K-Dense-AI/scientific-agent-skills / skills/lab-hardware-cad
lab-hardware-cad
VerifiedDesigns custom laboratory hardware as parametric build123d models and exports fabrication artifacts as STEP, STL, and DXF files - microfluidic chips and molds, optomechanical mounts and breadboard adapters, cuvette and microplate holders, tube racks, animal-behavior rigs, and 3D-printed instrument fixtures. Use when a research task needs a physical part that must mate with standardized labware, an optical table, a cage system, or a printer, CNC, or laser process.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 22.3 KB |
| assets/standards.json | config | 16.8 KB |
| references/behavior-rigs.md | markdown | 7.6 KB |
| references/build123d-patterns.md | markdown | 17.8 KB |
| references/fabrication-limits.md | markdown | 9.0 KB |
| references/labware-adapters.md | markdown | 10.6 KB |
| references/microfluidics.md | markdown | 9.5 KB |
| references/optomechanics.md | markdown | 7.2 KB |
| references/validation.md | markdown | 6.7 KB |
| scripts/_common.py | script | 27.2 KB |
| scripts/check.py | script | 27.9 KB |
| scripts/gen.py | script | 10.5 KB |
| scripts/snapshot.py | script | 10.7 KB |
assets/standards.json
View on GitHub{
"schema_version": "1.0",
"units": "mm",
"note": "Dimensions in mm unless a dimension carries unit. Verified means the stated nominal source was checked, not that a fabrication tolerance or material fit is guaranteed. Zero tolerance on basic/vendor nominal data is not a physical zero-tolerance specification. Unverified entries require a vendor drawing or measurement.",
"last_reviewed": "2026-10-01",
"standards": {
"slas-microplate-footprint": {
"title": "Microplate footprint (base outline)",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 1-2004 (R2012) Footprint Dimensions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_1-2004_FootprintDimensions.pdf",
"verified": true,
"dimensions": {
"footprint_length": {"nominal": 127.76, "tol_plus": 0.5, "tol_minus": 0.5, "note": "Section 4.1.1.2: overall base footprint at any point along the side. Use this band for a continuous receiving pocket. Does not specify the plate wall, lid, or draft above the base."},
"footprint_width": {"nominal": 85.48, "tol_plus": 0.5, "tol_minus": 0.5, "note": "Section 4.1.1.2: overall base footprint at any point along the side. Use this band for a continuous receiving pocket. Does not specify the plate wall, lid, or draft above the base."},
"corner_radius": {"nominal": 3.18, "tol_plus": 1.6, "tol_minus": 1.6, "note": "Outside radius of the four bottom-flange corners (convex). A receiving pocket's internal fillet must be no LARGER than the minimum (1.58) or it bulges into the plate corner and binds; a sharp pocket corner or a corner-relief cut always clears. Do not size the pocket fillet to the maximum radius."},
"footprint_length_at_corners": {"nominal": 127.76, "tol_plus": 0.25, "tol_minus": 0.25, "note": "Section 4.1.1.1: only within 12.7 mm of outside corners; do not use for a continuous pocket."},
"footprint_width_at_corners": {"nominal": 85.48, "tol_plus": 0.25, "tol_minus": 0.25, "note": "Section 4.1.1.1: only within 12.7 mm of outside corners; do not use for a continuous pocket."}
},
"fit_checks": [
{"measure": "bbox_x", "dimension": "footprint_length"},
{"measure": "bbox_y", "dimension": "footprint_width"}
],
"design_note": "Continuous base pocket: size from 128.26 x 85.98 mm overall maximum envelope, then add process allowance and functional clearance. Near-corner locating pads may use the separate _at_corners dimensions. Upper plate body, draft and lid require the vendor drawing."
