hashgraph-online/awesome-codex-plugins / plugins/aklofas/kicad-happy/skills/datasheets
datasheets
VerifiedExtract structured specifications from electronic component datasheet PDFs — pinouts, electrical characteristics, peripherals, topology, and features. Cache extractions per project for consumption by schematic and PCB analyzers. Primary consumer infrastructure for `kicad`, `emc`, `spice`, and `thermal` analyzers. Use this skill whenever the user asks to extract, verify, or read specs from a component datasheet; when analyzers need verified IC knowledge (EN pin thresholds, PG presence, USB peripheral speed); or when a review mentions datasheet coverage, extraction quality, or per-MPN specifications. Also triggers on "extract this datasheet", "what are the specs for MPN X", "verify datasheet extraction", or "check pin functions for part Y".
schemas/crystal.schema.json
View on GitHub{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"$id": "https://kicad-happy.local/datasheets/schemas/crystal.schema.json",
"title": "CrystalExtension",
"description": "Category extension for crystals and resonators (AT-cut quartz, ceramic resonators, TCXO, VCXO, OCXO). Layered on top of base per spec §7. Version 1.0. Field union from ABM8G-106-12.000MHZ-T (Abracon 12 MHz AT-cut SMD crystal, 3.2×2.5×1.0 mm). Only one full extraction has been checked against this schema; TCXO/VCXO/OCXO variants have no fixtures yet.",
"x-schema-version": "1.0",
"type": "object",
"required": ["crystal_type"],
"additionalProperties": false,
"properties": {
"crystal_type": {
"type": "string",
"enum": ["at_cut", "ceramic_resonator", "tcxo", "vcxo", "ocxo"],
"description": "Crystal or resonator type. at_cut: standard AT-cut quartz (most common for MHz-range consumer parts). ceramic_resonator: ceramic resonator (lower Q, wider tolerance, cheaper). tcxo: temperature-compensated crystal oscillator (integrated oscillator circuit). vcxo: voltage-controlled crystal oscillator. ocxo: oven-controlled crystal oscillator (highest stability)."
},
"frequency": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Nominal resonant frequency in Hz. Store MHz as Hz (e.g. 12 MHz → 12000000). Store kHz as Hz (e.g. 32.768 kHz → 32768). Evidence from cover page or frequency table."
},
"frequency_tolerance": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Initial frequency tolerance at +25°C in ppm (unit: 'ppm'). Symmetric tolerance stored as min/max (e.g. ±20 ppm → min=-20, max=20). Condition should note the reference temperature."
},
"frequency_stability": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Frequency stability over the operating temperature range in ppm (unit: 'ppm'), referenced to +25°C. Stored as min/max symmetric envelope. Condition specifies the temperature range."
},
"aging": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Long-term frequency aging drift in ppm (unit: 'ppm'). Condition should note the time window (e.g. 'first year'). Stored as min/max symmetric envelope (e.g. ±3 ppm/year → min=-3, max=3). Most datasheets specify aging only for the first year."
},
"load_capacitance": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Specified load capacitance in Farads (unit: 'F'). Store pF as F (e.g. 12 pF → 1.2e-11, 18 pF → 1.8e-11). This is the capacitance the oscillator circuit must present to the crystal to achieve the nominal frequency. Common values: 8 pF, 10 pF, 12 pF, 18 pF, 20 pF."
},
"motional_capacitance": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Motional (series) capacitance C1 of the Butterworth–Van Dyke equivalent circuit in Farads (unit: 'F'). Typically 1–3 fF for AT-cut crystals (e.g. 2 fF → 2e-15). Published only for AT-cut quartz; ceramic resonators, TCXO, VCXO, OCXO rarely publish this parameter. Set null when not on the datasheet."
},
"motional_inductance": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Motional inductance L1 of the Butterworth–Van Dyke equivalent circuit in Henries (unit: 'H'). Typically millihenry to henry range for AT-cut crystals. Published only for AT-cut quartz; ceramic resonators, TCXO, VCXO, OCXO rarely publish this parameter. Set null when not on the datasheet."
},
"esr_max": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Maximum equivalent series resistance (ESR or R1) in Ohms (unit: 'Ω'). This is a maximum spec — use the max field. Condition may specify frequency and load capacitance. Higher ESR parts require higher oscillator gain."
},
"drive_level_max": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Maximum allowable crystal excitation power in Watts (unit: 'W'). Store µW as W (e.g. 100 µW → 1e-4). This is a maximum spec — use the max field. Exceeding drive level causes aging acceleration and frequency deviation."
},
"operating_temp_range": {
"type": ["array", "null"],
"items": {"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json"},
"description": "Operating temperature range in degrees Celsius (unit: '°C'). Stored as min/max. Common grades: commercial (0 to +70°C), industrial (-40 to +85°C), automotive (-40 to +125°C)."
},
"mode": {
"type": ["string", "null"],
"enum": ["fundamental", "overtone_3rd", "overtone_5th", null],
"description": "Resonance mode of operation. fundamental: first overtone (most common for consumer crystals ≤30 MHz). overtone_3rd: third overtone (used for 30–100 MHz range). overtone_5th: fifth overtone (used for higher frequencies). null for ceramic resonators (which operate at fundamental but don't publish this term explicitly), TCXO, VCXO, OCXO (which integrate the oscillator circuit)."
},
"package": {
"type": ["object", "null"],
"additionalProperties": false,
"description": "Package physical characteristics. body_mm uses nested object shape (nested-object convention — inner keys align with base.schema.json body_mm shape).",
"required": ["evidence"],
"properties": {
"code": {
"type": ["string", "null"],
"description": "Datasheet package code (e.g. 'SMD-3225', 'SMD-2016', 'HC-49/US', 'SMD-5032'). 3225 = 3.2×2.5 mm, 2016 = 2.0×1.6 mm, etc."
},
"body_mm": {
"type": ["object", "null"],
"additionalProperties": false,
"description": "Package body dimensions in millimeters. Nested object using the nested-object convention. Inner keys (length/width/height) align with base.schema.json's body_mm shape.",
"properties": {
"length": {
"type": "number",
"description": "Body length in millimeters along the longest plan-view axis."
},
"width": {
"type": "number",
"description": "Body width in millimeters along the perpendicular-to-length axis."
},
"height": {
"type": "number",
"description": "Body height in millimeters (package thickness / standoff direction)."
}
}
},
"evidence": {
"$ref": "https://kicad-happy.local/datasheets/schemas/spec_value.schema.json#/properties/evidence"
}
}
}
}
}
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |