Echo-aloha/asphalt-codex-skills-5 / skills/pfc-marshall-test
pfc-marshall-test
VerifiedAdapt and audit a PFC 5.0 asphalt Marshall stability/flow simulation using the external fistPkg26 dc.fis two-head controller as a starting skeleton; use for curved-head geometry, PFC5 wall/contact kinematics, load-deformation histories, peak stability, edition-specific flow processing, and validation against laboratory data.
| File | Kind | Size |
|---|---|---|
| SKILL.md | skill md | 6.0 KB |
| agents/openai.yaml | config | 332 B |
| dependencies.json | config | 378 B |
| references/jtg-3410-2025-t0709.md | markdown | 3.1 KB |
| references/jtg-t0709-note.md | markdown | 1.5 KB |
| references/overview.md | markdown | 4.6 KB |
| scripts/marshall_head_contact_pilot.p3dat | other | 1.3 KB |
references/jtg-t0709-note.md
View on GitHub# 旧版 JTG E20-2011 T0709 马歇尔核对清单
> JTG E20-2011 已于 2025-10-01 被 JTG 3410-2025 替代。本文件仅用于复现
> 旧项目,且未收录条款原文。新项目必须先核对 2025 版的方法编号和条款。
> 本文件不提供记忆性数值。
## 1. 需从 T0709 原文核对的量
- [ ] 标准马歇尔试件尺寸(直径 × 高度)
- [ ] 加载速率(压头下降速率)
- [ ] 试验温度与试件保温条件
- [ ] 稳定度 MS 的定义与读数单位(kN)
- [ ] 流值 FL 的定义与读数单位(0.1 mm)
- [ ] 马歇尔模数 T = MS / FL
- [ ] 试件高度非标准时的修正系数
## 2. 旧版流值修正来源门槛
DEM 直接输出的“峰值时压头位移”不是规范流值。复现旧项目时必须从该项目
实际采用的 JTG E20-2011 合法副本核对:
- [ ] 切线起点的确定方法(原点 / 预压修正点)
- [ ] 流值读数单位(0.1 mm)
- [ ] 修正的具体几何步骤
## 3. 与配合比设计的关系
马歇尔稳定度/流值用于**最佳油石比**确定(配合比设计),与体积指标(空隙率、VMA、VFA)配合使用。建模时马歇尔试验提供两个对标量:稳定度 MS、流值 FL。
## 4. 旧版复现交付门槛
- [ ] 记录合法来源、旧版条款和采用原因,但不把原文复制进公开 Skill。
- [ ] 明确旧版流值修正、试件高度修正和舍入规则。
- [ ] 与同版次室内马歇尔数据(MS、FL)建立对标记录。
- [ ] 与 `jtg-3410-2025-t0709.md` 的当前方法输出分开存放。
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics. | Stars: 472k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |