Echo-aloha/asphalt-codex-skills-5 / skills/pfc-rutting-test
pfc-rutting-test
VerifiedDesign, implement, and audit PFC3D 5.0 asphalt wheel-tracking and intersection-rutting simulations using RVE-to-strip-to-full-size scaling, PFC5-compatible vector reaction control, Burger-calibrated contacts, vertical-horizontal coupled loads, rut/shear histories, edition-specific metrics, and explicit surrogate validation.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 9.5 KB |
| agents/openai.yaml | config | 320 B |
| dependencies.json | config | 449 B |
| references/jtg-t0719.md | markdown | 3.6 KB |
| references/modeling-strategy.md | markdown | 6.3 KB |
| references/overview.md | markdown | 5.2 KB |
| scripts/rutting_contact_pilot.p3dat | other | 1.4 KB |
references/overview.md
View on GitHub# JTG 3410-2025 T 0719 车辙试验与 PFC3D 映射
本文件按 JTG 3410-2025 T 0719-2025(印刷页 441-445)建立模型契约,不替代
规范原文,也不分发完整仪器参数、允许误差或验收限值表。JTG E20-2011 数值不得
作为当前模型默认值。
## 1. 当前方法定位
T 0719-2025 以往返橡胶轮测定沥青混合料试件动稳定度,评价高温性能。当前
方法链至少包括:
- 室内轮碾成型试件追溯 T 0703;现场切割试件追溯 T 0701 和取样记录;
- 记录试件密度、空隙率、制作方法和方向;
- 锁定试验温度、标准荷载、轮胎/轮迹、计数和调温条件;
- 输出原始变形-行走次数曲线,再计算动稳定度和车辙深度。
固定循环压头、加速时间映射或缩尺试件是 DEM 替代路线,不是 T 0719 的规范
车轮运动;必须通过移动轮 strip pilot 建立等效关系。
交叉路口制动/启动的竖—水平耦合荷载属于研究扩展,不是 T 0719 指标的一部分。
同一算例可以同时输出规范对标量和交叉口诊断量,但两条结果链必须分开命名、
分开校核。
## 2. 试件与计数契约
- 当前方法允许标准宽度室内成型试件和较窄的现场切割试件;宽度会进入动稳定度
系数。尺寸、厚度和来源逐项记录,不再把某个历史尺寸硬编码为唯一试件。
- “行走次数”、单程、往返、实验分钟和 PFC solver cycle 是五个不同量。当前
方法的设备计数与实际单程/往返关系必须按锁定装置核对并写入 CSV 元数据。
- 提前达到终止变形时,终点计数和向前回溯的评价区间按当前方法处理;不能继续
套用旧版 `45 min/60 min` 简写。
建议原始输出:
```text
physical_time, solver_cycle, one_way_pass, round_trip,
wheel_x, wheel_z, commanded_load, measured_reaction,
reaction_error, deformation_p1, deformation_p2, deformation_p3,
deformation_p4, deformation_p5, deformation_p6, deformation_p7,
mean_deformation, specimen_temperature
```
交叉口扩展至少追加:
```text
commanded_vertical_load, measured_vertical_reaction, vertical_reaction_error,
commanded_horizontal_load, measured_horizontal_reaction, horizontal_reaction_error,
forward_face_deformation, reverse_face_deformation, lateral_heave,
time_scale_lambda, equivalent_physical_time, surrogate_route
```
## 3. 变形测量映射
实验在一次往返过程中于轮迹中部及两侧多个固定位置采集变形,并以水平平均值
作为该次变形。PFC3D 至少实现以下两级结果:
1. 与实验固定位置相对应的七点或经批准的等效测点;
2. 轮迹带的连续场统计(最深点、稳健分位数、横向隆起)。
七点平均是规范对标量,连续场统计是模型诊断量,两者不得混为同一“车辙深度”。
测点随轮运动还是固定于试件、采样在前进还是返回行程、自由表面基准如何更新,
都必须锁定。
## 4. 当前指标实现
按当前方法,将两个评价行走次数记为 `t1`、`t2`,对应平均变形为 `d1`、`d2`,
试件宽度系数为 `C1`:
```text
DS = C1 * (t2 - t1) / (d2 - d1)
```
实现时必须:
- 从当前方法读取正常终止和提前终止时的 `t1/t2` 选择规则;
- 对 `d2 <= d1`、传感器分辨率、舍入、异常点和提前终止给出显式状态;
- 保留宽度系数来源,不使用没有当前依据的额外机器/试件系数;
- 将当前方法的车辙深度参考次数与动稳定度区间分开计算;
- 分别交付原始测点、平均变形、DS 和车辙深度。
## 5. PFC3D 实现门槛
1. **空载运动**:轮中心线、行程、反转、平移/滚动符号和 facet 分辨率通过。
2. **接触与载荷**:压强只用于定义物理目标;PFC 通过运动/伺服得到反力,并
记录整个行程的反力误差和离散接触足迹。
3. **温度**:试件和轮的温度输入分开记录;Burger 参数来自同温度下标定。
4. **测量**:预载参考面、固定测点、连续轮迹带和横向隆起都可重建。
5. **层级**:RVE 验证材料,strip pilot 验证运动/反力/测量,全尺寸模型只在
前两级通过后运行。
6. **重复性**:实验试件组与 DEM seeds 分开;模型重复不能代替实验异常值规则。
7. **耦合荷载**:外部水平需求、轮面摩擦和材料接触摩擦分开记录;同时验证
竖/水平反力、滑移和做功。
8. **剪应力**:输出坐标系、张量分量、符号、measure 区域和体积加权规则;
不把不同分量绝对值的混合平均称为同一剪应力。
9. **边界**:交叉口研究至少比较自由侧向与受限/代表性边界,避免把边界放流
造成的颗粒迁移直接解释为现场车辙。
## 6. 报告边界
报告标准版次和 T 0719-2025、试件来源/制作、密度/空隙率、温度、轮/载荷、
计数约定、测点协议、原始曲线、DS、车辙深度、重复性和所有 DEM 等效项。
项目验收阈值来自设计/施工/合同文件,不由 T 0719 试验方法或本 Skill 自动提供。
等效静载、时间压缩和耦合水平荷载的验证结果单列为研究证据,不改变 T 0719
规范指标的定义。
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |