, base $b$, height $h$ | $I = bh^{3}/36$ |
**Polar** second moment, for torsion of circular sections:
$$J = I_x + I_y = \frac{\pi d^{4}}{32} \ \text{(solid circle)}$$
## 3. Parallel-axis theorem
To shift a second moment from the centroidal axis to a parallel axis at distance
$d$:
$$I = I_{cg} + A d^{2}$$
Two conditions are routinely violated. The theorem transfers **from the
centroidal axis only** — you cannot hop between two arbitrary parallel axes in
one step, and must return to the centroid first. And $d$ is measured to the
*section's own* centroid, not to the composite's.
For a composite section:
$$I_{total} = \sum \left( I_{cg,i} + A_i d_i^{2} \right)$$
The $Ad^2$ term usually dominates for material far from the axis, which is the
whole reason I-beams and tubes are efficient. **A hollow tube of the same mass as
a solid rod is dramatically stiffer in bending** — this is the single most useful
consequence of the theorem for real design.
## 4. Radius of gyration
$$k = \sqrt{\frac{I}{A}}$$
The distance at which the whole area could be concentrated to give the same $I$.
It is what column-buckling slenderness ratios are built from.
## 5. Mass moment of inertia
The dynamics counterpart, with dimensions of mass × length²:
$$I = \int r^{2}\,\mathrm{d}m$$
Common bodies about the centroidal axis:
| Body | $I$ |
| --- | --- |
| Slender rod, length $L$, about centre, transverse | $mL^{2}/12$ |
| Slender rod about one end, transverse | $mL^{2}/3$ |
| Solid cylinder, radius $r$, about its own axis | $mr^{2}/2$ |
| Solid sphere, radius $r$ | $2mr^{2}/5$ |
| Thin hoop, radius $r$, about its axis | $mr^{2}$ |
Parallel-axis applies identically:
$$I = I_{cg} + m d^{2}$$
**Watch the units.** In US customary, mass must be in slugs — or lbm divided by
$g_c$ — before it enters a mass moment of inertia. Using lbm directly gives an
answer wrong by a factor of 32.174.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack." | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |