matlab/matlab-agentic-toolkit / skills-catalog/radar/matlab-design-radar-waveform
matlab-design-radar-waveform
VerifiedDesign, select, and analyze waveforms for radar, sonar, and active sensing using the Phased Array System Toolbox. Covers LFM, NLFM, FMCW, phase-coded, CW, stepped FM, custom IQ, ambiguity functions, sidelobe reduction, and Doppler tolerance. Key objects: phased.LinearFMWaveform, phased.NonlinearFMWaveform, phased.CustomFMWaveform, phased.PhaseCodedWaveform, phased.FMCWWaveform, phased.SteppedFMWaveform, phased.MFSKWaveform, phased.RectangularWaveform, nlfmspec2freq, shapespectrum, ambgfun, pambgfun, sidelobelevel, legendreseq, mlseq, radarWaveformGenerator.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 25.4 KB |
| manifest.yaml | config | 523 B |
| references/analysis-functions.md | markdown | 4.5 KB |
| references/common-mistakes.md | markdown | 4.3 KB |
| references/phase-code-reference.md | markdown | 4.2 KB |
| references/spectral-notching.md | markdown | 8.9 KB |
| references/waveform-objects.md | markdown | 11.0 KB |
references/phase-code-reference.md
View on GitHub# Phase Code Reference
## Available Codes in phased.PhaseCodedWaveform
### Binary Codes
| Code | NumChips Constraint | Notes |
|------|-------------------|-------|
| `'Barker'` | {2, 3, 4, 5, 7, 11, 13} only | PSL = -22.3 dB (length 13). Limited lengths. |
| `'Maximum Length Sequence'` | {7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191} | Good aperiodic properties. Use `mlseq` for standalone generation. |
| `'Quadratic Residue Sequence'` | Must be prime of form 4n-1 | Binary, good periodic autocorrelation. |
### Polyphase Codes
| Code | NumChips Constraint | Notes |
|------|-------------------|-------|
| `'Frank'` | Must be perfect square | Derived from stepped frequency. |
| `'P1'` | Must be perfect square | Similar to Frank, different phase mapping. |
| `'P2'` | Must be even AND perfect square | Symmetric variant of P1. |
| `'P3'` | No constraint | Derived from linear FM. |
| `'P4'` | No constraint | Derived from linear FM (alternate). |
| `'Px'` | Must be perfect square | Extended polyphase code. |
| `'Zadoff-Chu'` | SequenceIndex must be relatively prime to NumChips | Constant amplitude, zero autocorrelation. Widely used in LTE/5G. |
### Custom Code
| Code | Constraint | Notes |
|------|-----------|-------|
| `'Custom'` | Any complex-valued vector via `CustomCode` property | General-purpose container. Accepts IQ, not just phase. |
## Code Selection Guidance
| Requirement | Recommended Code | Typical PSL |
|-------------|-----------------|-------------|
| Deep PSL (< -30 dB) at moderate length | `pnkcode(N, 2, 1)` — P(2,1) polyphase | -35 dB at N=400 |
| Binary only (hardware constraint) | Maximum Length Sequence or Barker | ~-10·log10(N) |
| Low periodic autocorrelation sidelobes | Legendre (`legendreseq`) via Custom | ~-20 dB |
| Constant amplitude + zero periodic AC | Zadoff-Chu | depends on N |
| Maximum flexibility | Custom with `pnkcode`, `legendreseq`, `mlseq`, or `apaseq` | varies |
| Doppler tolerant | Avoid phase-coded — use LFM instead | N/A |
| Short code, moderate sidelobes | Barker (up to length 13) | -22.3 dB |
**Key insight:** For PSL targets below -25 dB, `pnkcode` (polyphase P(n,k)
codes) is the primary choice. Legendre sequences achieve only ~-20 dB at
practical lengths. Binary codes (MLS, Barker) follow PSL ≈ -10·log10(N) — to
reach -35 dB requires N≈3162, which is impractically long.
## Sequence Generation Functions (R2024a)
These functions generate sequences for use with `Code='Custom'`:
| Function | Output | Best For |
|----------|--------|----------|
| `legendreseq(N)` | Length-N Legendre sequence (N must be odd prime) | Perfect periodic autocorrelation |
| `mlseq(N)` | Length-N maximum-length sequence (N must be 2^n - 1, e.g., 7, 15, 31, 63, 127, ...) | Good aperiodic autocorrelation |
| `apaseq(N)` | Length-N almost-perfect autocorrelation sequence (N must be 2*(p+1) where p is prime) | Near-perfect periodic autocorrelation |
| `pnkcode(N, n, k)` | Polyphase P(n,k) code of length N; n = exponent, k = amplitude parameter | Flexible polyphase design |
Example:
```matlab
% CW waveform with Legendre sequence for low sidelobes
seq = legendreseq(127); % prime length
chipWidth = 1e-6;
prf = 1/(numel(seq) * chipWidth); % 100% duty cycle
wav = phased.PhaseCodedWaveform( ...
'Code', 'Custom', ...
'CustomCode', seq, ...
'ChipWidth', chipWidth, ...
'PRF', prf, ...
'SampleRate', 10e6);
```
## Doppler Sensitivity
Phase-coded waveforms are generally NOT Doppler tolerant. Doppler shift corrupts
the code correlation and raises sidelobes. Longer codes are more sensitive.
**Binary codes are worst:** Doppler tolerance degrades catastrophically with code
length. A length-255 MLS can lose 8+ dB at moderate Doppler shifts. Polyphase
codes (P3, P4, Frank, P(n,k)) degrade more gracefully.
If the application requires both range resolution and Doppler tolerance, prefer
LFM or NLFM waveforms over phase-coded.
## Constraints
- `SampleRate * ChipWidth` must be an integer — each chip must contain a whole
number of samples. When deriving ChipWidth from bandwidth, fix rounding:
`chipWidth = round(fs * chipWidth) / fs`
- `SampleRate / PRF` must be an integer (same as all pulsed waveforms)
----
Copyright 2026 The MathWorks, Inc.
----
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| brainstormingobra/superpowersYou MUST use this before any creative work - creating features, building components, adding functionality, modifying behavior, or planning anything new, in software or out of it (a talk, a business, a renovation). | Stars: 321k | Updated | Claude CodeCodex | Verified | Install |
| brand-guidelinesanthropics/skillsApplies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply. | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |
| frontend-designanthropics/skillsGuidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults. | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |
| mcp-builderanthropics/skillsGuide for creating high-quality MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. Use when building MCP servers to integrate external APIs or services, whether in Python (FastMCP) or Node/TypeScript (MCP SDK). | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |