matlab/matlab-agentic-toolkit / skills-catalog/code-generation/matlab-deploy-embedded-code
matlab-deploy-embedded-code
VerifiedDeploy MATLAB-generated code to embedded hardware using Embedded Coder. Use when configuring code generation for microcontrollers (STM32, Raspberry Pi, ARM Cortex), setting up PIL/SIL verification, disabling dynamic memory allocation, or configuring hardware-specific code generation settings. Covers ERT-based configurations, processor-in-the-loop testing, memory constraints, and the MEX→SIL→PIL verification progression.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 10.0 KB |
| manifest.yaml | config | 439 B |
| references/simulink-config.md | markdown | 3.9 KB |
| references/supported-hardware.md | markdown | 2.2 KB |
references/supported-hardware.md
View on GitHub# Supported Hardware Targets
## STM32 Discovery Boards (ARM Cortex-M)
| Board | MCU | RAM | Flash |
|-------|-----|-----|-------|
| STM32F746G-Discovery | ARM Cortex-M7 | 340KB SRAM | 1MB |
| STM32F769I-Discovery | ARM Cortex-M7 | 512KB SRAM | 2MB |
| STM32F4-Discovery | ARM Cortex-M4 | 192KB SRAM | 1MB |
**Support package:** "Embedded Coder Support Package for STMicroelectronics Discovery Boards"
**PIL interface:** Serial (UART over USB)
```matlab
cfg.Hardware = coder.hardware("STM32F746G-Discovery");
cfg.Hardware.PILInterface = "Serial";
cfg.Hardware.PILCOMPort = "COM4"; % Windows
cfg.Hardware.PILCOMPort = "/dev/ttyACM0"; % Linux
```
**Constraints:**
- No dynamic memory — `EnableDynamicMemoryAllocation = false` required
- All arrays must be bounded at compile time
- Prefer `TargetLang = "C"` for smaller code footprint
- Set `StackUsageMax` based on available SRAM (typically 512–2048 bytes for DL models)
## Raspberry Pi (ARM Cortex-A)
| Board | MCU | RAM |
|-------|-----|-----|
| Raspberry Pi 4 Model B | ARM Cortex-A72 | 1–8GB |
| Raspberry Pi 5 | ARM Cortex-A76 | 4–8GB |
**Support package:** "MATLAB Support Package for Raspberry Pi Hardware" (or "Raspberry Pi Blockset" from R2026a)
**PIL interface:** SSH (Linux-based board)
```matlab
cfg = coder.config("lib", "ecoder", true);
cfg.VerificationMode = "PIL";
cfg.Hardware = coder.hardware("Raspberry Pi");
cfg.Hardware.BuildDir = "/home/pi/mymodel";
```
**Characteristics:**
- PIL deploys an ELF executable to the Pi and generates a PIL MEX on the host
- Runs over SSH (unlike serial for Cortex-M)
- Generates pure portable C code by default (no ARM Compute Library required)
- Dynamic memory is available but can be disabled for determinism
## Choosing Between Cortex-M and Cortex-A
| Factor | Cortex-M (STM32) | Cortex-A (Raspberry Pi) |
|--------|-------------------|------------------------|
| Memory | KB range — must be static | GB range — heap available |
| OS | Bare-metal or RTOS | Linux |
| PIL transport | Serial (UART) | SSH |
| Dynamic memory | Must disable | Optional |
| Use case | Hard real-time, low power | Soft real-time, complex models |
----
Copyright 2026 The MathWorks, Inc.
----
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 319k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 319k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 319k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 196k | Updated | Claude CodeCodex | Verified | Install |