Skip to content

team-telnyx/ai / providers/claude/plugins/telnyx-platform/skills/telnyx-account-access-ruby

telnyx-account-access-ruby

Verified

Configure account addresses, authentication providers, IP access controls, billing groups, and integration secrets. This skill provides Ruby SDK examples.

FileKindSize
SKILL.mdskill md14.5 KB
---
name: telnyx-account-access-ruby
description: >-
  Configure account addresses, authentication providers, IP access controls,
  billing groups, and integration secrets. This skill provides Ruby SDK
  examples.
metadata:
  author: telnyx
  product: account-access
  language: ruby
  generated_by: telnyx-openapi-pipeline
---

<!-- Auto-generated from Telnyx OpenAPI specs. Do not edit. -->

# Telnyx Account Access - Ruby

## Installation

```bash
gem install telnyx
```

## Setup

```ruby
require "telnyx"

client = Telnyx::Client.new(
  api_key: ENV["TELNYX_API_KEY"], # This is the default and can be omitted
  public_key: ENV["TELNYX_PUBLIC_KEY"], # Required for client.webhooks.unwrap (webhook verification)
)
```

All examples below assume `client` is already initialized as shown above.

## Error Handling

All API calls can fail with network errors, rate limits (429), validation errors (422),
or authentication errors (401). Always handle errors in production code:

```ruby
begin
  result = client.messages.send_(to: "+13125550001", from: "+13125550002", text: "Hello")
rescue Telnyx::Errors::APIConnectionError
  puts "Network error — check connectivity and retry"
  raise
rescue Telnyx::Errors::RateLimitError
  # 429: rate limited — wait, then retry the request (bounded exponential backoff)
  sleep(1) # Check Retry-After header for actual delay
  # ...retry the call here (give up after a few attempts); otherwise re-raise:
  raise
rescue Telnyx::Errors::APIStatusError => e
  puts "API error #{e.status}: #{e.message}"
  if e.status == 422
    puts "Validation error — check required fields and formats"
  end
  raise # A failed request must never look like success to the caller
end
```

Common error codes: `401` invalid API key, `403` insufficient permissions,
`404` resource not found, `422` validation error (check field formats),
`429` rate limited (retry with exponential backoff).

## Important Notes

- **Pagination:** Use `.auto_paging_each` for automatic iteration: `page.auto_paging_each { |item| puts item.id }`.

## List all Access IP Addresses

Retrieve a paginated list of access IP addresses configured on your account.

`GET /access_ip_address`

```ruby
page = client.access_ip_address.list

puts(page)
```

Returns: `created_at` (date-time), `description` (string), `id` (string), `ip_address` (string), `source` (string), `status` (enum: pending, added), `updated_at` (date-time), `user_id` (string)

## Create new Access IP Address

Create a new access IP address entry on your account.

`POST /access_ip_address` — Required: `ip_address`

Optional: `description` (string)

```ruby
access_ip_address_response = client.access_ip_address.create(ip_address: "203.0.113.10")

puts(access_ip_address_response)
```

Returns: `created_at` (date-time), `description` (string), `id` (string), `ip_address` (string), `source` (string), `status` (enum: pending, added), `updated_at` (date-time), `user_id` (string)

## Retrieve an access IP address

Retrieve the details of a specific access IP address.

`GET /access_ip_address/{access_ip_address_id}`

```ruby
access_ip_address_response = client.access_ip_address.retrieve("access_ip_address_id")

puts(access_ip_address_response)
```

Returns: `created_at` (date-time), `description` (string), `id` (string), `ip_address` (string), `source` (string), `status` (enum: pending, added), `updated_at` (date-time), `user_id` (string)

## Delete access IP address

Delete an access IP address entry from your account.

`DELETE /access_ip_address/{access_ip_address_id}`

```ruby
access_ip_address_response = client.access_ip_address.delete("access_ip_address_id")

puts(access_ip_address_response)
```

Returns: `created_at` (date-time), `description` (string), `id` (string), `ip_address` (string), `source` (string), `status` (enum: pending, added), `updated_at` (date-time), `user_id` (string)

## List all addresses

Returns a paginated list of the addresses on your account, with support for filtering and sorting.

`GET /addresses`

```ruby
page = client.addresses.list

puts(page)
```

Returns: `address_book` (boolean), `administrative_area` (string), `borough` (string), `business_name` (string), `country_code` (string), `created_at` (string), `customer_reference` (string), `extended_address` (string), `first_name` (string), `id` (string), `last_name` (string), `locality` (string), `neighborhood` (string), `phone_number` (string), `postal_code` (string), `record_type` (string), `street_address` (string), `updated_at` (string), `validate_address` (boolean)

## Creates an address

Creates a new address on your account from the provided details, for use with services that require a physical address such as emergency calling and regulatory compliance. By default, the new record is validated for emergency use at creation time.

`POST /addresses` — Required: `first_name`, `last_name`, `business_name`, `street_address`, `locality`, `country_code`

Optional: `address_book` (boolean), `administrative_area` (string), `borough` (string), `customer_reference` (string), `extended_address` (string), `neighborhood` (string), `phone_number` (string), `postal_code` (string), `validate_address` (boolean)

```ruby
address = client.addresses.create(
  business_name: "Toy-O'Kon",
  country_code: "US",
  first_name: "Alfred",
  last_name: "Foster",
  locality: "Austin",
  street_address: "600 Congress Avenue"
)

puts(address)
```

Returns: `address_book` (boolean), `administrative_area` (string), `borough` (string), `business_name` (string), `country_code` (string), `created_at` (string), `customer_reference` (string), `extended_address` (string), `first_name` (string), `id` (string), `last_name` (string), `locality` (string), `neighborhood` (string), `phone_number` (string), `postal_code` (string), `record_type` (string), `street_address` (string), `updated_at` (string), `validate_address` (boolean)

## Validate an address

Validates an address for emergency services.

`POST /addresses/actions/validate` — Required: `country_code`, `street_address`, `postal_code`

Optional: `administrative_area` (string), `extended_address` (string), `locality` (string)

```ruby
response = client.addresses.actions.validate(
  country_code: "US",
  postal_code: "78701",
  street_address: "600 Congress Avenue"
)

puts(response)
```

Returns: `errors` (array[object]), `record_type` (string), `result` (enum: valid, invalid), `suggested` (object)

## Retrieve an address

Retrieves the details of an existing address.

`GET /addresses/{id}`

```ruby
address = client.addresses.retrieve("550e8400-e29b-41d4-a716-446655440000")

puts(address)
```

Returns: `address_book` (boolean), `administrative_area` (string), `borough` (string), `business_name` (string), `country_code` (string), `created_at` (string), `customer_reference` (string), `extended_address` (string), `first_name` (string), `id` (string), `last_name` (string), `locality` (string), `neighborhood` (string), `phone_number` (string), `postal_code` (string), `record_type` (string), `street_address` (string), `updated_at` (string), `validate_address` (boolean)

## Deletes an address

Permanently deletes the specified address from your account.

`DELETE /addresses/{id}`

```ruby
address = client.addresses.delete("550e8400-e29b-41d4-a716-446655440000")

puts(address)
```

Returns: `address_book` (boolean), `administrative_area` (string), `borough` (string), `business_name` (string), `country_code` (string), `created_at` (string), `customer_reference` (string), `extended_address` (string), `first_name` (string), `id` (string), `last_name` (string), `locality` (string), `neighborhood` (string), `phone_number` (string), `postal_code` (string), `record_type` (string), `street_address` (string), `updated_at` (string), `validate_address` (boolean)

## Accepts this address suggestion as a new emergency address for Operator Connect and finishes the uploads of the numbers associated with it to Microsoft.

Accept the validated address suggestion for this address, replacing the original values, and finish uploading the numbers associated with it to Microsoft for Operator Connect.

`POST /addresses/{id}/actions/accept_suggestions`

Optional: `id` (string)

```ruby
response = client.addresses.actions.accept_suggestions("182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e")

puts(response)
```

Returns: `accepted` (boolean), `id` (uuid), `record_type` (enum: address_suggestion)

## List all SSO authentication providers

Returns a list of your SSO authentication providers.

`GET /authentication_providers`

```ruby
page = client.authentication_providers.list

puts(page)
```

Returns: `activated_at` (date-time), `active` (boolean), `created_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (string), `settings` (object), `short_name` (string), `updated_at` (date-time)

## Creates an authentication provider

Creates a new authentication provider for single sign-on, configured from the provided identity provider details, and returns the created resource.

`POST /authentication_providers` — Required: `name`, `short_name`, `settings`

Optional: `active` (boolean), `settings_url` (uri)

```ruby
authentication_provider = client.authentication_providers.create(
  name: "Okta",
  settings: {
    idp_cert_fingerprint: "13:38:C7:BB:C9:FF:4A:70:38:3A:E3:D9:5C:CD:DB:2E:50:1E:80:A7",
    idp_entity_id: "https://myorg.myidp.com/saml/metadata",
    idp_sso_target_url: "https://myorg.myidp.com/trust/saml2/http-post/sso"
  },
  short_name: "myorg"
)

puts(authentication_provider)
```

Returns: `activated_at` (date-time), `active` (boolean), `created_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (string), `settings` (object), `short_name` (string), `updated_at` (date-time)

## Retrieve an authentication provider

Retrieves the details of an existing authentication provider.

`GET /authentication_providers/{id}`

```ruby
authentication_provider = client.authentication_providers.retrieve("550e8400-e29b-41d4-a716-446655440000")

puts(authentication_provider)
```

Returns: `activated_at` (date-time), `active` (boolean), `created_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (string), `settings` (object), `short_name` (string), `updated_at` (date-time)

## Update an authentication provider

Updates settings of an existing authentication provider.

`PATCH /authentication_providers/{id}`

Optional: `active` (boolean), `name` (string), `settings` (object), `settings_url` (uri), `short_name` (string)

```ruby
authentication_provider = client.authentication_providers.update("550e8400-e29b-41d4-a716-446655440000")

puts(authentication_provider)
```

Returns: `activated_at` (date-time), `active` (boolean), `created_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (string), `settings` (object), `short_name` (string), `updated_at` (date-time)

## Deletes an authentication provider

Deletes an existing authentication provider.

`DELETE /authentication_providers/{id}`

```ruby
authentication_provider = client.authentication_providers.delete("550e8400-e29b-41d4-a716-446655440000")

puts(authentication_provider)
```

Returns: `activated_at` (date-time), `active` (boolean), `created_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (string), `settings` (object), `short_name` (string), `updated_at` (date-time)

## List all billing groups

Retrieve a paginated list of billing groups on your account.

`GET /billing_groups`

```ruby
page = client.billing_groups.list

puts(page)
```

Returns: `created_at` (date-time), `deleted_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (enum: billing_group), `updated_at` (date-time)

## Create a billing group

Create a new billing group, which can be used to organize resources for billing purposes.

`POST /billing_groups`

Optional: `name` (string)

```ruby
billing_group = client.billing_groups.create

puts(billing_group)
```

Returns: `created_at` (date-time), `deleted_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (enum: billing_group), `updated_at` (date-time)

## Get a billing group

Retrieve the details of a specific billing group.

`GET /billing_groups/{id}`

```ruby
billing_group = client.billing_groups.retrieve("f5586561-8ff0-4291-a0ac-84fe544797bd")

puts(billing_group)
```

Returns: `created_at` (date-time), `deleted_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (enum: billing_group), `updated_at` (date-time)

## Update a billing group

Update the properties of an existing billing group.

`PATCH /billing_groups/{id}`

Optional: `name` (string)

```ruby
billing_group = client.billing_groups.update("f5586561-8ff0-4291-a0ac-84fe544797bd")

puts(billing_group)
```

Returns: `created_at` (date-time), `deleted_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (enum: billing_group), `updated_at` (date-time)

## Delete a billing group

Delete a billing group from your account.

`DELETE /billing_groups/{id}`

```ruby
billing_group = client.billing_groups.delete("f5586561-8ff0-4291-a0ac-84fe544797bd")

puts(billing_group)
```

Returns: `created_at` (date-time), `deleted_at` (date-time), `id` (uuid), `name` (string), `organization_id` (uuid), `record_type` (enum: billing_group), `updated_at` (date-time)

## List integration secrets

Retrieve a list of all integration secrets configured by the user.

`GET /integration_secrets`

```ruby
page = client.integration_secrets.list

puts(page)
```

Returns: `created_at` (date-time), `id` (string), `identifier` (string), `record_type` (string), `updated_at` (date-time)

## Create a secret

Create a new secret with an associated identifier that can be used to securely integrate with other services.

`POST /integration_secrets` — Required: `identifier`, `type`

Optional: `password` (string), `token` (string), `username` (string)

```ruby
integration_secret = client.integration_secrets.create(identifier: "my_secret", type: :bearer)

puts(integration_secret)
```

Returns: `created_at` (date-time), `id` (string), `identifier` (string), `record_type` (string), `updated_at` (date-time)

## Delete an integration secret

Delete an integration secret given its ID.

`DELETE /integration_secrets/{id}`

```ruby
result = client.integration_secrets.delete("550e8400-e29b-41d4-a716-446655440000")

puts(result)
```

## Create an Access Token.

Create an Access Token (JWT) for the credential.

`POST /telephony_credentials/{id}/token`

```ruby
response = client.telephony_credentials.create_token("550e8400-e29b-41d4-a716-446655440000")

puts(response)
```
rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first.Stars: 194kUpdated Claude CodeCodexVerifiedInstall