Skip to content

Sushegaad/Claude-Skills-Governance-Risk-and-Compliance / plugins/itar/skills/itar

Expert ITAR compliance advisor for US defense contractors, exporters, and manufacturers. Use this skill for any question about 22 CFR Parts 120-130, the United States Munitions List (USML), DDTC registration, export license applications (DSP-5/73/94), Technical Assistance Agreements (TAA), Manufacturing License Agreements (MLA), brokering regulations (Part 129), deemed export rules for foreign nationals, technology control plans, voluntary disclosures, violation mitigation, jurisdiction determination (ITAR vs EAR), or US Munitions List category scoping. Trigger even if the user doesn't say "skill" - any ITAR or US defense export control question should use this skill.

FileKindSize
SKILL.mdskill md13.6 KB
references/compliance-program.mdmarkdown7.9 KB
references/licensing-guide.mdmarkdown7.0 KB
references/usml-categories.mdmarkdown5.8 KB

references/licensing-guide.md

View on GitHub
# ITAR Licensing Guide - 22 CFR Parts 123–125

## License Types at a Glance

| License / Agreement | CFR Reference | Purpose | Typical Use |
|--------------------|---------------|---------|-------------|
| DSP-5 | 22 CFR § 123.1 | Permanent export of defense articles | Hardware sale/transfer to foreign end-user |
| DSP-73 | 22 CFR § 123.5 | Temporary export | Trade shows, testing, repair abroad |
| DSP-61 | 22 CFR § 123.3 | Temporary import of unclassified defense articles | Foreign defense article entering US temporarily (exemptions: § 123.4) |
| DSP-94 | 22 CFR § 126.6(c) | Authority to Export Defense Articles Sold Under the FMS Program | Exports under Foreign Military Sales cases |
| DSP-83 | 22 CFR § 123.10 | Nontransfer and Use Certificate | Required for SME and classified exports |
| Technical Assistance Agreement (TAA) | 22 CFR § 124.1 | Export of technical data / defense services | Engineering support, training, design assistance |
| Manufacturing License Agreement (MLA) | 22 CFR § 124.2 | Licensed foreign manufacture | Overseas production of US defense articles |
| Warehouse/Distribution Agreement | 22 CFR § 124.14 | Stocking items abroad for resale | Distributor model |

**Permanent imports are not DDTC jurisdiction:** permanent imports of defense articles are regulated by DOJ/ATF under 27 CFR Part 447 via ATF Form 6 (see 22 CFR § 123.2). Note also: 22 CFR § 123.6 covers foreign trade zones and bonded warehouses; § 123.9 covers country of ultimate destination and reexports/retransfers.

---

## DSP-5 (Permanent Export License)

### When Required
Any export of USML hardware not covered by an exemption.

### Application Requirements
Submit via DDTC's D-Trade portal:
- **Block 1**: Applicant (DDTC registration number)
- **Block 2**: Country of ultimate destination
- **Block 3**: Foreign end-user name and address
- **Block 4**: Description of articles (USML category, quantity, value)
- **Block 5**: End-use statement (intended use, no re-export without US government approval)
- **Supporting docs**: Purchase order, end-user certificate, import certificate if required by destination country

### Processing Times
- Standard: 30–60 days
- Significant Military Equipment (SME): may require Congressional notification (22 USC § 2776) for sales ≥$14M

### License Conditions (common)
- Items may not be re-exported without prior DDTC authorisation
- End-user restrictions apply
- US government access rights for audits
- 4-year validity; extendable

---

## DSP-73 (Temporary Export)

### When Required
Hardware leaving the US temporarily (not for resale/transfer to foreign ownership).

### Key Requirements
- Describe items precisely; document serial numbers
- State duration and purpose (e.g., "air show display," "field test," "repair and return")
- Items must return to the US by the license expiry date
- License conditions prohibit use in combat, operational deployment

---

## Technical Assistance Agreement (TAA)

### Purpose
Authorises the export of **technical data** and/or **defense services** to specific foreign persons/entities. Required even for oral disclosure of ITAR-controlled technical data to a foreign national.

### Required TAA Clauses (22 CFR § 124.9)
1. **Scope of agreement**: Precise description of technical data / defense services
2. **Parties**: US licensor + all foreign licensees, authorised sub-licensees
3. **Retransfer prohibition**: No further disclosure/transfer without prior written DDTC approval
4. **US government rights**: US government may review all records; terminate agreement
5. **Record-keeping**: 5-year retention
6. **Audit rights**: US licensor right to audit foreign licensee compliance
7. **Term**: No fixed regulatory term; approvals commonly run up to 10 years (renew before expiry)
8. **Security classification handling** (if applicable)

### Amendment Requirements
Any change to scope, parties, or authorised countries requires a formal amendment approved by DDTC.

### Common TAA Uses
- Sharing engineering drawings with foreign manufacturer
- Providing maintenance training to foreign military
- Technical support under FMS (Foreign Military Sales) cases
- Joint development programmes with foreign partners

---

## Manufacturing License Agreement (MLA)

### Purpose
Allows a foreign person to manufacture a defense article under US licence - typically for local production under an FMS programme or commercial arrangement.

### Key Differences from TAA
| Feature | TAA | MLA |
|---------|-----|-----|
| What is transferred | Technical data / services | Manufacturing rights + technical data |
| Foreign party produces? | No | Yes |
| Sub-licensing allowed? | Conditional | Usually yes, with restrictions |
| Offset programs | Not typical | Common |

### Required MLA Clauses
- Licence to manufacture (specific quantities, articles, versions)
- Quality assurance provisions
- US government rights (inspection, audit, terminate)
- Retransfer and re-export controls
- Royalty / fee structure
- End-of-programme disposition of tooling and data

---

## ITAR Exemptions (Selected)

Certain transfers do not require a licence if all conditions are met. **Exemptions are NOT blanket authorisations - verify conditions every time.**

### Key Exemptions (22 CFR Part 123–126)

| Exemption | CFR Reference | Conditions |
|-----------|--------------|-----------|
| US government | § 126.4 | Export by/for US Dept of Defense, State, etc. with government orders |
| Canada exemption | § 126.5 | Certain unclassified hardware to Canada only; does not apply to all categories |
| Australian/UK exemption | § 126.7 | Limited scope for certain Gov-to-Gov and industry-to-industry transfers; requires eligibility verification |
| Intra-company | § 125.4(b)(9) | Technical data to wholly owned US subsidiary abroad; limited scope |
| Beta test software | § 125.4(b)(10) | Unclassified software for beta testing by foreign person; narrow conditions |
| Beta hardware | § 123.16 | Temporary export of unclassified hardware for demonstration; strict limits |

**Australia, UK, Canada Defence Trade Cooperation Treaties**: Provide streamlined licensing for covered defence articles between treaty partners; not a blanket exemption.

---

## Foreign Military Sales (FMS) vs Direct Commercial Sales (DCS)

| Aspect | FMS | DCS |
|--------|-----|-----|
| Contract party | US Government (DSCA) | US company directly |
| ITAR licence | Not required (US Gov exemption) | DSP-5 / TAA required |
| End-use assurance | US Government provides | US company responsible |
| Price | Government + administrative fees | Market rate |
| Delivery risk | US Government manages | US company manages |

---

## Record-Keeping Requirements (22 CFR § 122.5)

All ITAR registrants must maintain for **5 years**:
- All export/import licences and shipping documents
- All TAA/MLA agreements and associated records
- End-user certificates and purchase orders
- Records of all disclosures of technical data
- Commodity Jurisdiction requests and determinations
- Voluntary disclosure records

Records must be available for inspection by DDTC, US Customs, DoD, or other US government agencies.
reverse-engineer-anythingmorluto/reaReverse engineer native, managed, Electron/JavaScript, packaged, firmware, and browser targets with REA, and build agent environments (AgentEnv bundles) of web applications from a live instance or a capture, and of Linux desktop apps with a task from a request. Use shipped-artifact or requested runtime evidence to explain features, compare versions, decompile code, or guide a reconstruction. Skip REA for ordinary source-repository architecture analysis.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
diagnosing-superpowersobra/superpowersUse when a superpowers session went wrong and your human partner wants to know why — repeated work, ignored plans, stumbles, poor results, a skill that didn't fire, "it took too long", "why is it so expensive", "what is it doing" — or wants to build a bug report for the superpowers maintainers, for the current session or a past one identified by id or path, on any harness.Stars: 323kUpdated Claude CodeCodexVerifiedInstall
dispatching-parallel-agentsobra/superpowersUse when facing 2+ independent tasks that can be worked on without shared state or sequential dependenciesStars: 323kUpdated Claude CodeCodexVerifiedInstall
executing-plansobra/superpowersUse when executing an implementation plan in the current session as the implementer yourself — your human partner chose inline execution, or no subagent tool is availableStars: 323kUpdated Claude CodeCodexVerifiedInstall