matlab/matlab-agentic-toolkit / skills-catalog/rf-and-mixed-signal/matlab-design-pcb-passive
matlab-design-pcb-passive
VerifiedSpiral inductors, interdigital capacitors, baluns, resonators, phase shifters for impedance matching, DC blocking, and bias tees. TRIGGER: user asks to design or create a spiral inductor, interdigital capacitor, balun, resonator, phase shifter, or other passive RF component. Invoke BEFORE writing code — class names and property patterns are non-obvious. SKIP: filter design (use matlab-design-pcb-filter), coupler/splitter design (use matlab-design-pcb-coupler), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), material setup only (use matlab-manage-pcb-material).
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 13.4 KB |
| manifest.yaml | config | 480 B |
| references/resonators-detail.md | markdown | 3.5 KB |
references/resonators-detail.md
View on GitHub# Resonators, Baluns & Phase Shifters — Detailed Reference
## splitRing Shape Primitive
`splitRing` is a shape object (not a standalone EM component). Attach it to `resonatorSplitRingCustom` via the `Resonator` property, or embed it in a custom `pcbComponent`.
```matlab
s = splitRing; % Default: Circle, 2 rings
s = splitRing(Type="Hexagon", NumRings=3);
s = splitRing(Type="Triangle", NumRings=4, SplitSide=[1 2 3 1]);
s = splitRing(Type="Square");
```
**Available types:** `'Circle'`, `'Square'`, `'Hexagon'`, `'Triangle'`
| Property | Description |
|----------|-------------|
| `Type` | Shape type |
| `NumRings` | Number of concentric rings |
| `RingDiameterInner` / `SideLengthInner` | Inner ring size (circular / polygonal) |
| `RingDiameterOuter` / `SideLengthOuter` | Outer ring size |
| `TraceWidth` | Ring trace width |
| `SplitGap` | Gap width in each ring |
| `SplitAngle` | Angle of split for each ring (vector) — circular types only |
| `SplitSide` | Side index for polygonal splits (vector) — polygonal types only |
| `ReferencePoint` | XY placement offset |
### SplitAngle vs SplitSide
For circular split rings, use `SplitAngle` (degrees). For polygonal types (Square, Hexagon, Triangle), use `SplitSide` (integer side index). Setting the wrong property for the shape type will be ignored.
### Polygonal SplitSide Defaults
When creating a `splitRing` with `Type="Hexagon"` and `NumRings>2`, the default `SplitSide=[1 1]` is often invalid — hexagons require `SplitSide` values from {2, 3, 5, 6}. Always set `SplitSide` explicitly when using polygonal types with multiple rings.
## Complementary Split-Ring Resonators (CSRR)
CSRRs are etched into the ground plane. Build them with Gerber import or Boolean subtraction:
```matlab
P = gerberRead('csrr_top.gtl', 'csrr_bot.gbl');
pb = pcbComponent(P);
pb.BoardShape = antenna.Rectangle('Length', L, 'Width', W);
pb.Substrate = dielectric(...);
pb.BoardThickness = h;
```
## SIW Integration
Split-ring resonators can be embedded in SIW bandpass filters:
```matlab
f = SIWFilter;
f.Resonator = splitRing(Type="Circle");
f.NumResonators = 3;
f.ResonatorSpacing = 5e-3;
```
## Balun Section-Design Functions
`balunCoupledLine` has no `design()` method. Use three section-design functions:
```matlab
% 1. Design coupled-line section
[L, W, S] = designCoupledLine(balunCoupledLine, 4e9, Z0e=159, Z0o=51);
b.CoupledLineLength = L;
b.CoupledLineWidth = W;
b.CoupledLineSpacing = S;
% 2. Design output line section
[L, W] = designOutputLine(balunCoupledLine, 4e9, Z0e=159, Z0o=51, Z0=59, Zref=50);
b.OutputLineLength = L;
b.OutputLineWidth = W;
% 3. Design uncoupled line section
[L, W] = designUncoupledLine(balunCoupledLine, 4e9, Z0=59);
```
### Uncoupled Line Shape
The uncoupled line section uses a `ubendMitered` shape by default:
```matlab
b.UncoupledLineShape = ubendMitered;
b.UncoupledLineShape.Length = [L1, L2, L3]; % Array: one per segment
b.UncoupledLineShape.Width = [W1, W2, W3];
```
The `Length` and `Width` of `ubendMitered` are arrays — one value per segment. Mismatched array sizes will error.
## Double Radial Stub Configuration
For a double stub, `OuterRadius`, `InnerRadius`, and `Angle` accept 2-element vectors to independently configure each stub:
```matlab
stub = stubRadialShunt(StubType="Double", ...
OuterRadius=[8e-3, 7e-3], InnerRadius=[1.2e-3, 1e-3], Angle=[90, 80]);
show(stub);
s = sparameters(stub, linspace(1e9, 6e9, 101));
rfplot(s);
```
A scalar value applies the same dimension to both stubs.
----
Copyright 2026 The MathWorks, Inc.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| brainstormingobra/superpowersYou MUST use this before any creative work - creating features, building components, adding functionality, modifying behavior, or planning anything new, in software or out of it (a talk, a business, a renovation). | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| brand-guidelinesanthropics/skillsApplies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| frontend-designanthropics/skillsGuidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| mcp-builderanthropics/skillsGuide for creating high-quality MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. Use when building MCP servers to integrate external APIs or services, whether in Python (FastMCP) or Node/TypeScript (MCP SDK). | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |