matlab/matlab-agentic-toolkit / skills-catalog/wireless-communications/matlab-generate-wlan-waveform
matlab-generate-wlan-waveform
VerifiedGenerate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 20.9 KB |
| manifest.yaml | config | 431 B |
| references/documentation-links.md | markdown | 2.2 KB |
| references/eht-allocation-indices.md | markdown | 9.1 KB |
| references/he-allocation-indices.md | markdown | 4.5 KB |
| references/mac-frame-properties.md | markdown | 5.2 KB |
| references/multi-packet-waveforms.md | markdown | 2.5 KB |
| references/trigger-based-uplink.md | markdown | 2.9 KB |
| references/uhr-waveform-generation.md | markdown | 5.7 KB |
references/multi-packet-waveforms.md
View on GitHub# Multi-Packet Waveforms
## A-MPDU Aggregation
For realistic VHT/HE/EHT packets, use A-MPDU with `wlanMSDULengths`:
```matlab
cfgMAC = wlanMACFrameConfig('FrameType', 'QoS Data', 'FrameFormat', 'VHT');
cfgMAC.MSDUAggregation = 1;
msduLengths = wlanMSDULengths(cfg.APEPLength, cfgMAC, cfg);
msdu = cell(1, numel(msduLengths));
for k = 1:numel(msduLengths)
msdu{k} = randi([0 255], 1, msduLengths(k), 'uint8');
end
[psdu, apepLen] = wlanMACFrame(msdu, cfgMAC, cfg, 'OutputFormat', 'bits');
cfg.APEPLength = apepLen; % Feed APEP length back to PHY config
```
**Key points:**
- Payload is a cell array of uint8 vectors (not hex strings)
- Second output of `wlanMACFrame` is the actual APEP length — feed it back to the
PHY config before waveform generation
- `wlanMSDULengths` computes how many MSDUs fit a given APEP length
- For EHT/UHR compatibility notes, see
[mac-frame-properties.md](mac-frame-properties.md)
## Identical Packets
```matlab
waveform = wlanWaveformGenerator(bits, cfg, 'NumPackets', 3, 'IdleTime', 20e-6);
```
## Mixed-Format Sequences (e.g., Data-ACK)
Generate each packet separately and concatenate with inter-frame gaps:
```matlab
fs = wlanSampleRate(cfgData);
sifsSamples = round(16e-6 * fs); % SIFS: response frames (ACK, CTS, BA)
difsSamples = round(34e-6 * fs); % DIFS: new channel access after exchange
pifsSamples = round(25e-6 * fs); % PIFS: priority access
% Zero-pad narrower waveforms to match widest antenna count
numAnt = max(size(wvData,2), size(wvACK,2));
wvACKPad = [wvACK, zeros(size(wvACK,1), numAnt - size(wvACK,2))];
% Data->ACK->Data->ACK exchange
waveform = [wvData1; zeros(sifsSamples, numAnt); wvACKPad; ...
zeros(difsSamples, numAnt); wvData2; zeros(sifsSamples, numAnt); wvACKPad];
```
## Inter-Frame Spacing
| Spacing | Duration | When to use |
|---------|----------|-------------|
| SIFS | 16 us | Immediate responses: ACK, CTS, Block Ack, next in burst |
| DIFS | 34 us | New channel access after an exchange completes |
| PIFS | 25 us | Priority access (polling, beamforming) |
## Oversampling for Mixed-Format Concatenation
When concatenating waveforms of different bandwidths (e.g., Non-HT 20 MHz + EHT
80 MHz), oversample the narrower waveform to match the wider sample rate:
```matlab
fsEHT = wlanSampleRate(cfgEHT); % 80 MHz
fsNonHT = wlanSampleRate(cfgNonHT); % 20 MHz
osf = fsEHT / fsNonHT; % 4x
wvNonHT = wlanWaveformGenerator(bitsNonHT, cfgNonHT, 'OversamplingFactor', osf);
```
----
Copyright 2026 The MathWorks, Inc.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 321k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 321k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 321k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |