Skip to content

matlab/matlab-agentic-toolkit / skills-catalog/rf-and-mixed-signal/matlab-analyze-antenna-structures

matlab-analyze-antenna-structures

Verified

Design and analyze electrically large antenna structures using MATLAB Antenna Toolbox. Covers reflector antennas (parabolic, Cassegrain, Gregorian, offset, corner, cylindrical, spherical, custom STL), reflectarrays and reconfigurable intelligent surfaces (RIS), antennas installed on platforms (vehicles, aircraft, ships, satellites), and radar cross section (RCS) analysis. Includes solver selection (MoM-PO, PO, MoM, FMM), mesh control, and GPU acceleration. Use when the user wants to design a dish/reflector antenna, reflectarray, analyze an antenna on a platform, or compute RCS.

references/solver-selection.md

View on GitHub
# Solver Selection Guide

This guide covers solver selection across all structure types: reflectors, installed antennas, reflectarrays, and RCS targets.

## Solver Overview

| Solver | Speed | Accuracy | Memory | Best For |
|--------|-------|----------|--------|----------|
| `"MoM-PO"` | Fast | Good | Low | Large open platforms, reflectors > 5lambda |
| `"PO"` | Fastest | Approximate | Lowest | RCS of large convex metal, quick estimates |
| `"MoM"` | Slowest | Best | O(N^2) | Small structures < 5lambda |
| `"FMM"` | Moderate | Good | Medium | Large closed/concave bodies, dielectrics |

## Decision Tree

```
Is the structure < 5 wavelengths?
├── Yes → MoM (full-wave, direct solver)
└── No → Is it a closed/concave body with multiple reflections?
    ├── Yes → FMM
    └── No → Is it for RCS computation?
        ├── Yes → PO (default for rcs())
        └── No → MoM-PO (default for installed/reflector)
```

## By Application

### Reflector Antennas

| Solver | Use When |
|--------|----------|
| `"MoM-PO"` | Default for `reflectorParabolic`, `cassegrain`, `gregorian`, `reflectorSpherical` |
| `"PO"` | Very large dishes (> 50 lambda), quick estimates |
| `"MoM"` | Small reflectors (`reflectorCorner`, `reflectorCylindrical` -- no SolverType property) |
| `"FMM"` | When MoM-PO is insufficient (complex feed interactions) |

**Note:** `reflectorCorner` and `reflectorCylindrical` do NOT have a `SolverType` property -- they always use MoM.

### Installed Antennas

| Solver | Use When |
|--------|----------|
| `"MoM-PO"` | Default. Large open platforms (plates, vehicle panels) |
| `"FMM"` | Closed bodies (fuselage, sphere), concave features, cavities |
| `"MoM"` | Wavelength-scale platforms only (impractical for large ones) |

**MoM-PO limitation:** Does not model multiple reflections. Concave regions and re-entrant corners need FMM.

### RCS Analysis

| Solver | Use When |
|--------|----------|
| `"PO"` | Default. Large convex metal structures |
| `"MoM"` | Small structures needing full-wave accuracy |
| `"FMM"` | Dielectric targets (required), concave bodies, full-wave on large structures |

**PO limitations:**
- No edge diffraction
- No multiple reflections
- Fails at grazing incidence (returns ~-250 dBsm)
- Supports GPU acceleration (`UseGPU="on"`)

**Dielectric targets require FMM.** PO and MoM error on pure dielectric structures.

### Reflectarrays

Reflectarray unit cells use `infiniteArray` which has its own periodic solver (Floquet mode expansion). No explicit `SolverType` selection needed -- it uses the periodic Green's function internally. Control accuracy via `numSummationTerms(ia, N)` (default N=15).

## FMM Configuration

### Formulations

| Formulation | Geometry | Notes |
|-------------|----------|-------|
| EFIE | Open or closed | Default, works everywhere. Only user-settable formulation. |

**Note:** CFIE exists as an internal class (`em.solvers.CFIE`) but is not user-assignable — `SolverType` only accepts `"MoM"`, `"MoM-PO"`, `"FMM"`, `"PO"`. MFIE does not exist in R2026a.

### Tuning Parameters

```matlab
ant.SolverType = "FMM";
s = solver(ant);
s.Iterations = 200;         % max GMRES iterations (default: 100)
s.RelativeResidual = 1e-4;  % convergence tolerance
s.Precision = 2e-4;         % FMM precision
```

### Convergence Verification

Always verify after FMM analysis:

```matlab
Z = impedance(ant, freq);
s = solver(ant);
figure; convergence(s);
```

If not converged:
1. Increase `Iterations` (200 or 500)
2. Refine mesh (lambda/12 or finer)

## Meshing Guidelines

| Solver | Density | Notes |
|--------|---------|-------|
| MoM-PO | ~lambda/6 | PO region less sensitive |
| FMM | ~lambda/10 | 10 elements per wavelength |
| MoM | ~lambda/10 | Standard MoM requirement |
| PO (RCS) | Default mesh adequate | Insensitive to mesh density |

```matlab
c = physconst("LightSpeed");
lambda = c / freq;

% FMM or MoM
mesh(ant, MaxEdgeLength=lambda/10);

% MoM-PO (coarser acceptable)
mesh(ant, MaxEdgeLength=lambda/6);
```

## Electrical Size Guide

| Size (D/lambda) | Recommended | Notes |
|-----------------|-------------|-------|
| < 5 | MoM | Direct solver, exact |
| 5 - 50 | MoM-PO | Hybrid, good balance |
| > 50 | PO or FMM | PO fastest, FMM for accuracy |

Use `memoryEstimate(ant, freq)` before running large analyses. Note: `memoryEstimate` does not support `installedAntenna` — use it on the standalone element or platform to estimate.

## Solver by Application Table

| Application | Solver Used By |
|-------------|----------------|
| `rcs()` function | PO (default), MoM, FMM |
| `installedAntenna` | MoM-PO (default), MoM, FMM |
| `reflectorParabolic` et al. | MoM-PO (default), PO, FMM |
| `reflectorCorner` | MoM only (no SolverType) |
| `reflectorCylindrical` | MoM only (no SolverType) |
| `infiniteArray` (reflectarray) | Periodic solver (internal) |

----

Copyright 2026 The MathWorks, Inc.
brainstormingobra/superpowersYou MUST use this before any creative work - creating features, building components, adding functionality, modifying behavior, or planning anything new, in software or out of it (a talk, a business, a renovation).Stars: 321kUpdated Claude CodeCodexVerifiedInstall
brand-guidelinesanthropics/skillsApplies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply.Stars: 197kUpdated Claude CodeCodexVerifiedInstall
frontend-designanthropics/skillsGuidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults.Stars: 197kUpdated Claude CodeCodexVerifiedInstall
mcp-builderanthropics/skillsGuide for creating high-quality MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. Use when building MCP servers to integrate external APIs or services, whether in Python (FastMCP) or Node/TypeScript (MCP SDK).Stars: 197kUpdated Claude CodeCodexVerifiedInstall