Skip to content

Global-AI-Group-Inc/content-generation-skills / skills/mira-after-effects

mira-after-effects

Verified

Build motion pieces inside the user's own After Effects through the Mira MCP: read the project, mark the beat of the music, animate with the Mira Motion Kit (kinetic type, camera depth, velocity-matched transitions, expressions, grade) or ExtendScript, add plates, overlays, templates and sound, check contact sheets, render on the user's machine. Use it when the user says "build this in After Effects", "собери ролик в афтере", "промо в After Effects", "make a motion reel", "add grain and a LUT", or when adobe_status reports a connected After Effects. Requires the Mira for Adobe panel with the bridge switched on. NOT for generating clips (mira-generate) or Blender scenes (mira-blender-scene).

FileKindSize
SKILL.mdskill md9.5 KB
references/bank-schema.mdmarkdown2.9 KB
references/depth.mdmarkdown4.5 KB
references/doctrine.mdmarkdown5.2 KB
references/motion-kit.mdmarkdown16.5 KB
references/recipes.mdmarkdown7.1 KB
references/workflow.mdmarkdown5.3 KB

references/depth.md

View on GitHub
# Depth: making a stack of flat layers read as space

Read this when a scene has more than two planes, a camera move, or a single still that has to feel
deep. The numbers are starting points for 1920x1080 and 1080x1920; the frame you look at decides.

## One number per plane

Every plane gets one depth factor, and speed, size and haze all follow it. With the Kit's 3D route
(`parallax` with `depths`, then one `camera` move) After Effects does this for you: a plane at
depth z moves and shrinks by zoom / (zoom + z). On a 2D stack (no camera), apply the same factor by
hand to the position travel, the scale change and the amount of haze of each plane, or the eye sees
cut-out cards.

- Neighbouring planes differ in speed by two to four times. Closer than that they read as one
  layer; further apart they tear.
- The farthest plane barely moves or holds still: the sky is not on the dolly.
- A completely still stack looks like a postcard. A slow `expression wiggle` on the camera rig
  (about 1 per second, 1-2 px) keeps it breathing; never wiggle the planes one by one.

## Pushing in

A push into a 2D stack is not a position move. Scale the planes against each other instead: the
front plane grows to about 110-115 %, the back plane eases to about 90-95 %, over three to five
seconds. Zoom is perceived logarithmically, so ease it (`gentle` or `luxe`) rather than `linear`;
a linear scale reads as accelerating at the start and dead at the end. With a 3D camera, a `push`
of 20-30 % of the zoom does the same thing honestly.

## Air between the planes

- Haze only the far planes. Colour them toward the haze colour with Tint or Fill at a low amount,
  not with Opacity: opacity lets the plane behind show through and the stack goes muddy.
- Equal thin haze layers between planes (about 15 % each) add up to the right falloff on their own;
  there is no need to compute it.
- Lift the blacks of the far planes a little: distance never has true black.
- Desaturate with distance in steps, for example 0, -15, -30, -50 from front to back.
- The `atmosphere` recipe does all of this in one call: `layers` nearest first, `step` 0.15.

## Depth from a single still

When there is only one image, a displacement map made from it fakes the parallax:

- The map's neutral value is exactly 50 % grey (128): grey does not move, white comes forward,
  black goes back.
- Budget 15-30 px of displacement at 1080 px; more and edges smear.
- Blur the depth map a little before using it, or every hair and edge tears.
- The same map drives a depth of field (Camera Lens Blur with the map as the blur layer), the haze
  (as a luma matte for a haze solid) and a rack focus (animate the blur focal distance).

## Standing on the ground

Objects that should touch something need two shadows, not one:

- A contact shadow right under the object: tight (2-4 px blur), about 20 % opacity.
- An ambient shadow: wide (8-16 px blur), about 12 %.
- The `double_shadow` recipe lays both; on a busy floor raise the opacities until they read.

Lay a floor in perspective with CC Power Pin, not Corner Pin, so the texture keeps its perspective.
Light on a floor falls off: about a quarter darker for every doubling of distance from the source.

## Speed, motion blur and the cut

- The fastest plane should not move more than about composition width / (7 x fps) pixels per frame.
  Faster than that strobes even with motion blur; if the move must be faster, raise the shutter
  angle to 270-360 degrees on that composition.
- Scroll with Position, not with the Offset effect: Offset renders without motion blur.
- `motion_audit` flags fast moves that have no blur; fix them before the render.

## Making the planes belong together

- Light wrap on the subject: a blurred copy of the background behind it, Screen at 70-75 %, masked to
  a 5-10 px rim, so the background's light spills over its edge (`light_wrap`; for keyed footage pass
  the matte layer and `mode` luma).
- One grain pass over the whole stack (`grade` with `grain`), never a different grain per plane.
- One lens for the whole scene: one field of view, and chromatic aberration only in the corners,
  about 0.5-0.75 % of the width (`fx chromatic` on the final adjustment layer).

## Vertical (9:16) budgets

- Sideways parallax stays small: about 16 px of travel. Vertical travel can go to about 55-60 px.
- Put the horizon on a third: about y 640 or y 1280 in a 1920-high frame, never in the middle.
- Keep the depth anchors (the subject, the closest plane's focal point) inside the central
  900 x 1400 core: the platform's buttons and captions eat the rest (`safe_zone`).
reverse-engineer-anythingmorluto/reaReverse engineer native, managed, Electron/JavaScript, packaged, firmware, and browser targets with REA, and build agent environments (AgentEnv bundles) of web applications from a live instance or a capture, and of Linux desktop apps with a task from a request. Use shipped-artifact or requested runtime evidence to explain features, compare versions, decompile code, or guide a reconstruction. Skip REA for ordinary source-repository architecture analysis.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
diagnosing-superpowersobra/superpowersUse when a superpowers session went wrong and your human partner wants to know why — repeated work, ignored plans, stumbles, poor results, a skill that didn't fire, "it took too long", "why is it so expensive", "what is it doing" — or wants to build a bug report for the superpowers maintainers, for the current session or a past one identified by id or path, on any harness.Stars: 323kUpdated Claude CodeCodexVerifiedInstall
dispatching-parallel-agentsobra/superpowersUse when facing 2+ independent tasks that can be worked on without shared state or sequential dependenciesStars: 323kUpdated Claude CodeCodexVerifiedInstall
executing-plansobra/superpowersUse when executing an implementation plan in the current session as the implementer yourself — your human partner chose inline execution, or no subagent tool is availableStars: 323kUpdated Claude CodeCodexVerifiedInstall