},
"slas-microplate-height": {
"title": "Microplate height",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 2-2004 (R2012) Height Dimensions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_2-2004_HeightDimensions.pdf",
"verified": true,
"dimensions": {
"plate_height": {"nominal": 14.35, "tol_plus": 0.25, "tol_minus": 0.25, "note": "Sections 4.1.1.1 and 4.2.1.1: resting plane to perimeter wells, not the overall bounding box. Deep-well and lidded plates require vendor dimensions."},
"overall_plate_height": {"nominal": 14.35, "tol_plus": 0.76, "tol_minus": 0.76, "note": "Sections 4.1.1.2 and 4.2.1.2: resting plane to maximum protrusion of the plate; maximum 15.11 mm."}
},
"fit_checks": [
{"measure": "bbox_z", "dimension": "overall_plate_height"}
]
},
"slas-microplate-flange": {
"title": "Microplate bottom outside flange height",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 3-2004 (R2012) Bottom Outside Flange Dimensions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_3-2004_BottomOutsideFlangeDimensions.pdf",
"verified": true,
"dimensions": {
"flange_height_short": {"nominal": 2.41, "tol_plus": 0.38, "tol_minus": 0.38},
"flange_height_medium": {"nominal": 6.1, "tol_plus": 0.38, "tol_minus": 0.38},
"flange_height_tall": {"nominal": 7.62, "tol_plus": 0.38, "tol_minus": 0.38}
},
"fit_checks": [],
"design_note": "Sections 4.1-4.3 define three uniform heights. Sections 4.4 and 4.5 also permit interrupted short flanges and dual heights. Obtain the actual flange class/profile before designing a gripper."
},
"slas-well-positions-96": {
"title": "96-well plate well positions",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 4-2004 (R2012) Well Positions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_4-2004_WellPositions.pdf",
"verified": true,
"dimensions": {
"well_pitch": {"nominal": 9.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Centre-to-centre in both x and y."},
"a1_offset_x": {"nominal": 14.38, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Left outside edge to the centre of column 1."},
"a1_offset_y": {"nominal": 11.24, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Top outside edge to the centre of row A."},
"well_position_tolerance": {"nominal": 0.7, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Each well centre lies within a 0.70 mm diameter of nominal. This is a positional tolerance zone, not a +/- band."}
},
"fit_checks": [],
"design_note": "Grid layout: x = a1_offset_x + 9.0 * column_index, y = a1_offset_y + 9.0 * row_index, measured from the plate outline corner."
},
"slas-well-positions-384": {
"title": "384-well plate well positions",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 4-2004 (R2012) Well Positions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_4-2004_WellPositions.pdf",
"verified": true,
"dimensions": {
"well_pitch": {"nominal": 4.5, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Centre-to-centre in both x and y."},
"a1_offset_x": {"nominal": 12.13, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Verified directly in ANSI/SLAS 4-2004, section 4.2. Datum is the near-corner edge zones, not a bowed side midpoint."},
"a1_offset_y": {"nominal": 8.99, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Verified directly in ANSI/SLAS 4-2004, section 4.2. Datum is the near-corner edge zones, not a bowed side midpoint."},
"well_position_tolerance": {"nominal": 0.7, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Diameter of true-position zone at RFS; not a bilateral +/- band."}
},
"fit_checks": [],
"design_note": "Nominal coordinates are basic dimensions; apply the radial half of well_position_tolerance plus registration and manufacturing error for a clearance gauge."
},
"slas-well-positions-1536": {
"title": "1536-well plate well positions",
"authority": "ANSI/SLAS",
"document": "ANSI/SLAS 4-2004 (R2012) Well Positions",
"url": "https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_4-2004_WellPositions.pdf",
"verified": true,
"dimensions": {
"well_pitch": {"nominal": 2.25, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Centre-to-centre in both x and y."},
"a1_offset_x": {"nominal": 11.005, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Verified directly in ANSI/SLAS 4-2004, section 4.3. Datum is the near-corner edge zones, not a bowed side midpoint."},
"a1_offset_y": {"nominal": 7.865, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Verified directly in ANSI/SLAS 4-2004, section 4.3. Datum is the near-corner edge zones, not a bowed side midpoint."},
"well_position_tolerance": {"nominal": 0.5, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Diameter of true-position zone at RFS; not a bilateral +/- band."}
},
"fit_checks": [],
"design_note": "Nominal coordinates are basic dimensions; apply the radial half of well_position_tolerance plus registration and manufacturing error for a clearance gauge."
},
"cuvette-standard-10mm": {
"title": "Standard 10 mm path-length spectrophotometer cuvette",
"authority": "De facto industry convention",
"document": "Hellma 2025 cuvette catalogue: common 10 mm path-length rectangular formats; not a universal dimensional standard.",
"url": "https://www.hellma.com/fileadmin/fos/Website/Broschueren_Flyer_Handhabung/Hellma_Analytics/Englisch/Hellma_Kuevettenkatalog_EN_2025_gross.pdf",
"verified": false,
"dimensions": {
"external_width": {"nominal": 12.5, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance: illustrative nominal only; require the selected catalogue number drawing or measurement. Zero here does not mean zero manufacturing tolerance."},
"external_depth": {"nominal": 12.5, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance: illustrative nominal only; require the selected catalogue number drawing or measurement. Zero here does not mean zero manufacturing tolerance."},
"external_height": {"nominal": 45.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance: illustrative nominal only; require the selected catalogue number drawing or measurement. Zero here does not mean zero manufacturing tolerance."},
"path_length": {"nominal": 10.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance: illustrative nominal only; require the selected catalogue number drawing or measurement. Zero here does not mean zero manufacturing tolerance."},
"wall_thickness": {"nominal": 1.25, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED illustrative optical-wall thickness, not all four walls. Internal width and base thickness differ by cuvette model."}
},
"fit_checks": [
{"measure": "bbox_x", "dimension": "external_width"},
{"measure": "bbox_y", "dimension": "external_depth"}
],
"design_note": "Nominal 45 x 12.5 x 12.5 mm rectangular formats exist, but no common tolerance is asserted. Fit output remains unverified; use the actual cuvette envelope including cap and optical-window height."
},
"optical-breadboard-metric": {
"title": "Metric optical breadboard hole grid",
"authority": "De facto industry convention",
"document": "Thorlabs Imperial and Metric Threading: grid and thread conventions; hole and counterbore numbers below are planning examples.",
"url": "https://www.thorlabs.com/imperial-and-metric-threading",
"verified": true,
"dimensions": {
"grid_pitch": {"nominal": 25.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Metric grid. NOT interchangeable with the 25.4 mm imperial grid."},
"thread": {"nominal": 6.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "M6 x 1.0 tapped holes."},
"clearance_hole_close": {"nominal": 6.4, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. Close-fit clearance for an M6 cap screw.", "verified": false},
"clearance_hole_normal": {"nominal": 6.6, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. Normal-fit clearance for M6. Prefer this on printed parts.", "verified": false},
"counterbore_dia": {"nominal": 11.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. For an M6 socket head cap screw head (nominal head dia 10 mm).", "verified": false},
"screw_head_height": {"nominal": 6.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. M6 socket head cap screw head height (ISO 4762). A counterbore shallower than this leaves the head proud, not flush.", "verified": false},
"border": {"nominal": 12.5, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. Typical edge-to-first-hole distance. A property of the TABLE, not of your part: your plate's edge margin is a free design choice, so do not declare this as an interface.", "verified": false}
},
"fit_checks": [],
"design_note": "Slot rather than hole one of any pair of mounting features to absorb grid and print tolerance."
