hashgraph-online/awesome-codex-plugins / plugins/aklofas/kicad-happy/skills/datasheets
datasheets
VerifiedExtract structured specifications from electronic component datasheet PDFs — pinouts, electrical characteristics, peripherals, topology, and features. Cache extractions per project for consumption by schematic and PCB analyzers. Primary consumer infrastructure for `kicad`, `emc`, `spice`, and `thermal` analyzers. Use this skill whenever the user asks to extract, verify, or read specs from a component datasheet; when analyzers need verified IC knowledge (EN pin thresholds, PG presence, USB peripheral speed); or when a review mentions datasheet coverage, extraction quality, or per-MPN specifications. Also triggers on "extract this datasheet", "what are the specs for MPN X", "verify datasheet extraction", or "check pin functions for part Y".
prompts/crystal.md
View on GitHub# Datasheet Crystal Extractor Subagent
You are extracting the **crystal category extension** (frequency, tolerances, stability, aging, equivalent circuit parameters, package) from an electronics component datasheet PDF.
## Task
Read `{{PDF_PATH}}` (focus pages: `{{PAGES}}`). Target MPN: **`{{MPN}}`**.
Produce a single JSON object matching this schema: `{{SCHEMA_PATH}}`.
## Field guide
- `crystal_type`: enum (required). Identifies the resonator technology:
- `"at_cut"` — standard AT-cut quartz crystal (most common for MHz-range consumer parts; ceramic-glass sealed SMD parts are typically AT-cut).
- `"ceramic_resonator"` — ceramic resonator (lower Q, wider frequency tolerance, lower cost; often labeled "ceramic resonator" or "CERALOCK").
- `"tcxo"` — temperature-compensated crystal oscillator (integrated oscillator; outputs a clock signal, not a two-terminal resonator).
- `"vcxo"` — voltage-controlled crystal oscillator (integrated oscillator with frequency tuning input).
- `"ocxo"` — oven-controlled crystal oscillator (highest stability; integrated oscillator with heater).
- If the datasheet says "ceramic glass sealed SMD crystal" without specifying cut, use `"at_cut"` (the dominant cut for MHz-range crystals).
- `frequency`: SpecValue list (unit: `"Hz"`). Nominal resonant frequency. **Convert from MHz/kHz to Hz** before storing. 12 MHz → `12000000`. 32.768 kHz → `32768`. Found on cover page or frequency/ordering table.
- `frequency_tolerance`: SpecValue list or null (unit: `"ppm"`). Initial frequency accuracy at +25°C. Symmetric tolerance stored as min/max (e.g. ±20 ppm → `min=-20, max=20`). Condition should note reference temperature (e.g. `"@ +25°C"`).
- `frequency_stability`: SpecValue list or null (unit: `"ppm"`). Frequency deviation over the operating temperature range, referenced to +25°C. Stored as min/max symmetric envelope (e.g. ±30 ppm → `min=-30, max=30`). Condition should state the temperature range (e.g. `"-40°C to +85°C, referenced to +25°C"`).
- `aging`: SpecValue list or null (unit: `"ppm"`). Long-term frequency drift. Stored as min/max symmetric envelope. Condition must note the time window (e.g. `"first year"` or `"per year"`). Typical value: ±3 to ±5 ppm for the first year. Do NOT add units suffix `/year` — use plain `"ppm"` unit with the time window in the condition.
- `load_capacitance`: SpecValue list or null (unit: `"F"`). **Convert pF to Farads.** 10 pF → `1e-11`. 12 pF → `1.2e-11`. 18 pF → `1.8e-11`. This is the capacitive load the oscillator circuit must present for the crystal to hit nominal frequency.
- `motional_capacitance`: SpecValue list or null (unit: `"F"`). C1 (series capacitance) in the Butterworth–Van Dyke equivalent circuit. Typically 1–3 femtofarads for AT-cut crystals (e.g. 2 fF → `2e-15`). Only AT-cut quartz datasheets routinely publish this. Set `null` when not on the datasheet — this is expected for ceramic resonators, TCXO, VCXO, OCXO.
- `motional_inductance`: SpecValue list or null (unit: `"H"`). L1 (series inductance) in the Butterworth–Van Dyke equivalent circuit. Typically millihenry to henry range for AT-cut crystals. Set `null` when not on the datasheet.
- `esr_max`: SpecValue list or null (unit: `"Ω"`). Equivalent series resistance maximum. This is a maximum spec — use the `max` field. Condition may specify frequency and load capacitance. Typical values: 20–150 Ω for standard crystals; higher for small packages or high-frequency overtone modes.
- `drive_level_max`: SpecValue list or null (unit: `"W"`). Maximum crystal excitation power. **Convert µW to Watts.** 100 µW → `1e-4`. 500 µW → `5e-4`. This is a maximum spec — use the `max` field. Exceeding drive level causes aging acceleration.
- `operating_temp_range`: SpecValue list or null (unit: `"°C"`). Operating temperature range as min/max. Commercial: 0/+70. Industrial: -40/+85. Automotive: -40/+125.
