zrwangems/dsh-zrwang-plugin / skills/engineering/matlab/automotive/matlab-fit-tire-model
matlab-fit-tire-model
VerifiedFit a tire model (Magic Formula 6.2/5.2/5.1, Dugoff, or Fiala) to measured tire force and moment data using the Vehicle Dynamics Blockset Extended Tire Features API (tireData.import, tireModel.new, tireModel.fit, tireModel.export). Use when fitting, parameterizing, or calibrating a tire model from tire measurement data (TYDEX, Calspan, MTS, or text/CSV from any test source), creating a .tir file, or building a Magic Formula tire model from test data. Also use for the individual steps: importing TYDEX, Calspan, MTS, or CSV tire data (file extensions `.tdx` for TYDEX; `.data`, `.tim`, `.rsp` for MTS; any other extension read as text) into a tireData object, exporting a tire model to .tir, inspecting, smoothing, cropping, or plotting tire measurement data or a model's response, or converting a fitted model to another type.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 21.5 KB |
| manifest.yaml | config | 1.4 KB |
| references/advanced-fit-tuning.md | markdown | 4.2 KB |
| references/common-mistakes.md | markdown | 2.0 KB |
| references/convert-operation.md | markdown | 1.2 KB |
| references/fit-diagnostics.md | markdown | 8.5 KB |
| references/fit-type-data-requirements.md | markdown | 5.7 KB |
| references/inspect-by-plotting.md | markdown | 2.6 KB |
| references/worked-example.md | markdown | 3.4 KB |
references/inspect-by-plotting.md
View on GitHub# Inspect by Plotting (Supplementary)
Load this when the user asks to plot or visually inspect measurement data or a fitted model's
response.
Plotting is never required by the fit, but a human review often wants it, so offer it when
asked and reach for the shipped methods rather than pulling channels off the object and
calling generic `plot`. Hand-rolling reinvents the axis labels, unit scaling, and legend the
API derives from the channel metadata, and it invites fabricated labels or coordinate-frame
claims. When plotting is wanted, it can support several points in the workflow: inspect imported
channels after Step 1, check data before and after the Step 2 processing, and overlay the model on
its data to judge fit accuracy in Step 7. In each case offer it rather than producing a figure
unrequested.
**Measurement data, `tireData.plot`.** Renders the channels held in the `tireData` array.
Give it `DataVariableNames` (one, two, or three channel names for index-vs-value, x-vs-y, or
a 3-D plot), or omit it for the multi-panel autoplot. `ColorBy` groups lines by any property
(for example a load level) and `ColorByScheme` is `"Legend"` or `"Colorbar"`. Axes are
labeled and unit-scaled from the channel metadata; `FilterBy`/`FilterByValues` subselect
objects before plotting.
```matlab
% Plot measured lateral force against slip angle, colored by load.
td.plot(DataVariableNames=["alpha","Fy"], ColorBy="Fz");
% Or let autoplot lay out the common channels.
td.plot();
```
**Model response, `tireModel.plot`.** A model holds only parameters, so plotting runs a
compute cycle. Drive it from measured conditions with `Data=<tireData>`, optionally with
`FitType` to focus one fit type, or specify conditions directly with `Direction` ("alpha",
"gamma", "kappa", or "Fz") and `Magnitude` plus held values (`Fz`, `alpha`, `gamma`, `kappa`,
`IP`, `Vx`, `psidot`) to inspect behavior where you have no measurement data. `DataVariableNames`
selects which channels go on which axes. With no arguments it draws a canned 2x2. It delegates
the actual drawing to `tireData.plot`.
```matlab
% Overlay the fitted model on the data it was fit to, to judge accuracy.
mdl.plot(Data=subset, DataVariableNames=["alpha","Fy"], ColorBy="Fz");
% Inspect model behavior at loads you never measured.
mdl.plot(Direction="alpha", Magnitude=deg2rad([-12 12]), ...
Fz=[2000 4000 6000], DataVariableNames=["alpha","Fy"]);
```
When you only want to see a fit as it completes, `fit(mdl, data, FitType, PlotFit=true)`
triggers this same plot inline and returns the handle in `H`; the standalone calls above are
for inspecting outside a fit call.
----
Copyright 2026 The MathWorks, Inc.
----
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |