a5c-ai/babysitter / library/specializations/cryptography-blockchain/skills/node-operations
node-operations
UnverifiedBlockchain node deployment and operations. Supports Ethereum execution and consensus clients, validator operations, node monitoring, MEV-Boost configuration, and archive node management.
Blockchain Node Operations Skill
Expert blockchain node deployment and operations for Ethereum and EVM-compatible networks.
Capabilities
- Execution Clients: Deploy Geth, Nethermind, Besu, Erigon
- Consensus Clients: Configure Prysm, Lighthouse, Teku, Lodestar
- Validator Operations: Set up validators with proper key management
- Monitoring: Monitor sync status and performance
- MEV-Boost: Configure for validators
- Archive Nodes: Set up archive nodes for indexing
- Migrations: Handle node upgrades and migrations
Execution Client Setup
Geth Installation
# Install Geth
sudo add-apt-repository -y ppa:ethereum/ethereum
sudo apt-get update
sudo apt-get install ethereum
# Or download binary
wget https://gethstore.blob.core.windows.net/builds/geth-linux-amd64-1.13.0-xxx.tar.gz
tar -xvf geth-linux-amd64-*.tar.gz
sudo mv geth-linux-amd64-*/geth /usr/local/bin/
Geth Configuration
# Create data directory
mkdir -p /var/lib/geth
# Create service file
cat > /etc/systemd/system/geth.service << EOF
[Unit]
Description=Geth Execution Client
After=network.target
Wants=network.target
[Service]
User=geth
Group=geth
Type=simple
Restart=always
RestartSec=5
ExecStart=/usr/local/bin/geth \
--mainnet \
--datadir /var/lib/geth \
--http \
--http.addr 0.0.0.0 \
--http.port 8545 \
--http.api eth,net,web3,engine,admin \
--ws \
--ws.addr 0.0.0.0 \
--ws.port 8546 \
--authrpc.addr localhost \
--authrpc.port 8551 \
--authrpc.vhosts localhost \
--authrpc.jwtsecret /var/lib/geth/jwt.hex \
--metrics \
--metrics.addr 0.0.0.0 \
--metrics.port 6060 \
--syncmode snap \
--maxpeers 50
[Install]
WantedBy=multi-user.target
EOF
# Generate JWT secret
openssl rand -hex 32 > /var/lib/geth/jwt.hex
# Start service
sudo systemctl daemon-reload
sudo systemctl enable geth
sudo systemctl start geth
Nethermind Configuration
cat > /etc/systemd/system/nethermind.service << EOF
[Unit]
Description=Nethermind Execution Client
After=network.target
[Service]
User=nethermind
Type=simple
Restart=always
ExecStart=/usr/local/bin/nethermind \
--config mainnet \
--datadir /var/lib/nethermind \
--JsonRpc.Enabled true \
--JsonRpc.Host 0.0.0.0 \
--JsonRpc.Port 8545 \
--JsonRpc.JwtSecretFile /var/lib/nethermind/jwt.hex \
--JsonRpc.EngineHost 127.0.0.1 \
--JsonRpc.EnginePort 8551 \
--Metrics.Enabled true \
--Metrics.ExposePort 6060 \
--Sync.SnapSync true
[Install]
WantedBy=multi-user.target
EOF
Consensus Client Setup
Lighthouse
# Install Lighthouse
curl -LO https://github.com/sigp/lighthouse/releases/download/v4.5.0/lighthouse-v4.5.0-x86_64-unknown-linux-gnu.tar.gz
tar -xvf lighthouse-*.tar.gz
sudo mv lighthouse /usr/local/bin/
# Beacon node service
cat > /etc/systemd/system/lighthouse-beacon.service << EOF
[Unit]
Description=Lighthouse Beacon Node
After=network.target geth.service
Wants=geth.service
[Service]
User=lighthouse
Type=simple
Restart=always
ExecStart=/usr/local/bin/lighthouse bn \
--network mainnet \
--datadir /var/lib/lighthouse \
--execution-endpoint http://localhost:8551 \
--execution-jwt /var/lib/geth/jwt.hex \
--checkpoint-sync-url https://beaconstate.ethstaker.cc \
--http \
--http-address 0.0.0.0 \
--http-port 5052 \
--metrics \
--metrics-address 0.0.0.0 \
--metrics-port 5054
[Install]
WantedBy=multi-user.target
EOF
Prysm
# Install Prysm
curl https://raw.githubusercontent.com/prysmaticlabs/prysm/master/prysm.sh --output prysm.sh
chmod +x prysm.sh
# Beacon node service
cat > /etc/systemd/system/prysm-beacon.service << EOF
[Unit]
Description=Prysm Beacon Node
After=network.target
[Service]
User=prysm
Type=simple
Restart=always
ExecStart=/usr/local/bin/prysm.sh beacon-chain \
--mainnet \
--datadir=/var/lib/prysm \
--execution-endpoint=http://localhost:8551 \
--jwt-secret=/var/lib/geth/jwt.hex \
--checkpoint-sync-url=https://beaconstate.ethstaker.cc \
--genesis-beacon-api-url=https://beaconstate.ethstaker.cc \
--grpc-gateway-host=0.0.0.0 \
--grpc-gateway-port=3500 \
--monitoring-host=0.0.0.0 \
--monitoring-port=8080
[Install]
WantedBy=multi-user.target
EOF
Validator Setup
Key Generation
# Install deposit-cli
wget https://github.com/ethereum/staking-deposit-cli/releases/download/v2.7.0/staking_deposit-cli-fdab65d-linux-amd64.tar.gz
tar -xvf staking_deposit-cli-*.tar.gz
# Generate validator keys
./deposit new-mnemonic --num_validators 1 --chain mainnet
# Import keys to Lighthouse
lighthouse account validator import \
--network mainnet \
--datadir /var/lib/lighthouse \
--directory validator_keys
# Import keys to Prysm
./prysm.sh validator accounts import \
