matlab/matlab-agentic-toolkit / skills-catalog/wireless-communications/matlab-generate-gnss-waveform
matlab-generate-gnss-waveform
VerifiedGenerate GNSS baseband waveforms (GPS, Galileo, NavIC) with physically realistic or user-specified channel impairments using the Satellite Communications Toolbox. Use when generating GPS L1 C/A, L1C, L2C, L5, Galileo E1, E1C, E5a, E5b, E5, or NavIC L5, S, L1 signals. Covers gpsWaveformGenerator, galileoWaveformGenerator, satelliteScenario, Doppler/delay from orbital dynamics or custom values, navigation data encoding with ephemeris, and RINEX integration. Triggers on: GPS waveform, Galileo waveform, NavIC waveform, GNSS signal, satellite scenario, GNSS simulation, receiver test signal, baseband GNSS, L-band satellite signal, navigation signal generation.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 20.0 KB |
| manifest.yaml | config | 573 B |
| references/galileo-pipeline.md | markdown | 10.4 KB |
| references/gps-pipeline.md | markdown | 5.2 KB |
| references/helper-files.md | markdown | 2.9 KB |
| references/navic-pipeline.md | markdown | 10.8 KB |
| references/physical-constraints.md | markdown | 4.4 KB |
| references/rinex-integration.md | markdown | 5.2 KB |
| references/signal-type-mapping.md | markdown | 2.4 KB |
references/physical-constraints.md
View on GitHub# Physical Constraint Verification
Verify that channel parameters come from a real satellite scenario, not
hand-rolled constants. Run these checks after Step 3 of the workflow.
## Expected Ranges
### MEO Constellations (GPS, Galileo)
| Parameter | Range | Source |
|-----------|-------|--------|
| Visible satellites | 4-18 (GPS typically 6-12, Galileo up to 18) | Constellation geometry |
| Doppler (L1/E1) | ±10 kHz | Orbital velocity ~3.87 km/s |
| Doppler (L2) | ±8 kHz | Lower carrier frequency |
| Doppler (L5/E5a) | ±7.5 kHz | Lowest carrier frequency |
| Propagation delay | 67-86 ms | MEO orbit ~20,200 km altitude |
| SNR per satellite | -15 to -5 dB (typical) | Free-space path loss |
### GEO/GSO Constellation (NavIC)
| Parameter | Range | Source |
|-----------|-------|--------|
| Visible satellites | 4-7 | Regional constellation (India-centric) |
| Doppler (L5) | ±500 Hz (GEO), ±2 kHz (GSO) | Near-stationary GEO, inclined GSO |
| Propagation delay | 119-130 ms | GEO orbit ~35,786 km altitude |
| SNR per satellite | -15 to -5 dB (typical) | Free-space path loss |
## Full Verification Code
```matlab
function verifyScenarioChannelParams(dopShifts, ltncy, satIndices, centerFrequency, options)
%verifyScenarioChannelParams Check that channel params are physically realistic.
% Fails with descriptive error if any parameter is outside expected range.
% Supports GPS/Galileo (MEO) and NavIC (GEO/GSO) constellations.
arguments
dopShifts (:,:) double
ltncy (:,:) double
satIndices (1,:) double {mustBePositive, mustBeInteger}
centerFrequency (1,1) double {mustBePositive}
options.Constellation (1,1) string ...
{mustBeMember(options.Constellation, ["GPS", "Galileo", "NavIC"])} = "GPS"
end
dopVisible = dopShifts(:, satIndices);
delayVisible = ltncy(:, satIndices);
numVisible = length(satIndices);
% Set constellation-specific ranges
switch options.Constellation
case {"GPS", "Galileo"}
minSats = 4;
maxSats = 14;
minDelay = 0.060; % 60 ms
maxDelay = 0.095; % 95 ms
maxVelocity = 3870; % m/s (MEO orbital velocity)
case "NavIC"
minSats = 4;
maxSats = 7;
minDelay = 0.115; % 115 ms
maxDelay = 0.130; % 130 ms
maxVelocity = 3100; % m/s (GSO orbital velocity, GEO is near-zero)
end
% 1. Visible satellite count
assert(numVisible >= minSats && numVisible <= maxSats, ...
"Expected %d-%d visible satellites, got %d", minSats, maxSats, numVisible);
% 2. Doppler within physical limits
maxDoppler = maxVelocity * centerFrequency / physconst("LightSpeed") * 1.3;
assert(all(abs(dopVisible(:)) < maxDoppler), ...
"Doppler %.1f Hz exceeds physical limit %.1f Hz", ...
max(abs(dopVisible(:))), maxDoppler);
% 3. Propagation delay in orbit range
assert(all(delayVisible(:) > minDelay & delayVisible(:) < maxDelay), ...
"Delay outside %s orbit range [%.0f-%.0f ms]", ...
options.Constellation, minDelay*1000, maxDelay*1000);
% 4. Each satellite has distinct Doppler
uniqueDop = length(unique(round(dopVisible(1,:))));
assert(uniqueDop == numVisible, ...
"Expected %d unique Doppler values, got %d", numVisible, uniqueDop);
% 5. Doppler varies over time
if size(dopVisible, 1) > 1
dopChange = dopVisible(end,:) - dopVisible(1,:);
assert(any(abs(dopChange) > 0.001), ...
"Doppler should change over time (orbital dynamics)");
end
fprintf("All physical constraint checks passed (%d %s satellites).\n", ...
numVisible, options.Constellation);
end
```
## Quick Inline Check
For a fast check without the full function:
```matlab
dopVisible = dopShifts(:, satIndices);
delayVisible = ltncy(:, satIndices);
% 1. Visible satellite count
assert(length(satIndices) >= 4 && length(satIndices) <= 14);
% 2. Doppler within physical limits (±10 kHz for L1, scale for other bands)
assert(all(abs(dopVisible(:)) < 10000));
% 3. Propagation delay (GPS/Galileo: 67-86 ms, NavIC: 119-130 ms)
assert(all(delayVisible(:) > 0.060 & delayVisible(:) < 0.130));
% 4. Each satellite has distinct Doppler
assert(length(unique(round(dopVisible(1,:)))) == length(satIndices));
% 5. Doppler varies over time
assert(any(abs(dopVisible(end,:) - dopVisible(1,:)) > 0.01));
```
Copyright 2026 The MathWorks, Inc.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |