matlab/matlab-agentic-toolkit / skills-catalog/wireless-communications/matlab-generate-ble-waveform
matlab-generate-ble-waveform
VerifiedGenerate Bluetooth Low Energy (BLE) PHY waveforms. Read BEFORE writing any BLE waveform code to avoid hallucinating API patterns. Covers bleWaveformGenerator, bleIdealReceiver, bleCTEIQSample, bleAngleEstimate, bluetoothTestWaveform for LE1M/LE2M/LE500K/LE125K. Bluetooth Toolbox R2022a+.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 17.9 KB |
| manifest.yaml | config | 432 B |
| references/cte-direction-finding.md | markdown | 1.6 KB |
| references/data-whitening.md | markdown | 1.2 KB |
| references/direction-finding.md | markdown | 3.3 KB |
| references/functionalAPI.md | markdown | 17.6 KB |
| references/phy-modes-and-timing.md | markdown | 2.9 KB |
| references/practical-receiver-simulation.md | markdown | 13.4 KB |
| references/rfphy-compliance-testing.md | markdown | 1.7 KB |
| references/rssi-localization.md | markdown | 1.5 KB |
| references/transmitter-measurements.md | markdown | 1.2 KB |
| references/wlan-coexistence.md | markdown | 1.3 KB |
references/wlan-coexistence.md
View on GitHub# WLAN Coexistence Reference
## Overview
BLE operates in the 2.4 GHz ISM band alongside WLAN (Wi-Fi). Coexistence
testing evaluates BLE receiver performance under WLAN interference.
## BLE Channel Frequencies
| Channel Type | Indices | Frequencies |
|-------------|---------|------------|
| Advertising | 37 | 2.402 GHz |
| Advertising | 38 | 2.426 GHz |
| Advertising | 39 | 2.480 GHz |
| Data | 0-36 | 2.404-2.478 GHz (2 MHz spacing) |
## WLAN Channel Overlap
- WLAN Ch 1: 2.412 GHz (20 MHz BW) -- overlaps BLE data channels 4-14
- WLAN Ch 6: 2.437 GHz (20 MHz BW) -- overlaps BLE data channels 8-25
- WLAN Ch 11: 2.462 GHz (20 MHz BW) -- overlaps BLE data channels 21-34
- BLE advertising channels are placed to minimize WLAN overlap
## Coexistence Test Approach
1. Generate BLE waveform using `bleWaveformGenerator`
2. Create WLAN-like interferer (bandpass noise at offset frequency)
3. Combine signals at desired Carrier-to-Interference (C/I) ratio
4. Decode combined signal with `bleIdealReceiver`
5. Measure BER degradation vs. C/I ratio
## Typical C/I Requirements (BLE Spec)
| Scenario | Required C/I |
|----------|--------------|
| Co-channel (0 MHz offset) | >= 21 dB |
| Adjacent (1 MHz offset) | >= -17 dB |
| Adjacent (2 MHz offset) | >= -27 dB |
| Non-adjacent (>= 3 MHz) | >= -27 dB |
----
Copyright 2026 The MathWorks, Inc.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| receiving-code-reviewobra/superpowersUse when receiving code review feedback, before implementing suggestions, especially if feedback seems unclear or technically questionable - requires technical rigor and verification, not performative agreement or blind implementation | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| requesting-code-reviewobra/superpowersUse when completing tasks, implementing major features, or before merging to verify work meets requirements | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| using-git-worktreesobra/superpowersUse when starting feature work that needs isolation from current workspace or before executing implementation plans - ensures an isolated workspace exists via native tools or git worktree fallback | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| verification-before-completionobra/superpowersUse when about to claim work is complete, fixed, or passing, before committing or creating PRs - requires running verification commands and confirming output before making any success claims; evidence before assertions always | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |