Loading…
Showing 12361–12390 of 15645 skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| delta-wing-vortex-liftashfordeOU/aero-agent-skillsUse when you must estimate the vortex lift of a sharp-edged delta wing: apply the Polhamus leading-edge suction analogy to split the total lift into the attached potential term Kp sin(alpha) cos^2(alpha) and the leading-edge-separation vortex term Kv cos(alpha) sin^2(alpha), with the slender-wing potential slope Kp = pi AR / 2 and the vortex factor Kv growing linearly from 3.14 at AR 0 to about 3.45 at AR 4. Produces the total lift coefficient, the potential and vortex lift split, the vortex fraction, the drag due to lift CL tan(alpha), and the angle where vortex lift overtakes potential lift. Valid for sharp leading edges, subsonic flow, aspect ratio about 0.5 to 2.0, alpha up to about 25 degrees. Trigger: Polhamus suction analogy, leading edge suction, vortex lift, slender delta wing, nonlinear lift. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| drag-polarashfordeOU/aero-agent-skillsUse when you must compute the parabolic drag-polar of a wing from the zero-lift-drag coefficient cd0, the Oswald span-efficiency, and the aspect-ratio: calculate the induced-drag factor k with k = 1 / (pi * e * AR), the drag coefficient at a given lift coefficient, the lift-to-drag ratio at a point, and the maximum lift-to-drag ratio with its optimal lift coefficient. Also fit a parabolic drag-polar to two measured lift and drag points to recover cd0 and k. Produces the fitted polar coefficients and the peak performance values that gate the wing aerodynamic efficiency assessment. Trigger: drag-polar, parabolic, Oswald span-efficiency, induced-drag factor, aspect-ratio, cd0, lift-to-drag, max L/D, polar fit. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| lift-curve-slopeashfordeOU/aero-agent-skillsUse when you must estimate the lift curve slope of a wing from section data: compute the thin-airfoil section slope a0 = 2*pi per radian, correct it for finite aspect ratio with the lifting-line formula a = a0 / (1 + a0 / (pi * e * AR)), apply the simple sweep theory cosine correction, apply the Prandtl-Glauert Mach correction a / sqrt(1 - M^2) with a documented M < 0.7 limit, and predict lift coefficient from angle of attack with C_L = a * (alpha - alpha_zero), including an optional stall guard. Produces the corrected wing slope and lift coefficient for a given angle of attack that feed wing sizing and performance estimates. Trigger: lift curve slope, thin-airfoil theory, finite wing correction, aspect ratio, sweep correction, Prandtl-Glauert, lift coefficient. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| ground-effectashfordeOU/aero-agent-skillsUse when you must estimate the ground effect on a wing operating near the ground: compute the induced drag reduction factor and the induced drag ratio from the height to span ratio, apply the image vortex correction to the downwash and the effective aspect ratio, and estimate the lift increase and lift curve slope change in ground effect for takeoff and landing analysis. Produces the ground effect factor, the corrected induced drag, and the lift curve slope that feed low altitude performance estimates. Trigger: ground effect, induced drag reduction, image vortex, height to span ratio, ground cushion, takeoff lift. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| aerodynamic-heatingashfordeOU/aero-agent-skillsUse when you must estimate the aerodynamic heating at the stagnation point of a hypersonic body: stagnation-point convective heat flux from the Sutton-Graves correlation using freestream density, flight velocity and nose radius, radiation-equilibrium wall temperature from the Stefan-Boltzmann balance at a chosen surface emissivity, and the nose-radius bluntness trade that scales the flux for blunt versus sharp geometries. Produces the stagnation heat flux, the radiation-equilibrium temperature and the bluntness comparison that gate a thermal protection material choice. Trigger: aerodynamic heating, stagnation-point-heating, sutton-graves, radiation-equilibrium-temperature, nose-radius-bluntness, reentry heating, thermal protection. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| bow-shock-standoffashfordeOU/aero-agent-skillsUse when you must estimate the detached bow-shock standoff distance ahead of a blunt nose: compute the standoff ratio Delta over R with the classical Billig-form correlations for a sphere nose and a circular cylinder leading edge at gamma 1.4, convert the ratio to a physical standoff distance for a given nose radius, and report the trend checks that the standoff decreases with Mach and that the cylinder standoff exceeds the sphere standoff at the same Mach. Produces the standoff ratio, the standoff distance and the sanity flags that gate blunt-body nose-radius trades and shock-layer thickness estimates. Trigger: bow shock standoff, billig correlation, stagnation streamline, shock layer thickness, detached shock distance, blunt body nose radius. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| fanno-flowashfordeOU/aero-agent-skillsUse when you must solve the Fanno flow of a steady adiabatic constant-area duct with wall friction: evaluate the fanno-line integral fL*/D that chokes the duct from a Mach number, compute the friction-duct-choking length from the inlet Mach, recover the downstream Mach number for a given friction parameter fL/D on the subsonic or the supersonic branch, find the friction required to choke a duct of given length, and report the total-pressure loss ratio p0/p0* and the static pressure, temperature and density ratios to the sonic state along the duct. Produces the fL*/D values, choke lengths, downstream Mach numbers, friction to choke and the loss ratios that gate duct sizing and gas-dynamics coursework. Trigger: fanno flow, fanno line, friction duct, choking length, adiabatic duct friction, fL*/D. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| flat-plate-skin-friction-heatingashfordeOU/aero-agent-skillsUse when you must estimate the surface skin friction heating on a flat plate or vehicle skin at high Mach: it computes the recovery factor, adiabatic wall temperature, Eckert reference temperature, Sutherland viscosity, local skin friction coefficient and Reynolds-analogy heat transfer coefficient, then the cold-wall heat flux for a laminar or turbulent boundary layer. Produces the non-stagnation heating report with r, T_aw, T_star, Re_star, Cf, h_c and q_cold_wall in SI units for a thermal protection check. Trigger: recovery-factor, adiabatic-wall-temperature, cold-wall-heat-flux, reference-temperature-method, reynolds-analogy-factor, skin-friction-coefficient, turbulent-plate-heating, flat-plate-heating. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| hypersonic-flowashfordeOU/aero-agent-skillsUse when you must estimate aerodynamic forces on a body in hypersonic flow with modified Newtonian impact theory: stagnation pressure behind the normal shock (Rayleigh pitot relation), the finite-Mach stagnation pressure coefficient, local pressure by the Newtonian sine-squared law, the hypersonic vacuum limit on shadowed surfaces, and integrals over a sphere, cone and flat plate giving sphere drag, cone axial force, and flat plate lift, drag and lift-to-drag ratio. Produces the stagnation Cp and body force coefficients. Trigger: hypersonic flow, modified Newtonian theory, Newtonian impact pressure, stagnation pressure coefficient, blunt body drag, sphere drag coefficient, cone axial force, hypersonic vacuum limit. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| hypersonic-piston-theoryashfordeOU/aero-agent-skillsUse when you must estimate the surface pressure on a small-perturbation hypersonic surface by Lighthill piston theory: evaluate the piston-theory pressure ratio p/p_inf = (1 + ((gamma - 1)/2) v/a_inf)^(2 gamma/(gamma - 1)) from the piston velocity ratio, apply the linearized limit p/p_inf = 1 + gamma v/a_inf for a small piston velocity, split the compression side from the expansion side of the inclined surface, compute the surface-pressure coefficient Cp = 2/(gamma M^2) (p/p_inf - 1) from the freestream Mach and inclination on either side, and extend the same law to an unsteady surface whose normal motion adds to the geometric piston velocity. Produces the piston-theory surface-pressure ratios, the linearized limits and the per-side and instantaneous pressure coefficients that gate hypersonic panel pressure, stability derivative and oscillating-surface load estimates. Trigger: piston theory, hypersonic piston analogy, small perturbation hypersonic surface pressure, Lighthill. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| isentropic-flow-relationsashfordeOU/aero-agent-skillsUse when you must convert a Mach number into the isentropic total to static ratios of a compressible flow: the total temperature, pressure and density ratios of a perfect gas at gamma 1.4, rebuild total conditions from a static state and Mach number, recover the Mach number that produces a given area ratio from the area-Mach relation on the subsonic low branch or the supersonic high branch, and compute the choked mass flow a passage passes at its sonic throat from total pressure, total temperature and throat area. Produces the three total to static ratios, both Mach roots for the given area ratio and the choked mass flow in kg/s, the gate numbers for duct and wind tunnel analysis. Trigger: isentropic flow, total to static ratio, mach from area ratio, choked mass flow, sonic throat, wind tunnel contraction, compressible flow, mach number. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| normal-shockashfordeOU/aero-agent-skillsUse when you must compute normal shock relations for compressible flow: find the downstream Mach number, static pressure, density, and temperature ratios across the shock, and the stagnation pressure loss from the upstream Mach number. Produces the five shock ratios that gate inlet and high-speed aerodynamic analysis of a supersonic flow. Trigger: normal shock, oblique shock, mach number, compressible flow, pressure ratio, stagnation pressure, supersonic inlet, shock relations. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| oblique-shockashfordeOU/aero-agent-skillsUse when you must analyze an oblique shock in supersonic compressible flow: compute the wave angle beta from the upstream Mach number M1 and the flow deflection angle theta with the theta-beta-M relation, find the weak and strong solutions, the maximum deflection angle for an attached shock, and the downstream Mach number, static pressure, density, temperature, and stagnation pressure ratios across the shock. Covers shock polar basics: the weak branch keeps the flow supersonic with little stagnation pressure loss, the strong branch goes subsonic, and a deflection above the limit detaches the shock. Produces the wave angle, downstream state, and deflection limit for wedge, compression-corner, and inlet analyses. Trigger: oblique shock, shock wave, wave angle, deflection angle, theta-beta, wedge, compression corner, detached shock, shock polar, weak solution, strong solution, supersonic flow. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| prandtl-meyerashfordeOU/aero-agent-skillsUse when you must compute Prandtl-Meyer expansion relations for supersonic compressible flow: derive the expansion angle from the Mach number, find the downstream Mach number after the flow turns away from itself by a given angle, compute the total turning angle across the expansion fan, and the static pressure ratio across it. Produces the Prandtl-Meyer angle, the downstream Mach number, the turning angle, and the pressure ratio that gate supersonic airfoil, inlet, and nozzle analysis. Trigger: prandtl-meyer, expansion fan, mach number, supersonic flow, turning angle, compressible flow. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| rayleigh-flowashfordeOU/aero-agent-skillsUse when you must compute the rayleigh-flow state change of a perfect gas heated or cooled in a constant-area frictionless duct: convert the inlet Mach number into the Rayleigh-line ratios against the sonic state T/T*, p/p*, rho/rho*, T0/T0*, p0/p0*; find the maximum heat addition that thermally chokes the duct from a subsonic or supersonic inlet Mach number, q_max = cp*T1*(1 - M^2)^2/(2*(gamma+1)*M^2); recover the exit Mach number after a given heat addition per unit mass on the inlet branch; and report the entropy rise from the second law. Produces the station ratio set, the choking heat addition, the exit Mach and stagnation pressure ratio, and the entropy rise, in SI units, that gate the heat-addition duct assessment. Trigger: heat addition duct, thermal choking, rayleigh flow, rayleigh line, constant area frictionless duct. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| regular-shock-reflectionashfordeOU/aero-agent-skillsUse when you must compute the regular reflection of an oblique shock impinging on a wall or symmetry plane: solve the weak-branch incident wave angle at the upstream Mach number and deflection, march the state behind it, solve the reflected shock that turns the flow back parallel to the wall, and assemble the post-reflection state from the two shock ratio products. Produces the incident and reflected wave angles, the intermediate and post-reflection Mach numbers, the pressure, density, temperature and stagnation-pressure ratios, the reflected-shock detachment limit and the regular-versus-Mach verdict. Trigger: regular reflection, reflected shock, wall impingement, symmetry plane, two-shock interaction, Mach reflection, post-reflection state. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| shock-expansion-airfoilashfordeOU/aero-agent-skillsUse when you must compute the supersonic shock-expansion solution for a diamond (double-wedge) airfoil section: patch oblique-shock and Prandtl-Meyer relations over the four planar surfaces at a freestream Mach number and angle of attack, then integrate the panel pressures into the section lift, wave drag, and leading-edge moment coefficients with a surface pressure table. Implements theta-beta-M (weak solution), oblique-shock ratios, and the Prandtl-Meyer function internally for the turn-by-turn surface states. Produces cl, cd_wave, cm_le and per-surface Cp for a given half-angle, angle of attack, and Mach number. Trigger: shock-expansion, supersonic airfoil, diamond airfoil, double-wedge, surface-pressure integration, wave drag coefficient. | Stars: 8 | Updated | Claude CodeCodex | Verified | Install |
| lls-video-digesterPhilRobinluo/ai-coevolution-skills把用户提供或公开可用的字幕整理成带时间证据的观点、质疑点和行动清单。 当用户要处理相关材料并需要可验证交付物时使用。 | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| Apache Kafka Stream Processoragentskillexchange/skills | Stars: 65 | Updated | Claude CodeCodex | Verified | Install |
| proot-boundariesAlex72-py/termux-eliteDecide whether a failure belongs to native Termux or a proot distro and which side should own the package, interpreter, and project path. Use when something works in one environment but not the other, when Ubuntu or Debian runs under Termux, when a glibc-only binary is needed, or before installing, backing up, or resetting a proot distro. Do NOT use for ordinary native Termux package errors, and never use proot-distro reset or remove as a generic repair. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| termux-environmentAlex72-py/termux-eliteTake a small read-only snapshot of a Termux or Android shell (native Termux, proot, another Android shell, or a non-Android system; Android and Termux version, CPU architecture, installed toolchains, free storage and memory) before choosing a package manager, path, or fix. Use when a task depends on what the device is, when asked what is installed or which architecture applies, or at the start of any Termux debugging session. Do NOT use as a ritual before every command, for plain text questions, or to change anything. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-ap-arrikitrader/glawGLAW Accounts Payable / Receivable seat — vendor & customer subledgers, invoice and bill management, AR/AP aging buckets, 3-way match (PO ↔ receipt ↔ invoice), collections, and 1099-vendor tracking. Wraps the deterministic glaw-aging tool. Use for: 'accounts payable', 'accounts receivable', 'AP', 'AR', 'aging', 'invoice', 'who owes us', 'what do we owe', 'overdue', 'collections', '1099 vendors', '3-way match'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-back-taxesrikitrader/glawGLAW back-tax & IRS-collections seat — resolve a delinquent taxpayer end-to-end: file the missing years (built from the general ledger), replace any IRS Substitute-for-Return, roll the multi-year penalties and interest, then choose and build the collection alternative — installment agreement, offer in compromise (with the Reasonable Collection Potential calc), Currently-Not-Collectible, or a Collection Due Process request — plus the Trust Fund Recovery Penalty analysis for unpaid payroll tax. Every figure ties to the books; for a licensed attorney/CPA/EA to sign. Use for: 'back taxes', 'non-filer', 'unfiled returns', 'I owe the IRS', 'offer in compromise', 'installment agreement', 'currently not collectible', 'wage garnishment / levy', 'tax lien', 'trust fund recovery penalty', 'IRS collections'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-commandrikitrader/glawGLAW Master Command — the top-level intelligence-fusion orchestrator. Coordinates the FBI bureau, FinCEN financial-intelligence cell, CIA strategic-intelligence cell, SEC enforcement