LeoYeAI/agent-master-skills / skills/acl-rule-analysis
acl-rule-analysis
VerifiedVendor-agnostic ACL and firewall rule analysis with shadowed rule detection, overly permissive rule identification, unused rule discovery, redundant rule flagging, and rule ordering optimization. Covers ACLs (Cisco/JunOS/EOS) and firewall policies (PAN-OS/FortiGate/CheckPoint).
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 17.1 KB |
| _meta.json | config | 295 B |
| references/cli-reference.md | markdown | 8.4 KB |
| references/rule-patterns.md | markdown | 11.4 KB |
references/cli-reference.md
View on GitHub# ACL and Firewall Rule Analysis — Multi-Vendor CLI Reference
Read-only commands for retrieving ACLs, firewall rulebases, and hit counts
across 6 platforms. All commands are non-modifying. Organized by audit
function with per-vendor sections.
## Cisco IOS / IOS-XE
| Function | CLI Command |
|----------|-------------|
| All ACLs (numbered and named) | `show access-lists` |
| IPv4 ACLs only | `show ip access-lists` |
| Specific ACL | `show ip access-lists [name\|number]` |
| ACL with hit counts | `show ip access-lists` (counts shown per entry by default) |
| Clear hit counts (pre-audit baseline) | `clear access-list counters [name\|number]` |
| ACL applied to interface | `show ip interface [intf] \| include access list` |
| Running config ACLs | `show running-config \| section access-list` |
| Object groups | `show object-group` |
| Device uptime (counter validity) | `show version \| include uptime` |
### Cisco IOS Notes
- Hit counts are displayed inline with each ACE (Access Control Entry) in
`show access-lists` output as `(N matches)`.
- Counters reset on device reload. Verify uptime before using hit counts
for unused rule determination.
- Extended ACLs show source, destination, protocol, and port. Standard ACLs
show source only.
## Cisco ASA
| Function | CLI Command |
|----------|-------------|
| All access lists | `show access-list` |
| Specific access list | `show access-list [name]` |
| Access list hit counts | `show access-list [name]` (hitcnt shown per ACE) |
| Clear hit counts | `clear access-list [name] counters` |
| Access groups (ACL-to-interface binding) | `show running-config access-group` |
| Object groups | `show running-config object-group` |
| Network objects | `show running-config object network` |
| Service objects | `show running-config object service` |
| NAT rules | `show running-config nat` |
| Device uptime | `show version \| include up` |
### Cisco ASA Notes
- ASA ACLs display `hitcnt=N` per ACE, providing built-in usage tracking.
- `access-group` binds ACLs to interfaces with direction (in/out) — check
both to understand effective filtering on an interface.
- Object groups and network objects expand to individual ACEs at evaluation
time — expand groups before shadow analysis.
## Juniper JunOS
| Function | CLI Command |
|----------|-------------|
| Firewall filter configuration | `show configuration firewall family inet filter` |
| Firewall filter counters | `show firewall filter [name]` |
| Specific filter term counters | `show firewall filter [name] counter [term]` |
| Policer statistics | `show policer` |
| Filter applied to interface | `show configuration interfaces [intf] unit [n] family inet filter` |
| Prefix lists | `show configuration policy-options prefix-list` |
| Security policies (SRX) | `show security policies` |
| Security policy hit counts (SRX) | `show security policies hit-count` |
| Device uptime | `show system uptime` |
### JunOS Notes
- JunOS firewall filters use `term` entries, each with `from` (match) and
`then` (action) clauses. Counters must be explicitly configured per term
with the `count` action.
- Terms without an explicit `count` action will not have hit count data —
counters are not automatic on JunOS firewall filters.
- SRX security policies (`show security policies`) have automatic hit
counting and display format similar to stateful firewall platforms.
- Implicit discard at the end of the term list unless a final `then accept`
term is present.
## Arista EOS
| Function | CLI Command |
|----------|-------------|
| All IPv4 ACLs | `show ip access-lists` |
| Specific ACL | `show ip access-lists [name]` |
| ACL counters | `show access-lists counters` |
| ACL applied to interface | `show ip interface [intf]` |
| Running config ACLs | `show running-config \| section access-list` |
| Device uptime | `show uptime` |
| Hardware TCAM utilization | `show platform trident tcam` |
### EOS Notes
- `show access-lists counters` provides per-entry match counts separately
from the ACL display — use this command specifically for hit count analysis.
- EOS ACL syntax closely mirrors Cisco IOS. Most Cisco ACL analysis logic
applies directly to EOS.
- TCAM utilization (`show platform trident tcam`) indicates hardware ACL
capacity — relevant for large ACL optimization efforts.
## Palo Alto PAN-OS
| Function | CLI Command |
|----------|-------------|
| Running security policy | `show running security-policy` |
| Rule hit counts | `show rule-hit-count vsys vsys1 security rules all` |
| Specific rule hit count | `show rule-hit-count vsys vsys1 security rules rule-name [name]` |
| Test policy match | `test security-policy-match source [IP] destination [IP] protocol [num] application [app] destination-port [port] from [zone] to [zone]` |
| NAT policy | `show running nat-policy` |
| Address objects | `show running address` |
| Address groups | `show running address-group` |
| Service objects | `show running service` |
| Service groups | `show running service-group` |
| Application details | `show running application [name]` |
| Device uptime | `show system info \| match uptime` |
### PAN-OS Notes
- `show rule-hit-count` provides first-hit, last-hit, and total count per
rule — last-hit timestamp is especially useful for identifying stale rules.
- The `test security-policy-match` command is the definitive tool for
validating which rule matches specific traffic.
- PAN-OS rules evaluate: pre-rules → local rules → post-rules (Panorama).
Shadow analysis must consider rule scope (pre/local/post).
### PAN-OS XML API
| Function | API Call |
|----------|---------|
| Full security rulebase | `GET /api/?type=config&action=get&xpath=/config/devices/entry/vsys/entry[@name='vsys1']/rulebase/security` |
| Address objects | `GET /api/?type=config&action=get&xpath=/config/devices/entry/vsys/entry[@name='vsys1']/address` |
| Rule hit counts | `GET /api/?type=op&cmd=<show><rule-hit-count><vsys><vsys-name><entry name='vsys1'><rule-base><entry name='security'><rules><all/></rules></entry></rule-base></entry></vsys-name></vsys></rule-hit-count></show>` |
## Fortinet FortiGate (FortiOS)
| Function | CLI Command |
|----------|-------------|
| All firewall policies | `get firewall policy` |
| Specific policy | `get firewall policy [id]` |
| Policy hit counts (packets/bytes) | `diagnose firewall iprope list` |
| Policy lookup for specific traffic | `diagnose firewall iprope lookup [src-ip] [dst-ip] [proto] [src-port] [dst-port]` |
| Address objects | `show firewall address` |
| Address groups | `show firewall addrgrp` |
| Service objects | `show firewall service custom` |
| Service groups | `show firewall service group` |
| Device uptime | `get system performance status` |
### FortiGate Notes
- `diagnose firewall iprope list` displays per-policy packet and byte
counters. Zero counters indicate unused policies.
- FortiGate policies use numeric IDs and display in order of evaluation.
The `policyid` is the unique identifier for each rule.
- Implicit deny is the last policy (ID 0, not displayed in `get firewall
policy` — visible via `diagnose firewall iprope list`).
### FortiGate REST API
| Function | API Call |
|----------|---------|
| All firewall policies | `GET /api/v2/cmdb/firewall/policy` |
| Specific policy | `GET /api/v2/cmdb/firewall/policy/[id]` |
| Address objects | `GET /api/v2/cmdb/firewall/address` |
## Check Point
| Function | CLI Command |
|----------|-------------|
| Firewall status and policy name | `fw stat` |
| Policy statistics | `cpstat fw -f policy` |
| Installed policy details | `fw stat -l` |
| Connection table | `fw tab -t connections -s` |
| Rule hit counts | SmartConsole → Policy → right-click column header → enable Hit Count |
| Exported rulebase | SmartConsole → File → Export Policy (CSV/HTML) |
| Management API: list access rules | `mgmt_cli show access-rulebase name [policy-name]` |
| Management API: specific rule | `mgmt_cli show access-rule layer [layer] rule-number [n]` |
| Device uptime | `cpstat os -f ifconfig` |
### Check Point Notes
- Check Point hit count data is stored in SmartConsole, not on the gateway
CLI. Use the Management API (`mgmt_cli`) for programmatic access.
- `mgmt_cli show access-rulebase` returns rules as JSON, suitable for
automated shadow and redundancy analysis.
- Check Point uses layers (ordered and inline) — shadow analysis must
account for layer evaluation order.
- The implicit drop rule (Cleanup Rule) is the last rule in the policy
and is configurable in SmartConsole.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack." | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |