Skip to content

hashgraph-online/awesome-codex-plugins / plugins/aklofas/kicad-happy/skills/emc

EMC pre-compliance risk analysis for KiCad PCB designs — 18 check categories, 44 rule IDs covering ground planes, decoupling, I/O filtering, switching harmonics, clock routing, differential pair skew, board edge radiation, PDN impedance, return paths, crosstalk, ESD protection, shielding, and magnetic leakage from switching inductors. Produces severity-ranked risk report with pre-compliance test plan. Supports FCC Part 15, CISPR 32, CISPR 25 (automotive), MIL-STD-461G. SPICE-enhanced when available. Use when the user asks about EMC, EMI, radiated/conducted emissions, FCC compliance, CE marking, CISPR, ground plane issues, decoupling strategy, clock routing EMC, switching noise, differential pair skew, or whether their board will pass EMC testing. Also for "will this pass FCC?", "check my EMC", "is my ground plane okay?", "check my decoupling", or "generate an EMC test plan".

references/emc-standards.md

View on GitHub
# EMC Standards Quick Reference

All limit values verified against official regulatory text and accredited test lab documentation (April 2026).

## Radiated Emission Limits

### FCC Part 15 (US)

Source: [47 CFR §15.109](https://www.law.cornell.edu/cfr/text/47/15.109) — "Radiated emission limits."

#### Class B (Residential) — measured at 3m

| Frequency (MHz) | Limit (µV/m) | Limit (dBµV/m) |
|-----------------|--------------|-----------------|
| 30–88           | 100          | 40.0            |
| 88–216          | 150          | 43.5            |
| 216–960         | 200          | 46.0            |
| >960            | 500          | 54.0            |

#### Class A (Commercial/Industrial) — measured at 10m

| Frequency (MHz) | Limit (µV/m) | Limit (dBµV/m) |
|-----------------|--------------|-----------------|
| 30–88           | 90           | 39.1            |
| 88–216          | 150          | 43.5            |
| 216–960         | 210          | 46.4            |
| >960            | 300          | 49.5            |

### CISPR 32 / EN 55032 (International / EU CE) — measured at 10m

Source: IEC CISPR 32:2015+AMD1:2019. EN 55032 is the EU harmonized version. These values replace the older CISPR 22 / EN 55022. CISPR 32 also specifies limits at 3m: Class A = 50/57 dBµV/m, Class B = 40/47 dBµV/m.

| Frequency (MHz) | Class A (dBµV/m) | Class B (dBµV/m) |
|-----------------|-------------------|-------------------|
| 30–230          | 40                | 30                |
| 230–1000        | 47                | 37                |

**FCC vs CISPR comparison:** When normalized for distance (3m→10m = −10.5 dB), FCC Class B and CISPR 32 Class B are roughly equivalent — within 0–3 dB depending on frequency band. Designs that pass CISPR 32 Class B generally pass FCC Part 15 Class B and vice versa.

### CISPR 25 Class 5 (Automotive) — measured at 1m

Source: IEC CISPR 25:2021. Tested in Absorber Lined Shielded Enclosure (ALSE). Five limit classes; Class 5 is the most stringent.

| Band     | Frequency      | Peak (dBµV/m) |
|----------|---------------|----------------|
| FM       | 68–108 MHz    | ~28            |
| VHF      | 108–230 MHz   | ~26            |
| UHF      | 230–1000 MHz  | ~32            |

*Note: Exact values are in the copyrighted IEC standard. Above are approximate, sourced from published technical articles.*

10–20 dB tighter than CISPR 32 Class B when normalized for distance. Automotive EMC is the most difficult regulatory environment.

### MIL-STD-461G RE102 (Military)

Source: MIL-STD-461G, "Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment" (2015).

RE102 covers radiated electric field emissions from 10 kHz to 18 GHz. Limits vary by application (ground, ship, aircraft) and typically range from 24–70 dBµV/m with notches at receiver bands. Custom limits are common.

## Conducted Emission Limits (150 kHz – 30 MHz, AC mains)

### FCC Part 15 Class B

Source: [47 CFR §15.107](https://www.law.cornell.edu/cfr/text/47/15.107) — "Conducted limits."

| Frequency (MHz) | Quasi-Peak (dBµV) | Average (dBµV) |
|-----------------|-------------------|----------------|
| 0.15–0.5        | 66→56             | 56→46          |
| 0.5–5           | 56                | 46             |
| 5–30            | 60                | 50             |

The 0.15–0.5 MHz limits decrease linearly with the logarithm of frequency across the band.

## Key Thresholds

- **5 µA** common-mode current on a 1m cable at 100 MHz produces 46.4 dBµV/m at 3m — exceeds FCC Class B (43.5 dBµV/m) by ~3 dB. *Ref: Ott, "EMC Engineering" Ch. 6; verified by direct calculation from E = µ₀fLI/r.*
- **6 dB** minimum design margin recommended for pre-compliance confidence, accounting for measurement uncertainty (±3.6 dB RSS of chamber, preamp, analyzer, and antenna cal uncertainties).
- Industry estimates suggest **approximately 50%** of products fail EMC testing on first attempt. *Widely cited by Dr. Todd Hubing (LearnEMC.com, Clemson University CVEL) and commercial test labs. This is an experience-based industry consensus figure, not a peer-reviewed statistic.*

## Distance Conversion

Far-field inverse distance law: 20 × log₁₀(d₁/d₂) dB.

| From → To | Correction |
|-----------|------------|
| 3m → 10m  | −10.5 dB   |
| 10m → 3m  | +10.5 dB   |
| 1m → 3m   | −9.5 dB    |
| 1m → 10m  | −20.0 dB   |

## IEC 61000-4-x Immunity Tests (PCB-Relevant)

Source: IEC 61000-4 series. These define immunity/susceptibility test levels. PCB design directly affects whether a product passes.

| Standard | Test | Level | PCB Design Impact |
|----------|------|-------|-------------------|
| IEC 61000-4-2 | ESD | ±4 to ±8 kV | TVS placement near connector; trace routing; ground plane |
| IEC 61000-4-3 | Radiated RF immunity | 3–10 V/m | RF bypass caps on analog inputs; ground plane shielding |
| IEC 61000-4-4 | EFT/Burst | ±1–2 kV | Input filtering; ground plane; decoupling |
| IEC 61000-4-5 | Surge | ±0.5–2 kV | TVS/MOV placement; trace width; creepage |
| IEC 61000-4-6 | Conducted RF immunity | 3–10 V EMF | CM chokes on cables; ferrite placement |

## References

- 47 CFR Part 15 — [Cornell Law Institute](https://www.law.cornell.edu/cfr/text/47/part-15)
- IEC CISPR 32:2015+AMD1:2019 — "Electromagnetic compatibility of multimedia equipment"
- IEC CISPR 25:2021 — "Vehicles, boats and internal combustion engines — Radio disturbance characteristics"
- MIL-STD-461G:2015 — "Requirements for the Control of EMI Characteristics"
- Ott, H.W. *Electromagnetic Compatibility Engineering.* Wiley, 2009.
- Paul, C.R. *Introduction to Electromagnetic Compatibility.* 2nd ed., Wiley, 2006.
finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the workStars: 322kUpdated Claude CodeCodexVerifiedInstall
systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixesStars: 322kUpdated Claude CodeCodexVerifiedInstall
test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation codeStars: 322kUpdated Claude CodeCodexVerifiedInstall
skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy.Stars: 198kUpdated Claude CodeCodexVerifiedInstall