},
"optical-breadboard-imperial": {
"title": "Imperial optical breadboard hole grid",
"authority": "De facto industry convention",
"document": "Thorlabs Imperial and Metric Threading: grid and thread conventions; hole and counterbore numbers below are planning examples.",
"url": "https://www.thorlabs.com/imperial-and-metric-threading",
"verified": true,
"dimensions": {
"grid_pitch": {"nominal": 25.4, "tol_plus": 0.0, "tol_minus": 0.0, "note": "1 inch exactly. Over four holes this differs from the metric grid by 1.6 mm."},
"thread_major_dia": {"nominal": 6.35, "tol_plus": 0.0, "tol_minus": 0.0, "note": "1/4-20 UNC: 0.25 inch major diameter, 20 threads per inch."},
"clearance_hole_normal": {"nominal": 6.8, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. Normal-fit clearance for a 1/4-20 screw.", "verified": false},
"counterbore_dia": {"nominal": 11.2, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. For a 1/4-20 socket head cap screw head.", "verified": false},
"screw_head_height": {"nominal": 6.35, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. 1/4-20 socket head cap screw head height (0.25 inch). A counterbore shallower than this leaves the head proud, not flush.", "verified": false},
"border": {"nominal": 12.7, "tol_plus": 0.0, "tol_minus": 0.0, "note": "UNVERIFIED tolerance/fit. Planning example, not a tolerance specification. Confirm the actual fastener/table drawing and process. Typical 0.5 inch edge-to-first-hole distance. A property of the TABLE, not of your part: your plate's edge margin is a free design choice, so do not declare this as an interface.", "verified": false}
},
"fit_checks": [],
"design_note": "Ask which table the user has. Assuming the wrong system is the most common optomechanical design error."
},
"cage-system-30mm": {
"title": "30 mm cage system",
"authority": "Thorlabs (de facto standard, second-sourced by others)",
"document": "Thorlabs 30 mm cage system construction rods and cage plates",
"url": "https://www.thorlabs.com/standard-30-mm-cage-plates",
"verified": true,
"dimensions": {
"rod_spacing": {"nominal": 30.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "Rod centre to rod centre, on a square pattern. 1.18 inch."},
"rod_diameter": {"nominal": 6.0, "tol_plus": 0.0, "tol_minus": 0.0, "note": "ER series cage rods."},
"plate_thickness_typical": {"nominal": 8.9, "tol_plus": 0.0, "tol_minus": 0.0, "note": "0.35 inch, the CP33 standard cage plate. Informational, not a mating dimension: custom plates may be any thickness, but matching it keeps optical path budgets simple."}
},
"fit_checks": [],
"design_note": "The 30 mm rod square is centred on the optical axis. A custom plate must place its aperture at the centroid of the four rod bores. Bore diameter is rod_diameter plus twice the free-sliding per-side clearance for YOUR process (fabrication-limits.md): about 6.2 CNC, 6.4 SLA, 6.8 FDM. A 6.1 mm nominal bore is not a reliable uncalibrated printed fit; validate the actual process and rod drawing. Four bores on a common square over-constrain each other, so do not go tighter than the fits table. Declare the bore against rod_diameter with intent envelope and the clearance you chose."
},
"sm1-lens-tube-thread": {
"title": "SM1 lens tube thread",
"authority": "Thorlabs (de facto standard)",
"document": "Thorlabs SM1 series threading",
"url": "https://www.thorlabs.com/imperial-and-metric-threading",
"verified": true,
"dimensions": {
"thread_major_dia": {"nominal": 26.289, "tol_plus": 0.0, "tol_minus": 0.0, "note": "1.035 inch-40 thread. Holds 1 inch diameter optics."},
"threads_per_inch": {"nominal": 40.0, "tol_plus": 0.0, "tol_minus": 0.0, "unit": "1/in"},
"pitch": {"nominal": 0.635, "tol_plus": 0.0, "tol_minus": 0.0, "note": "25.4 / 40 mm."},
"optic_dia": {"nominal": 25.4, "tol_plus": 0.0, "tol_minus": 0.0, "note": "1 inch optic."}
},
"fit_checks": [],
"design_note": "A 40 TPI thread has a 0.635 mm pitch, which is at or below the resolution of most FDM printers. Print a clearance bore and use a purchased SM1 adapter or a tapped insert rather than printing the thread."
}
}
}
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| brainstormingobra/superpowersYou MUST use this before any creative work - creating features, building components, adding functionality, modifying behavior, or planning anything new, in software or out of it (a talk, a business, a renovation). | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| brand-guidelinesanthropics/skillsApplies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| frontend-designanthropics/skillsGuidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| mcp-builderanthropics/skillsGuide for creating high-quality MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. Use when building MCP servers to integrate external APIs or services, whether in Python (FastMCP) or Node/TypeScript (MCP SDK). | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |