Skip to content

itsadrianxv/tradeblazer_skills / skills/tb-bar-strategy

tb-bar-strategy

Verified

Use when generating, modifying, explaining, or reviewing TBQ3 Bar-based trading strategies with OnBar, OnInit, OnReady, entries, exits, MarketPosition, stop profit/loss, sizing, slippage, commission, multi-symbol, or cross-period logic.

FileKindSize
SKILL.mdskill md2.8 KB
references/bar-patterns.mdmarkdown3.6 KB
references/bar-pitfalls.mdmarkdown2.1 KB

references/bar-patterns.md

View on GitHub
# Bar 策略短模板

这些模板用于提示结构和关键约束。正式生成前,复杂函数语义仍应查 `docs` 原文。

## 四周突破

```cpp
Vars
    Numeric highLine;
    Numeric lowLine;
Events
OnBar(ArrayRef<Integer> indexs)
{
    highLine = Highest(High[1], 20);
    lowLine = Lowest(Low[1], 20);

    If(MarketPosition <> 1 And High >= highLine)
        Buy(1, Max(Open, highLine));

    If(MarketPosition <> -1 And Low <= lowLine)
        SellShort(1, Min(Open, lowLine));
}
```

要点:用 `High[1]`、`Low[1]` 排除当前 Bar;用 `MarketPosition` 避免突破后连续加仓。

## 均线交叉

```cpp
Params
    Integer fastLen(10);
    Integer slowLen(30);
Vars
    Numeric fastMa;
    Numeric slowMa;
Events
OnBar(ArrayRef<Integer> indexs)
{
    fastMa = Average(Close, fastLen);
    slowMa = Average(Close, slowLen);

    If(MarketPosition <> 1 And fastMa CrossOver slowMa)
        Buy(1, Open);

    If(MarketPosition <> -1 And slowMa CrossOver fastMa)
        SellShort(1, Open);
}
```

要点:如果不确认 `CrossOver` 语法,查函数文档或改用文档支持的函数写法。

## 固定保证金开仓

```cpp
Params
    Numeric money(10); // 固定保证金,单位万
Vars
    Numeric myPrice;
    Numeric lots;
Events
OnInit()
{
    SetMarginRate(0.1);
    SetInitCapital(1000000);
}

OnBar(ArrayRef<Integer> indexs)
{
    myPrice = Open;
    lots = IntPart(money * 10000 / (myPrice * ContractUnit * BigPointValue * MarginRatio));
    If(lots < 1) lots = 1;

    If(MarketPosition <> 1)
        Buy(lots, Open);
}
```

要点:固定市值开仓不乘 `MarginRatio`;固定保证金开仓需要乘 `MarginRatio`。

## 止盈止损

```cpp
Vars
    Numeric minPoint;
    Numeric entryPrice;
    Numeric exitPrice;
    Numeric takeProfitSet(30);
    Numeric stopLossSet(20);
Events
OnBar(ArrayRef<Integer> indexs)
{
    minPoint = MinMove * PriceScale;
    entryPrice = AvgEntryPrice;

    If(MarketPosition == 1 And BarsSinceEntry >= 1)
    {
        If(High >= entryPrice + takeProfitSet * minPoint)
        {
            exitPrice = entryPrice + takeProfitSet * minPoint;
            If(Open > exitPrice) exitPrice = Open;
            Sell(0, exitPrice);
        }
        Else If(Low <= entryPrice - stopLossSet * minPoint)
        {
            exitPrice = entryPrice - stopLossSet * minPoint;
            If(Open < exitPrice) exitPrice = Open;
            Sell(0, exitPrice);
        }
    }
    Else If(MarketPosition == -1 And BarsSinceEntry >= 1)
    {
        If(Low <= entryPrice - takeProfitSet * minPoint)
        {
            exitPrice = entryPrice - takeProfitSet * minPoint;
            If(Open < exitPrice) exitPrice = Open;
            BuyToCover(0, exitPrice);
        }
        Else If(High >= entryPrice + stopLossSet * minPoint)
        {
            exitPrice = entryPrice + stopLossSet * minPoint;
            If(Open > exitPrice) exitPrice = Open;
            BuyToCover(0, exitPrice);
        }
    }
}
```

要点:止盈和止损同时满足时,Bar 级数据无法判断先后,应说明风险或切换更小周期。

## 平仓延迟反手

```cpp
Vars
    Bool needLong(False);
    Bool needShort(False);
Events
OnBar(ArrayRef<Integer> indexs)
{
    If(/* 多头信号 */)
    {
        If(MarketPosition == -1)
        {
            BuyToCover(0, Open);
            needLong = True;
        }
        Else If(MarketPosition == 0)
            Buy(1, Open);
    }

    If(needLong And MarketPosition == 0 And BarsSinceExit >= 1)
    {
        Buy(1, Open);
        needLong = False;
    }
}
```

要点:延迟反手要明确状态变量何时置位和清除,避免同一 Bar 既平又开造成回测歧义。
receiving-code-reviewobra/superpowersUse when receiving code review feedback, before implementing suggestions, especially if feedback seems unclear or technically questionable - requires technical rigor and verification, not performative agreement or blind implementationStars: 322kUpdated Claude CodeCodexVerifiedInstall
requesting-code-reviewobra/superpowersUse when completing tasks, implementing major features, or before merging to verify work meets requirementsStars: 322kUpdated Claude CodeCodexVerifiedInstall
using-git-worktreesobra/superpowersUse when starting feature work that needs isolation from current workspace or before executing implementation plans - ensures an isolated workspace exists via native tools or git worktree fallbackStars: 322kUpdated Claude CodeCodexVerifiedInstall
verification-before-completionobra/superpowersUse when about to claim work is complete, fixed, or passing, before committing or creating PRs - requires running verification commands and confirming output before making any success claims; evidence before assertions alwaysStars: 322kUpdated Claude CodeCodexVerifiedInstall