Skip to content

ThomasMoreAI/legal-skills-open / au/general/skills/format-aglc4-citations-l0cka

format-aglc4-citations-l0cka

Verified

Draft, convert, review, and correct Australian legal citations and bibliographies in Australian Guide to Legal Citation, 4th edition (AGLC4) format. Use for footnotes, pinpoints, subsequent references, cases, legislation, secondary sources, treaties, international materials, foreign legal materials, quotation treatment, citation audits, reference lists, or any document that contains legal or evidentiary citations. Do not use this skill to verify that a cited source exists or says what is claimed; formatting and source verification are separate tasks.

references/general-rules.md

View on GitHub
# AGLC4 general rules

Read this reference for every citation task. Rule numbers refer to AGLC4 chapter 1.

## Footnotes and placement — rules 1.1–1.3

- Footnote propositions, direct quotations, material relied on, and source-retrieval details. Give the first citation in full.
- Put a footnote number after sentence punctuation. Place it immediately after the relevant text only when that avoids ambiguity.
- Separate multiple sources in one footnote with semicolons, not `and`.
- When an introductory signal changes, start a new sentence within the footnote.
- End every footnote with a full stop or other appropriate closing punctuation.
- Put a pinpoint immediately after its citation. Do not prefix pages with `p`, `pp`, `pg`, or `at`.
- Put paragraph pinpoints in separate square brackets: `[14]`, `[14]–[18]`. Use `para` only for source types that require it, including legislation and some international documents.
- If both page and paragraph are useful, use `page [paragraph]`: `127 [36]`.
- Separate multiple pinpoints with commas. Use a non-spaced en dash for a span and shorten the ending number except for paragraph spans: `431–2`, `[57]–[63]`, `312–13 [5]–[11]`.
- Cite a footnote within a source as `page n footnote-number` and a span as `nn`: `46 n 7`, `46 nn 7–8`.

Use a phrase such as `quoting`, `quoted in`, `citing`, `cited in`, `discussing`, or `discussed in` when the relationship between two sources matters. Precede the phrase with a comma.

## Introductory signals — rule 1.2

| Signal | Use |
|---|---|
| no signal | the source is quoted or directly supports the proposition |
| `See` | qualified support |
| `See, eg,` | one of several supporting authorities |
| `See also` | additional or general support |
| `See especially` | strongest of several supporting authorities |
| `See generally` | background material |
| `Cf` | useful contrast |
| `But see` | partial disagreement |

Do not use a signal mechanically. Match it to the relationship between the proposition and source.

## Subsequent references — rule 1.4

### Cross-references

- Cases and legislation: `Short Title (n Footnote Number) Pinpoint`.
- Most secondary sources: `Author Surname (n Footnote Number) Pinpoint`.
- Several works by the same author: `Author Surname, Short Title (n Footnote Number) Pinpoint`.
- Authors with the same surname: use the authors' full names as shown on the sources.
- No author or a body author better identified by title: `Short Title (n Footnote Number) Pinpoint`.
- Keep the short title in the same style as the full title: italics for a book, single quotation marks for an article.

Introduce a short title after the complete first citation, after pinpoints and parenthetical clauses: `(‘Short Title’)`. Use a popular or first-party name for cases unless the Crown is first, in which case the second party is generally clearer.

### `Ibid`

Use `Ibid` only for the sole source in the immediately preceding footnote.

- Same source and same pinpoint: `Ibid.`
- Same source and a different pinpoint: `Ibid 24.`
- Preceding footnote has multiple sources: use `(n X)`, not `Ibid`.
- Preceding footnote has a pinpoint but the new citation refers to the source generally: use `(n X)`, not `Ibid`.
- Within the same footnote, use `at` for a later pinpoint to the immediately preceding source; do not use `ibid`.

Recheck every `Ibid` and `(n X)` after inserting, deleting, or reordering footnotes.

## Quotations — rule 1.5

- Use single quotation marks for a quotation of three lines or fewer.
- Set a quotation of four lines or more as an indented, smaller-font block without quotation marks. A legislative or treaty extract may use block form regardless of length.
- Preserve the source wording. Put alterations and insertions in square brackets.
- Indicate omissions with a spaced ellipsis: ` … `. Do not use a leading ellipsis.
- Alter the first letter's case with square brackets where needed.
- Put `[sic]` after a significant source error, not a spelling variant or unusual capitalisation.
- Use double quotation marks inside a short single-quoted passage. In a block quote, use single quotation marks for an internal quotation.
- Put the source footnote immediately after the quotation or the proposition it supports.
- Add `(emphasis added)` or `(emphasis in original)` after the pinpoint when relevant.

## Typography, punctuation, and language — rules 1.6–1.12

- Use Australian English and the source's official spelling unless a quotation rule permits alteration.
- Omit full stops in abbreviations. Keep full stops that form part of an identifier such as a UN document number.
- Use single quotation marks. Put punctuation outside the closing quotation mark unless it forms part of the quoted material.
- Italicise case names, legislation, treaty titles, books, journals, and other source titles only as their source-specific rule requires.
- Do not italicise report-series abbreviations, party `v`, citation punctuation, or translations in square brackets.
- Use an en dash for number and date spans and to join treaty parties; use an em dash for a break in a sentence.
- Use numerals for numbers above nine and for footnotes, pages, sections, parts, divisions, percentages, measurements, dates, and times. Spell zero to nine in ordinary prose subject to AGLC4 exceptions.
- Write full dates as `1 January 2026`. Use `10:30 am` for time, and `00:14:20` for a recording pinpoint where hours are relevant.
- Follow the target document's approved heading style. AGLC4 rule 1.12 is suggestive, not mandatory.

## Bibliographies — rule 1.13

Include every source relied on, not only sources cited in the text or footnotes. A conventional structure is:

1. Articles/Books/Reports
2. Cases
3. Legislation
4. Treaties
5. Other

Keep each citation in its source-specific AGLC4 form, with these changes:

- invert only the first author's first name and surname and separate them with a comma;
- do not invert later authors;
- omit the final full stop; and
- alphabetise by first author's surname, then first name, then later authors, then title. For a body author, sort by the first significant word of the body name. With no author, sort by the first significant word of the title. Ignore initial `The` when sorting.
rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first.Stars: 194kUpdated Claude CodeCodexVerifiedInstall