matlab/matlab-agentic-toolkit / skills-catalog/test-and-measurement/matlab-use-vehicle-network
matlab-use-vehicle-network
UnverifiedUse when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors. (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).
references/can/pack-unpack.md
View on GitHub# Pack / Unpack
## pack — Encode a signal value into message data bytes
```matlab
pack(msg, value, startBit, signalLength, byteOrder);
```
- `msg` — `canMessage` or `canFDMessage` object
- `value` — numeric value to encode (cast determines signedness: `int16`, `uint8`, etc.)
- `startBit` — 0-based bit position where signal starts
- `signalLength` — number of bits the signal occupies
- `byteOrder` — `'LittleEndian'` or `'BigEndian'`
**Writes directly to `msg.Data`** — triggers `transmitEvent` if enabled.
## unpack — Decode a signal value from message data bytes
```matlab
value = unpack(msg, startBit, signalLength, byteOrder, dataType);
```
- `dataType` — output type string: `'int8'`, `'uint16'`, `'single'`, `'double'`, etc.
- Returns the decoded numeric value
## Key Behaviors
- `pack`/`unpack` work on **message objects**, not timetables
- For received timetables: extract the message first, then unpack:
```matlab
msgs = receive(ch, Inf, 'OutputFormat', 'timetable');
rawData = msgs.Data{1}; % uint8 array
value = typecast(rawData(1:2), 'int16'); % manual decode
```
- Byte order must match the DBC/signal specification exactly
- The `value` type in `pack` determines sign extension: use `int16(-500)` for signed signals
- For CAN FD messages with DLC > 8, bit positions extend beyond 63
## pack vs Database Signals
| Approach | When to Use |
|----------|-------------|
| `pack`/`unpack` | No DBC available, or working with raw proprietary protocols |
| `msg.Signals.Name = value` | DBC attached — handles factor, offset, byte order automatically |
Database signals are higher-level: `msg.Signals.EngineSpeed = 3000` internally calls the equivalent of `pack` with the correct parameters from the DBC definition.
## Typical Patterns
**Manual encode/decode (no database):**
```matlab
msg = canMessage(0x180, false, 8);
pack(msg, int16(3000), 0, 16, 'LittleEndian'); % speed at bits 0-15
pack(msg, uint8(85), 16, 8, 'LittleEndian'); % temp at bits 16-23
transmit(ch, msg);
% On receive side:
rxMsg = receive(ch, 1);
speed = unpack(rxMsg, 0, 16, 'LittleEndian', 'int16');
temp = unpack(rxMsg, 16, 8, 'LittleEndian', 'uint8');
```
**CAN FD with large payload:**
```matlab
msg = canFDMessage(0x300, false, 64);
pack(msg, single(3.14), 0, 32, 'LittleEndian'); % float at bits 0-31
pack(msg, uint32(12345), 32, 32, 'LittleEndian'); % counter at bits 32-63
```
**Event-triggered transmit with pack:**
```matlab
msg = canMessage(0x200, false, 8);
transmitEvent(ch, msg, 'On');
start(ch);
% Each pack writes .Data, triggering auto-transmit
pack(msg, int16(value), 0, 16, 'LittleEndian');
```
----
Copyright 2026 The MathWorks, Inc.
----
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack." | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |