Skip to content

LeoYeAI/agent-master-skills / skills/aurehub-xaut-trade

xaut-trade

Flagged

Buy or sell XAUT (Tether Gold) on Ethereum. Supports market orders (Uniswap V3) and limit orders (UniswapX). Wallet modes: Foundry keystore or WDK. Delegates non-XAUT intents to registered skills (e.g. Polymarket prediction markets, Hyperliquid trading). Triggers: buy XAUT, XAUT trade, swap USDT for XAUT, sell XAUT, swap XAUT for USDT, limit order, limit buy XAUT, limit sell XAUT, check limit order, cancel limit order, XAUT when, create wallet, setup wallet, polymarket, prediction market, bet on, odds on, hyperliquid, perp, perpetual, long, short, open long, open short, close position, leverage.

FileKindSize
README.mdmarkdown15.0 KB
SKILL.mdskill md29.2 KB
SKILL.tests.yamlconfig12.1 KB
_meta.jsonconfig991 B
config.example.yamlconfig1.7 KB
references/balance.mdmarkdown2.6 KB
references/buy.mdmarkdown3.8 KB
references/limit-order-buy-place.mdmarkdown4.6 KB
references/limit-order-cancel.mdmarkdown2.2 KB
references/limit-order-sell-place.mdmarkdown4.8 KB
references/limit-order-status.mdmarkdown1.6 KB
references/live-trading-runbook.mdmarkdown3.9 KB
references/onboarding.mdmarkdown12.9 KB
references/quote.mdmarkdown2.0 KB
references/sell.mdmarkdown5.9 KB
references/skill-delegation.mdmarkdown2.8 KB
references/wallet-modes.mdmarkdown1.3 KB
scripts/__tests__/helpers.test.jsscript2.7 KB
scripts/__tests__/integration.test.jsscript1.2 KB
scripts/__tests__/swap-cli.test.jsscript3.7 KB
scripts/__tests__/wallet-init.test.jsscript10.7 KB
scripts/helpers.jsscript1.2 KB
scripts/lib/__tests__/config.test.jsscript2.9 KB
scripts/lib/__tests__/create-wallet.test.jsscript6.1 KB
scripts/lib/__tests__/erc20.test.jsscript3.3 KB
scripts/lib/__tests__/provider.test.jsscript7.6 KB
scripts/lib/__tests__/signer.test.jsscript7.6 KB
scripts/lib/__tests__/uniswap.test.jsscript3.6 KB
scripts/lib/config.jsscript4.3 KB
scripts/lib/create-wallet.jsscript5.7 KB
scripts/lib/erc20.jsscript3.8 KB
scripts/lib/export-seed.jsscript6.5 KB
scripts/lib/provider.jsscript8.3 KB
scripts/lib/signer.jsscript6.8 KB
scripts/lib/uniswap.jsscript5.3 KB
scripts/limit-order.jsscript13.6 KB
scripts/package-lock.jsonmanifest182.2 KB
scripts/package.jsonmanifest703 B
scripts/setup.shscript29.5 KB
scripts/swap.jsscript15.7 KB

references/buy.md

View on GitHub
# Buy Execution (USDT -> XAUT)

All commands below assume CWD is `$SCRIPTS_DIR` and env is sourced. Each Bash block must begin with `source ~/.aurehub/.env` and `cd "$SCRIPTS_DIR"`.

## 0. Pre-execution Declaration

- Current stage must be `Ready to Execute`
- Quote and explicit user confirmation must already be complete
- Full command must be displayed before execution

## 1. Allowance Check

```bash
source ~/.aurehub/.env
cd "$SCRIPTS_DIR"
node swap.js allowance --token USDT
```

Output:

```json
{
  "address": "0x...",
  "token": "USDT",
  "allowance": "0.0",
  "spender": "0x..."
}
```

If allowance < intended `AMOUNT_IN`, approve first.

## 2. Approve (USDT)

USDT requires a reset-to-zero before approving (handled internally by swap.js when `token_rules.USDT.requires_reset_approve: true` in config):

```bash
source ~/.aurehub/.env
cd "$SCRIPTS_DIR"
APPROVE_RESULT=$(node swap.js approve --token USDT --amount <AMOUNT_IN>)
echo "$APPROVE_RESULT"
```

Output:

```json
{
  "address": "0x...",
  "token": "USDT",
  "amount": "<AMOUNT_IN>",
  "spender": "0x...",
  "txHash": "0x..."
}
```

The reset-to-zero step is handled automatically — no separate call needed.

