Skip to content

Echo-aloha/asphalt-codex-skills-5 / skills/pfc-rutting-test

pfc-rutting-test

Verified

Design, implement, and audit PFC3D 5.0 asphalt wheel-tracking and intersection-rutting simulations using RVE-to-strip-to-full-size scaling, PFC5-compatible vector reaction control, Burger-calibrated contacts, vertical-horizontal coupled loads, rut/shear histories, edition-specific metrics, and explicit surrogate validation.

references/jtg-t0719.md

View on GitHub
# 车辙试验标准输入门槛

交通运输部公告确认,JTG 3410-2025 自 2025-10-01 实施,JTG E20-2011 同时
废止。本参考不分发标准尺寸、荷载、频率、温度、时段、系数或技术要求表;这些
数值必须由用户从合法取得的适用版次中提供并接受人工复核。历史复现必须明确标记
“历史版次”,不得作为当前项目的默认规范输入。

官方版本依据:交通运输部
[2025 年第 27 号公告](https://xxgk.mot.gov.cn/jigou/glj/202508/t20250822_4175218.html)。

当前方法已核对为 `T 0719-2025`。室内轮碾试件应追溯 T 0703;现场切割试件
应追溯 T 0701 和取样方向。方法输入不只包含试件/轮/温度,还必须包含计数约定、
固定测点协议和宽度系数来源。

## 来源绑定

- ledger: `../../pfc5-asphalt-workflow/references/standards-source-ledger.json`
- source_id: `user-supplied-licensed-copy:jtg-3410-2025`
- source_sha256: `1B57C826AE26397C85C76497BF4724D7E53DD20BFC4C3F6E988F2E85A3B33A6F`
- method_id: `T 0719-2025`
- printed_pages_reviewed: `441-445`

该绑定用于追踪本文采用的轮碾次数和测点声明,不代替项目人工确认适用版本。

## 必填参数清单

```yaml
standard:
  designation: <例如 JTG 3410-2025>
  method: <条款/方法编号>
  source: <合法副本或官方链接>
  reviewed_by: <人工复核人>
specimen:
  length: <value unit>
  width: <value unit>
  thickness: <value unit>
  preparation: <method>
conditioning:
  temperature: <value unit>
  duration: <value unit>
wheel:
  geometry: <diameter/width/profile>
  control_mode: <force/pressure/displacement>
  target: <value unit>
motion:
  frequency_or_speed: <value unit>
  stroke_or_path: <value unit>
  duration_or_cycles: <value unit>
  one_way_pass_definition: <definition>
  round_trip_definition: <definition>
evaluation:
  sampling_times: [<value unit>, <value unit>]
  sampling_passes: [<count>, <count>]
  measurement_points: <seven fixed positions or approved equivalent>
  width_coefficient: <value and source>
  stop_conditions: <conditions>
```

## 指标实现

T 0719-2025 以行走次数而非 solver cycle 组织动稳定度区间。正常完成时核对
`t1=1890`、`t2=2520`(设备边界计数按适用条文处理);提前达到终止变形时,
以终点为 `t2` 并向前取规定的 630 次区间。对应平均变形为 `d1`、`d2`,试件
宽度系数为 `C1`:

```text
DS = C1 * (t2 - t1) / (d2 - d1)
```

必须显式处理 `d2 <= d1`、传感器分辨率、提前终止、单位换算和宽度系数。
当前方法的车辙深度使用终点附近与初始规定次数之间的变形差,应与 DS 区间分开
实现。合格阈值来自项目采用的设计/施工/合同文件,不在 Skill 中硬编码。

## PFC 映射审计

- 试件几何、边界约束和轮迹路径逐项对应输入清单;
- 轮—试件接触面积和控制模式经反力闭环验证,而非把名义压力直接当接触力;
- 七个固定位置的平均变形作为规范对标量;最深点、分位数和横向隆起只作为
  模型诊断量,除非项目另有批准;
- 温度对 Burger 参数的映射必须来自标定数据;
- 输出原始时间—位置—反力—变形历史,再由锁定版后处理计算指标;
- `../scripts/rutting_contact_pilot.p3dat` 只验证曲面轮接触与历史输出,不构成规范试验。
- 制动/启动水平荷载、固定等效压头和时间压缩属于研究扩展,不是 T 0719
  规定动作;其反力、边界、等效误差和剪应力诊断与规范 DS/车辙深度分链输出。
rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first.Stars: 194kUpdated Claude CodeCodexVerifiedInstall