--mainnet \
--keys-dir=validator_keys
Validator Client
# Lighthouse validator service
cat > /etc/systemd/system/lighthouse-validator.service << EOF
[Unit]
Description=Lighthouse Validator
After=lighthouse-beacon.service
Wants=lighthouse-beacon.service
[Service]
User=lighthouse
Type=simple
Restart=always
ExecStart=/usr/local/bin/lighthouse vc \
--network mainnet \
--datadir /var/lib/lighthouse \
--beacon-nodes http://localhost:5052 \
--graffiti "MyValidator" \
--metrics \
--metrics-address 0.0.0.0 \
--metrics-port 5064 \
--suggested-fee-recipient 0xYourAddress
[Install]
WantedBy=multi-user.target
EOF
MEV-Boost Setup
# Install MEV-Boost
go install github.com/flashbots/mev-boost@latest
# MEV-Boost service
cat > /etc/systemd/system/mev-boost.service << EOF
[Unit]
Description=MEV-Boost
After=network.target
[Service]
User=mevboost
Type=simple
Restart=always
ExecStart=/usr/local/bin/mev-boost \
-mainnet \
-relay-check \
-relay https://0xac6e77dfe25ecd6110b8e780608cce0dab71fdd5ebea22a16c0205200f2f8e2e3ad3b71d3499c54ad14d6c21b41a37ae@boost-relay.flashbots.net \
-relay https://0xa1559ace749633b997cb3fdacffb890aeebdb0f5a3b6aaa7eeeaf1a38af0a8fe88b9e4b1f61f236d2e64d95733327a62@relay.ultrasound.money
[Install]
WantedBy=multi-user.target
EOF
Monitoring
Prometheus Configuration
# prometheus.yml
scrape_configs:
- job_name: 'geth'
static_configs:
- targets: ['localhost:6060']
- job_name: 'lighthouse_beacon'
static_configs:
- targets: ['localhost:5054']
- job_name: 'lighthouse_validator'
static_configs:
- targets: ['localhost:5064']
Useful Monitoring Commands
# Check Geth sync status
geth attach http://localhost:8545 --exec "eth.syncing"
# Check Lighthouse sync status
curl -s http://localhost:5052/eth/v1/node/syncing | jq
# Check validator status
curl -s http://localhost:5052/eth/v1/beacon/states/head/validators/0x... | jq
# Check peer count
geth attach --exec "admin.peers.length"
curl -s http://localhost:5052/eth/v1/node/peers | jq '.data | length'
Archive Node Configuration
# Geth archive mode
ExecStart=/usr/local/bin/geth \
--mainnet \
--datadir /var/lib/geth \
--gcmode archive \
--syncmode full \
# ... other flags
# Erigon (optimized for archive)
ExecStart=/usr/local/bin/erigon \
--datadir /var/lib/erigon \
--chain mainnet \
--prune=htc \
# ... other flags
Process Integration
| Process | Purpose |
|---|---|
blockchain-node-setup.js | Node deployment |
validator-node-operation.js | Validator setup |
blockchain-indexer-development.js | Indexing infrastructure |
Best Practices
- Use checkpoint sync for faster initial sync
- Monitor disk space (archive nodes need TBs)
- Set up alerting for missed attestations
- Keep clients updated
- Use separate machines for execution and consensus
- Backup validator keys securely
See Also
agents/blockchain-infra/AGENT.md- Infrastructure expert- Ethereum.org Staking
- EthStaker
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| xlsxanthropics/skillsUse this skill any time a spreadsheet file is the primary input or output. This means any task where the user wants to: open, read, edit, or fix an existing .xlsx, .xlsm, .xltx, .csv, or .tsv file (e.g., adding columns, computing formulas, formatting, charting, cleaning messy data); create a new spreadsheet from scratch or from other data sources; or convert between tabular file formats. Trigger especially when the user references a spreadsheet file by name or path — even casually (like "the xlsx in my downloads") — and wants something done to it or produced from it. Also trigger for cleaning or restructuring messy tabular data files (malformed rows, misplaced headers, junk data) into proper spreadsheets. The deliverable must be a spreadsheet file. Do NOT trigger when the primary deliverable is a Word document, HTML report, standalone Python script, database pipeline, or Google Sheets API integration, even if tabular data is involved. | Stars: 195k | Updated | Claude CodeCodex | Verified | Install |
| shipping-and-launchaddyosmani/agent-skillsPrepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy. | Stars: 118k | Updated | Claude CodeCodex | Verified | Install |
| childhoodthedotmack/claude-memBabysit a shipped release after merge, publication, or deployment. Verify published packages, production behavior, installed plugins, and late CI or user reports until the observation window is clean; use babysit for PR readiness before release. | Stars: 117k | Updated | Claude CodeCodex | Unverified | Install |
| paperclip-pagepaperclipai/paperclipPublish static HTML pages and asset folders to the Paperclip S3/CloudFront page host. Use when asked to deploy, host, or share a persistent page, viewer, prototype, report, or static site without here.now. | Stars: 114k | Updated | Claude CodeCodex | Verified | Install |