Report: `Approve tx: https://etherscan.io/tx/<txHash>`

## 3. Swap Execution

```bash
source ~/.aurehub/.env
cd "$SCRIPTS_DIR"
SWAP_RESULT=$(node swap.js swap --side buy --amount <AMOUNT_IN> --min-out <MIN_AMOUNT_OUT>)
echo "$SWAP_RESULT"
```

Output:

```json
{
  "address": "0x...",
  "side": "buy",
  "amountIn": "<AMOUNT_IN>",
  "minAmountOut": "<MIN_AMOUNT_OUT>",
  "txHash": "0x...",
  "status": "success",
  "gasUsed": "180000"
}
```

Report: `Swap tx: https://etherscan.io/tx/<txHash>`

> On failure (`"status": "failed"`), report retry suggestions (reduce trade amount / increase slippage tolerance / check nonce and gas).

## 3a. Swap Error Recovery

**CRITICAL**: If the swap command returns an error, exits with a non-zero code, or returns `"status": "unconfirmed"`:

1. **Do NOT retry immediately.** The transaction may have been broadcast and mined despite the RPC error.
2. Check the current balance:
   ```bash
   source ~/.aurehub/.env
   cd "$SCRIPTS_DIR"
   node swap.js balance
   ```
3. Compare the USDT balance against the pre-swap balance (from pre-flight Step 1):
   - **If USDT balance decreased by the trade amount** → the swap **succeeded**. Proceed to Result Verification (Step 4). Do NOT re-approve or re-swap.
   - **If USDT balance is unchanged** → the swap did **not** execute. Safe to retry from Step 1 (Allowance Check).
4. If a `txHash` was returned (including in the `"unconfirmed"` response), verify on Etherscan: `https://etherscan.io/tx/<txHash>`

> **Why this matters**: RPC nodes can return errors (e.g. 400, 504, "Unknown block") even when the transaction was successfully broadcast and mined. Retrying without checking balance will execute a **duplicate trade**, costing the user double.

## 4. Result Verification

```bash
source ~/.aurehub/.env
cd "$SCRIPTS_DIR"
node swap.js balance
```

Return:
- tx hash
- post-trade XAUT balance (from balance output)
- on failure, return retry suggestions

## 5. Mandatory Rules

- Before every on-chain write (approve, swap), remind the user: "About to execute an on-chain write"
- Trade execution confirmation follows:
  - `< risk.confirm_trade_usd`: show full preview, then execute without blocking confirmation
  - `>= risk.confirm_trade_usd` and `< risk.large_trade_usd`: single confirmation
  - `>= risk.large_trade_usd` or estimated slippage exceeds `risk.max_slippage_bps_warn`: double confirmation
- Approval confirmation follows `risk.approve_confirmation_mode` with force override:
  - If approve amount `> risk.approve_force_confirm_multiple * AMOUNT_IN`, require explicit approval confirmation
- Accepted confirmation phrases: "confirm approve", "confirm swap"
reverse-engineer-anythingmorluto/reaReverse engineer native, managed, Electron/JavaScript, packaged, firmware, and browser targets with REA, and build agent environments (AgentEnv bundles) of web applications from a live instance or a capture, and of Linux desktop apps with a task from a request. Use shipped-artifact or requested runtime evidence to explain features, compare versions, decompile code, or guide a reconstruction. Skip REA for ordinary source-repository architecture analysis.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
diagnosing-superpowersobra/superpowersUse when a superpowers session went wrong and your human partner wants to know why — repeated work, ignored plans, stumbles, poor results, a skill that didn't fire, "it took too long", "why is it so expensive", "what is it doing" — or wants to build a bug report for the superpowers maintainers, for the current session or a past one identified by id or path, on any harness.Stars: 323kUpdated Claude CodeCodexVerifiedInstall
dispatching-parallel-agentsobra/superpowersUse when facing 2+ independent tasks that can be worked on without shared state or sequential dependenciesStars: 323kUpdated Claude CodeCodexVerifiedInstall
executing-plansobra/superpowersUse when executing an implementation plan in the current session as the implementer yourself — your human partner chose inline execution, or no subagent tool is availableStars: 323kUpdated Claude CodeCodexVerifiedInstall