Skip to content

matlab/matlab-agentic-toolkit / skills-catalog/test-and-measurement/matlab-use-vehicle-network

matlab-use-vehicle-network

Unverified

Use when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors. (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).

FileKindSize
SKILL.mdskill md13.1 KB
manifest.yamlconfig537 B
references/can/bus-speed-config.mdmarkdown2.2 KB
references/can/channel-creation.mdmarkdown1.5 KB
references/can/database.mdmarkdown3.0 KB
references/can/filters.mdmarkdown2.8 KB
references/can/message-creation.mdmarkdown1.3 KB
references/can/message-extraction.mdmarkdown3.8 KB
references/can/pack-unpack.mdmarkdown2.6 KB
references/can/receive.mdmarkdown1.9 KB
references/can/transmit.mdmarkdown2.3 KB
references/can/troubleshooting/bus-length-guidelines.mdmarkdown3.5 KB
references/can/troubleshooting/diagnostic-workflow.mdmarkdown21.4 KB
references/can/troubleshooting/l1-branches.mdmarkdown11.1 KB
references/can/troubleshooting/l1-domain-knowledge.mdmarkdown6.8 KB
references/can/troubleshooting/l1-failure-scenarios.mdmarkdown3.6 KB
references/can/troubleshooting/l2-analysis-pipeline.mdmarkdown4.5 KB
references/can/troubleshooting/l2-interpretation-tables.mdmarkdown1.8 KB
references/can/troubleshooting/script-interfaces.mdmarkdown2.6 KB
references/shared/channel-lifecycle.mdmarkdown1.1 KB
references/shared/hardware-discovery.mdmarkdown1.1 KB
references/shared/limitations.mdmarkdown1.7 KB
scripts/can/troubleshooting/canBaudRateScanActive.pbinary1.0 KB
scripts/can/troubleshooting/canBaudRateScanPassive.pbinary1.0 KB
scripts/can/troubleshooting/canBurstDetection.pbinary488 B
scripts/can/troubleshooting/canBusLoadCalc.pbinary787 B
scripts/can/troubleshooting/canChannelHealthCheck.pbinary902 B
scripts/can/troubleshooting/canCycleTimeAnalysis.pbinary558 B
scripts/can/troubleshooting/canDiagnosticProbe.pbinary335 B
scripts/can/troubleshooting/canHardwareDiscovery.pbinary290 B
scripts/can/troubleshooting/canLoopbackSelfTest.pbinary628 B
scripts/can/troubleshooting/canSupportSummary.pbinary1.4 KB
scripts/can/troubleshooting/canTrafficOverview.pbinary900 B

references/can/troubleshooting/script-interfaces.md

View on GitHub
# Script Interfaces

Function signatures and output contracts for all diagnostic scripts. The agent calls these via `mcp__matlab__evaluate_matlab_code` — never read source.

---

## Phase 0: Automation Scripts

| Function | Arguments | Output (command window) | Side Effects |
|----------|-----------|------------------------|--------------|
| `canHardwareDiscovery()` | none | Available channels table or `NO_PHYSICAL_HARDWARE` | None |
| `canSupportSummary()` | none | Driver/plugin status summary | Creates `cansupport.txt` |
| `canChannelHealthCheck(vendor, device, chIndex, useFD)` | vendor (string), device (string), chIndex (double), useFD (logical) | Health snapshot: BusStatus, TEC, REC, traffic sample | Starts/stops channel |
| `canLoopbackSelfTest()` | none | `PASS` or `FAIL` with received messages | Creates/destroys virtual channels |
| `canBaudRateScanPassive(vendor, device, chIndex)` | vendor (string), device (string), chIndex (double) | Detected baud or `NO_TRAFFIC_AT_ANY_RATE` | Starts/stops channels at each rate |
| `canBaudRateScanActive(vendor, device, chIndex)` | vendor (string), device (string), chIndex (double) | `ACK RECEIVED` or `No ACK` per rate | Transmits test frames |
| `canDiagnosticProbe(canCh)` | canCh (started channel object) | TEC/REC/BusStatus after probe | Transmits 1 frame, may toggle SilentMode |

## Phase 2: L2 Analysis Scripts

| Function | Arguments | Output (command window) | Side Effects |
|----------|-----------|------------------------|--------------|
| `canTrafficOverview(rawMsgs)` | rawMsgs (timetable) | Per-ID breakdown, dropout detection, node presence | None |
| `canCycleTimeAnalysis(rawMsgs)` | rawMsgs (timetable) | Jitter stats per ID (mean, std, jitter%, timeouts) | None |
| `canBusLoadCalc(rawMsgs, busSpeedBps)` | rawMsgs (timetable), busSpeedBps (double, default 500000) | Bus load %, arbitration starvation warning | None |
| `canBurstDetection(rawMsgs, busSpeedBps)` | rawMsgs (timetable), busSpeedBps (double, default 500000) | Temporal burst profile (1s windows) | None |

## Invocation Pattern

```matlab
% Phase 0 — no prior state needed
canHardwareDiscovery()
canChannelHealthCheck("Vector", "VN1610 1", 1, false)

% Phase 2 — requires rawMsgs captured earlier
rawMsgs = receive(canCh, Inf, "OutputFormat", "timetable");
canTrafficOverview(rawMsgs)
canBusLoadCalc(rawMsgs, 500000)
```

All functions print to the command window. The agent uses `mcp__matlab__evaluate_matlab_code` with `project_path` set to the skill's `scripts/can/troubleshooting/` directory so MATLAB can find the functions on path.

----

Copyright 2026 The MathWorks, Inc.

----
slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack."Stars: 197kUpdated Claude CodeCodexVerifiedInstall
ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt.Stars: 194kUpdated Claude CodeCodexVerifiedInstall