arbiterForge/codeArbiter / plugins/ca-pi/skills/ca-standup
ca-standup
UnverifiedDaily repo hygiene — review the day's repo state, then perform selected cleanups. Fast-forward only, never destructive without a yes.
/ca-standup — daily hygiene
The checklist you run when you sit down to code. The SessionStart briefing reports hygiene state read-only; this command performs the cleanups you select. Arbiter gathers and proposes; you decide each action's scope.
Flow
The orchestrator reads the current repo state (reusing the briefing's read-only computation — branch, ahead/behind, dirty tree, stashes, prune-candidate branches, stale worktrees) and presents it, then offers each applicable action in turn. Skip an action that has no candidates. Branch deletions stay per-item; worktree removal and work archival may use one explicitly named selection. Never infer that a yes to one action authorizes another.
-
Fetch + fast-forward pull — kick
git fetch, then offer a--ff-onlypull of the current branch. Eligibility is the briefing summary'sff_pull_eligibleflag (SH-6: clean working tree AND behind upstream) — the same pure helper the SessionStart briefing computes, not a condition re-derived here. On a dirty tree the pull is withheld and the dirty state is reported instead. A diverged branch (would need a merge) is refused with a diverged-branch message — never a merge commit. -
Prune merged local branches — list local branches already merged on remote (the
: gone]upstream set), excluding the current branch and the default (main). Delete a listed branch only after an explicit per-branch confirmation; declining leaves it in place.A
: gone]branch that was squash-merged will typically refuse plaingit branch -d— its upstream is already pruned, so-dhas nothing to test reachability against. Before reporting that as a stop, check for a merged PR record:gh pr list --head <branch> --state merged --json headRefOid. When aMERGEDPR'sheadRefOidequals that branch's local tip, containment is proven andgit branch -Dis permitted — with the proof stated and the branch named in the confirmation — mirroring thepost-merge-cleanupPhase 5 contract. Without that proof, a refusal stays a report-and-stop; never guess. -
Remove stale worktrees — list stale/merged worktrees (branch gone-or-merged, or path missing on disk), never the main worktree. Present the full stale list together with each item's evidence, then offer removal as an explicitly enumerated group — one confirmation that names every member — as well as per-item confirmation for anyone who wants to keep some. Declining the group falls back to per-item confirmation, and declining any item leaves it intact.
-
Surface stashes / dirty / un-pushed — list stashes, uncommitted changes, and un-pushed commits, each with a suggested next step (
/ca-commit,git push,git stash show). Report-and-route only: never discard a stash, reset, or push. -
Selected-owner drift sweep — load the installed
../../includes/helper-invocation.mdcard relative to this loaded standup resource. Resolve its literalhooks/work.pyleaf and a compatible Python once; use the card's PowerShell or POSIX invocation for the current shell and never retry a failed helper under another interpreter (#577). Callwork.py list --limit 1to select the owner:owner: legacymeans the board, and aproject_idfield means native work. Stop if the command fails or returns neither shape. For the legacy owner, rungit logover the recent merge window (since the lastca-scoped tag, or a rolling 30-day window when no tag exists) and pipe it to the installedboardsync.py reconcilehelper resolved from the same loaded standup resource. Display DRIFTED tasks and informational UNKNOWN ids as advisory only. Resolve a drifted task through/ca-task done <id>; do not auto-flip the board. For the native owner, do not runboardsync.py: its dotted board IDs cannot establish native work state. Report that commit-to-work drift is not assessed by this sweep. A failed owner read is a stop for work hygiene, not permission to fall back to a second writer. -
Archival sweep — one named subset (B-24, WS-03). For the native owner, page the resolved
work.py list --limit 64 --budget 65536, passing the returned--membership-sha256on every later page. Inspect at most 256 entries in this sweep; state the omitted count if more remain. Select onlycompleteentries withcompleted_atstrictly more than 14 calendar days old.content_snapshot: falsemeans the preview is advisory; verify each selected item again on the archive branch before writing.For the legacy owner, retain the existing board classifier's dated done list and its exact dotted IDs or titles for ID-less rows. The work list can omit originless old rows; report its
unkeyed_countand inspect those rows through the legacy board owner. A title may target an ID-less row only after proving it uniquely identifies the selected current done row; refuse an ambiguous title. An undated item has unknown age and is excluded unless the user explicitly asks to include its exact ID with--allow-undated.Present the eligible IDs or unique legacy titles and dates, then ask once for a named subset to archive. The user may select all, some, or none. Do not infer inclusion from silence; preserve declined items. One selection authorizes only these IDs.
If at least one ID was selected: an archive is calendar-driven hygiene, not a consequence of any in-flight work, so it never rides another commit. Keep the current working tree and index, including its local
.codearbiter/.artifacts/journal, intact. Fetch the configured default branch and verify its fetched tip. Stop on fetch or ref failure. Choose a new sibling path outside the current repository and a unique branch name such aschore/work-archive-<YYYY-MM-DD>-<HHMMSSZ>. This is a dedicated branch for the sweep. Require that the target path does not exist and the branch name is unused. Rungit worktree add -b <branch> <fresh-path> <fetched-default-tip>; fail closed if the branch name already exists, and never reuse or overwrite the path. Verify the new worktree's HEAD is the fetched default tip and its working tree and index are clean before the first archive helper call. Run all subsequent reads and writes with the fresh worktree as the project cwd. Initialize its own local store through the installed helper as needed; preserve both worktrees' journals and do not copy or switch one between them.This worktree isolation is what makes the sweep committable at all: writing straight to disk on whatever branch happens to be current would either land on
main(refused outright) or mix into an unrelated feature branch's staged work (a type split under commit-gate Phase 3) — see #573. One fresh branch per sweep, never reused across sessions.In that fresh worktree, repeat
work.py list --limit 1and require the same owner (and nativeproject_id) selected in step 5; stop if it changed. Re-read every selected ID or unique legacy title and its state/date. If it is missing, no longer complete, or no longer eligible, stop that item and report the changed scope. Do not substitute a same-title item. For the native owner, use the resolvedwork.py get <work_id>to obtain the current revision and model hash. Archive each still-eligible item throughwork.py archive <work_id> --operation-id <stable-id> --expected-revision <revision> --expected-model-sha256 <hash>. Reuse that operation ID and expected pair if the response is lost; report a conflict without overwriting a later edit. For the legacy owner, re-read the exact board row and use the resolvedtaskwrite.py archive <exact-dotted-id>for an ID-carrying row, whether or not it has a work origin. For an ID-less row, usetaskwrite.py archive <unique-title>only after rechecking that the title still identifies exactly one completed row with the selected date. Pass--allow-undatedonly for an explicitly selected undated row. Stop if the row or its eligibility changed; never select the first same-title row.A selected set is one user choice, not one atomic write. Process IDs one at a time; on refusal, report completed and remaining IDs and retain the branch for recovery. The legacy helper's append to
done-tasks.mdbefore removing fromopen-tasks.mdremains its interrupted-sweep recovery order.Stage only the selected owner's changed paths: native
.codearbiter/work/<work_id>.htmlfiles, or legacy.codearbiter/open-tasks.mdand.codearbiter/done-tasks.md(including the first-created archive file). Route legacy board prose through/ca-chore docs; route native canonical work-state changes directly throughcommit-gatewith a homogeneouschoreclassification. Both use a dedicated archive commit and the normal PR path. Do not stage journals, generated compatibility views, or unrelated work.
Present a one-line summary of what was done and what was declined.
When NOT to use
- A read-only state snapshot without acting →
/ca-status. - Install health (interpreter, payload, hooks) →
/ca-doctor. - Committing staged work →
/ca-commit.
Hard gate
- MUST pull with
--ff-onlyand ONLY on a clean working tree — never a merge commit, never on a dirty tree, never a rebase. - MUST exclude the current branch and the default branch from branch pruning, and the main worktree from worktree cleanup.
- MUST confirm branch deletions individually — no batched or implied yes. Worktree removals MAY be confirmed as one explicitly enumerated group (naming every member) or individually; either way there is no implied yes, and declining the group falls back to per-item confirmation rather than removing anything.
- MUST treat stash / dirty / un-pushed state as report-and-route only — never discard, reset, force, or push on the user's behalf.
- MUST NOT write to or force-push the default branch.
- MUST NOT auto-flip any board entry during the drift sweep — the sweep is advisory
and read-only; resolving a drifted task is the user's decision and routes
exclusively through
/ca-task done <id>.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| receiving-code-reviewobra/superpowersUse when receiving code review feedback, before implementing suggestions, especially if feedback seems unclear or technically questionable - requires technical rigor and verification, not performative agreement or blind implementation | Stars: 318k | Updated | Claude CodeCodex | Unverified | Install |
| requesting-code-reviewobra/superpowersUse when completing tasks, implementing major features, or before merging to verify work meets requirements | Stars: 318k | Updated | Claude CodeCodex | Unverified | Install |
| using-git-worktreesobra/superpowersUse when starting feature work that needs isolation from current workspace or before executing implementation plans - ensures an isolated workspace exists via native tools or git worktree fallback | Stars: 318k | Updated | Claude CodeCodex | Unverified | Install |
| verification-before-completionobra/superpowersUse when about to claim work is complete, fixed, or passing, before committing or creating PRs - requires running verification commands and confirming output before making any success claims; evidence before assertions always | Stars: 318k | Updated | Claude CodeCodex | Unverified | Install |