- `mode`: enum or null. Resonance mode of operation:
- `"fundamental"` — first overtone (most consumer crystals ≤30 MHz)
- `"overtone_3rd"` — third overtone (typically 30–100 MHz)
- `"overtone_5th"` — fifth overtone (higher frequencies)
- `null` for ceramic resonators, TCXO, VCXO, OCXO (the term is not meaningful for these)
- `package`: object or null. Physical package characteristics. `body_mm` uses nested `{length, width, height}` keys (no `_mm` suffix on inner fields):
- `code`: string or null. Datasheet package code (e.g. `"SMD-3225"`, `"SMD-2016"`, `"HC-49/US"`, `"SMD-5032"`). SMD-3225 = 3.2×2.5 mm plan view.
- `body_mm`: nested object with `length`, `width`, `height` (all numbers, in millimeters). Null when dimensions not published.
- `evidence`: evidence block (required).
## Hard rules
1. **Canonical SI units. No exceptions.** Frequency in **Hz** (NOT MHz/kHz). Capacitance in **F** (NOT pF). Resistance in **Ω**. Power in **W** (NOT µW). Aging in **ppm** (NOT ppm/year — put the time window in the condition). Tolerance/stability in **ppm**.
2. **Every SpecValue requires `evidence`** with `page` (1-based integer), `section` (string or null), `confidence` (`"high"`, `"medium"`, or `"low"`), `method` (one of `table`, `prose`, `curve`, `calculated`, `derived`).
3. **`motional_capacitance` and `motional_inductance` are expected null** for ceramic resonators, TCXO, VCXO, OCXO. Only AT-cut quartz datasheets routinely publish these. Do not guess.
4. **`mode` is null for ceramic resonators, TCXO, VCXO, OCXO.** Use `"fundamental"` for standard AT-cut crystals labeled as fundamental-mode. Use `"overtone_3rd"` or `"overtone_5th"` only when the datasheet explicitly states overtone operation.
5. **OMIT fields you cannot find** (leave as null). A null `motional_capacitance` is correct when the datasheet only provides ESR (R1) and shunt capacitance (C0).
6. **`body_mm` uses bare keys.** `length`, `width`, `height` — NOT `length_mm`, `width_mm`, `height_mm`.
## Output format
Return only the JSON object. No prose, no fences. Output must validate against `{{SCHEMA_PATH}}`.
Example (ABM8G-106-12.000MHZ-T — Abracon 12 MHz AT-cut fundamental SMD crystal, 3.2×2.5×1.0 mm):
```json
{
"crystal_type": "at_cut",
"frequency": [
{"min": null, "typ": 12000000.0, "max": null, "unit": "Hz",
"condition": "Frequency Range, fundamental-mode operation",
"notes": "Reported as 12.000 MHz; converted from MHz to Hz",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"frequency_tolerance": [
{"min": -20.0, "typ": null, "max": 20.0, "unit": "ppm",
"condition": "Frequency Tolerance @ +25°C",
"notes": "Reported as ±20 ppm",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"frequency_stability": [
{"min": -30.0, "typ": null, "max": 30.0, "unit": "ppm",
"condition": "Frequency Stability over -40°C to +85°C, ref +25°C",
"notes": "Reported as ±30 ppm",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"aging": [
{"min": -3.0, "typ": null, "max": 3.0, "unit": "ppm",
"condition": "Aging @ 25°C ±3°C, first year",
"notes": "±3 ppm/year first-year envelope",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"load_capacitance": [
{"min": null, "typ": 1e-11, "max": null, "unit": "F",
"condition": "Load capacitance (CL), typical",
"notes": "Reported as 10 pF; converted from pF to F (10e-12 = 1e-11)",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"motional_capacitance": null,
"motional_inductance": null,
"esr_max": [
{"min": null, "typ": null, "max": 120.0, "unit": "Ω",
"condition": "Equivalent series resistance (R1), maximum",
"notes": null,
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"drive_level_max": [
{"min": null, "typ": null, "max": 1e-4, "unit": "W",
"condition": "Drive Level, maximum",
"notes": "Reported as 100 µW; converted to W (100e-6 = 1e-4)",
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"operating_temp_range": [
{"min": -40.0, "typ": null, "max": 85.0, "unit": "°C",
"condition": "Operating Temperature Range",
"notes": null,
"evidence": {"page": 1, "section": "Key Electrical Specifications", "confidence": "high", "method": "table"}}
],
"mode": "fundamental",
"package": {
"code": "SMD-3225",
"body_mm": {"length": 3.2, "width": 2.5, "height": 1.0},
"evidence": {"page": 1, "section": "Package Dimensions", "confidence": "high", "method": "table"}
}
}
```
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| finishing-a-development-branchobra/superpowersUse when implementation is complete, all tests pass, and you need to decide how to integrate the work | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| systematic-debuggingobra/superpowersUse when encountering any bug, test failure, or unexpected behavior, before proposing fixes | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| test-driven-developmentobra/superpowersUse when implementing any feature or bugfix, before writing implementation code | Stars: 322k | Updated | Claude CodeCodex | Verified | Install |
| skill-creatoranthropics/skillsCreate new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. | Stars: 198k | Updated | Claude CodeCodex | Verified | Install |