Skip to content

matlab/matlab-agentic-toolkit / skills-catalog/test-and-measurement/matlab-use-vehicle-network

matlab-use-vehicle-network

Unverified

Use when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors. (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).

FileKindSize
SKILL.mdskill md13.1 KB
manifest.yamlconfig537 B
references/can/bus-speed-config.mdmarkdown2.2 KB
references/can/channel-creation.mdmarkdown1.5 KB
references/can/database.mdmarkdown3.0 KB
references/can/filters.mdmarkdown2.8 KB
references/can/message-creation.mdmarkdown1.3 KB
references/can/message-extraction.mdmarkdown3.8 KB
references/can/pack-unpack.mdmarkdown2.6 KB
references/can/receive.mdmarkdown1.9 KB
references/can/transmit.mdmarkdown2.3 KB
references/can/troubleshooting/bus-length-guidelines.mdmarkdown3.5 KB
references/can/troubleshooting/diagnostic-workflow.mdmarkdown21.4 KB
references/can/troubleshooting/l1-branches.mdmarkdown11.1 KB
references/can/troubleshooting/l1-domain-knowledge.mdmarkdown6.8 KB
references/can/troubleshooting/l1-failure-scenarios.mdmarkdown3.6 KB
references/can/troubleshooting/l2-analysis-pipeline.mdmarkdown4.5 KB
references/can/troubleshooting/l2-interpretation-tables.mdmarkdown1.8 KB
references/can/troubleshooting/script-interfaces.mdmarkdown2.6 KB
references/shared/channel-lifecycle.mdmarkdown1.1 KB
references/shared/hardware-discovery.mdmarkdown1.1 KB
references/shared/limitations.mdmarkdown1.7 KB
scripts/can/troubleshooting/canBaudRateScanActive.pbinary1.0 KB
scripts/can/troubleshooting/canBaudRateScanPassive.pbinary1.0 KB
scripts/can/troubleshooting/canBurstDetection.pbinary488 B
scripts/can/troubleshooting/canBusLoadCalc.pbinary787 B
scripts/can/troubleshooting/canChannelHealthCheck.pbinary902 B
scripts/can/troubleshooting/canCycleTimeAnalysis.pbinary558 B
scripts/can/troubleshooting/canDiagnosticProbe.pbinary335 B
scripts/can/troubleshooting/canHardwareDiscovery.pbinary290 B
scripts/can/troubleshooting/canLoopbackSelfTest.pbinary628 B
scripts/can/troubleshooting/canSupportSummary.pbinary1.4 KB
scripts/can/troubleshooting/canTrafficOverview.pbinary900 B

references/can/troubleshooting/l2-interpretation-tables.md

View on GitHub
# L2 Interpretation Tables

Thresholds and assessment criteria for interpreting L2 analysis script output.

---

## Cycle Time / Jitter Assessment

**Before flagging high jitter**, determine: is this message periodic or event-driven? Event-driven messages (transmit on change only) naturally have high jitter — that's expected, not a fault.

**Virtual channel note:** If data was captured on MathWorks Virtual channels, baseline jitter of 8-10% is normal OS scheduling overhead. Only flag jitter >15% as concerning for Virtual channels. Software-timed transmitters (MATLAB pause loops) can produce even higher jitter — this is a transmitter limitation, not a bus problem.

### Jitter Thresholds (Periodic Messages Only)

| Jitter | Assessment |
|--------|-----------|
| <10% | Healthy |
| 10-20% | Moderate — acceptable under load |
| >20% | Problem — overload, scheduling, or starvation |

### Cycle Time Symptoms

| Symptom | Meaning |
|---------|---------|
| Timeouts (>3x mean) | Source went offline or severe arbitration loss |
| Mean ~2x expected | Transmitter at half rate (task/scheduling issue) |
| Gradually drifting | Clock source issue on transmitter |

---

## Bus Load Assessment

**Note:** Module 3 uses classic CAN frame overhead. For CAN FD, the result is an approximation — still directionally useful for health assessment.

| Bus Load | Assessment |
|----------|-----------|
| <30% | Light |
| 30-50% | Normal |
| 50-70% | Heavy — low-priority jitter expected |
| 70-85% | Critical — starvation likely |
| >85% | Overloaded — bus segmentation needed |

---

## Arbitration Starvation Criteria

Starvation is detected when:
- Low-priority ID jitter > 3x high-priority ID jitter
- AND low-priority jitter > 20%

This means low-priority messages are consistently losing arbitration and being delayed.

----

Copyright 2026 The MathWorks, Inc.

----
slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack."Stars: 198kUpdated Claude CodeCodexVerifiedInstall
ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report.Stars: 194kUpdated Claude CodeCodexVerifiedInstall
ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt.Stars: 194kUpdated Claude CodeCodexVerifiedInstall