cell, IRS-CI/forensic-accounting, the lawyer seats, and the adversarial red-team over a case. ALWAYS produces an executive briefing; escalates to a full court-ready DOSSIER only when RED FLAGS surface. Use for: 'run the command', 'full intelligence workup', 'master fusion', 'investigate and brief', 'red-flag this case', 'should this be a dossier', 'fraud + financial-crime + securities workup', 'build the case file'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-conceptual-frameworkrikitrader/glawGLAW Conceptual Framework seat — the WHY behind every number. Explains, in plain English, the foundations of general-purpose financial reporting: the objective (decision-useful information for investors, lenders, and other creditors), the qualitative characteristics (fundamental: relevance incl. materiality, and faithful representation = complete, neutral, free from error; enhancing: comparability, verifiability, timeliness, understandability) under the cost constraint, the elements (asset, liability, equity, income, expense) and their definitions, recognition and derecognition, measurement bases (historical cost vs current/fair value), the reporting entity, and the underlying assumptions (going concern, accrual). Maps each concept to how GLAW posts and proves the numbers. Use for: 'conceptual framework', 'qualitative characteristics', 'relevance and faithful representation', 'definition of an asset/liability', 'recognition criteria', 'measurement basis', 'historical cost vs fair value', 'going concern', 'accrual basis', 'why do we book it this way', 'reporting entity'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-consolidationrikitrader/glawGLAW Multi-Entity Consolidation & Eliminations seat — combines a group of separately-kept ledger books (holdco/opco, parent/subsidiaries, fund tiers) into one consolidated set, then strips out the double-counting. Sums each entity's trial balance, posts elimination journal entries to a dedicated consolidation book (intercompany AR vs AP, intercompany sales vs COGS, investment-in-subsidiary vs the sub's equity), and carves out non-controlling (minority) interest where the parent owns less than 100%. Each entity is its own glaw-ledger --book; the consolidation nets them via glaw-journal. Use for: 'consolidate the group', 'consolidated financials', 'intercompany eliminations', 'parent and subsidiaries', 'holdco opco rollup', 'eliminate intercompany', 'minority interest', 'non-controlling interest', 'combine entities', 'consolidation book'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-consumer-protectionrikitrader/glawGLAW Consumer Protection seat — consumer-side claims and debt-collection defense under the FDCPA (15 U.S.C. § 1692), FCRA (§ 1681, credit-report disputes & reinvestigation), TCPA (§ 227, robocalls/texts), EFTA/TILA, and the state UDAP / Florida FDUTPA + FCCPA (§ 559) analogs. Validates the debt, attacks defective collection/credit conduct, computes statutory + actual damages, and drafts the dispute letter / debt-validation demand / answer + counterclaim. Every claim element-checked, run past an adversarial pass, for a licensed attorney to sign. Use for: 'debt collector', 'FDCPA', 'FCRA', 'credit report dispute', 'TCPA', 'robocall', 'spam text', 'debt validation', 'being sued on a debt', 'collection lawsuit', 'FDUTPA', 'FCCPA', 'unfair deceptive practices', 'identity theft credit', 'wrong on my credit report', 'garnishment defense'. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| glaw-daemonrikitrader/glawGLAW Autonomy Daemon — source-only standing-goal and docket watcher. Scans all matters for upcoming or missed deadlines, records run ledgers, routes work through glaw-loop, and respects the Oversight Board kill-switch. Use for: standing goals, docket daemon, deadline watcher, recurring compliance scan, autonomous monitor, or firm compliance watch. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| eli5transitive-bullshit/skillsExplain a topic like I'm a 5 year old. Use when the user types /eli5 <topic> or asks for a dead-simple picture explainer of how something works. | Stars: 5 | Updated | Claude CodeCodex | Verified | Install |
| sylph-setupgetnao/sylphPersonalize Sylph to your company. Ask the company name, then derive everything from the web - CONTEXT.md, brand voice, team, ICP, and standing instructions. | Stars: 220 | Updated | Claude CodeCodex | Verified | Install |