Skip to content

composio-community/nemoclaw-composio / .agents/skills/nemoclaw-user-configure-security

nemoclaw-user-configure-security

Verified

Presents a risk framework for every configurable security control in NemoClaw. Use when evaluating security posture, reviewing sandbox security defaults, or assessing control trade-offs. Trigger keywords - nemoclaw security best practices, sandbox security controls risk framework, nemoclaw credential storage, credentials.json, api key security, openclaw security controls, nemoclaw security boundary, prompt injection, tool access control.

FileKindSize
SKILL.mdskill md1.8 KB
references/best-practices.mdmarkdown37.3 KB
references/credential-storage.mdmarkdown4.0 KB
references/openclaw-controls.mdmarkdown5.9 KB

references/best-practices.md

View on GitHub
<!-- SPDX-FileCopyrightText: Copyright (c) 2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved. -->
<!-- SPDX-License-Identifier: Apache-2.0 -->
# Security Best Practices

NemoClaw ships with deny-by-default security controls across four layers: network, filesystem, process, and inference.
You can tune every control, but each change shifts the risk profile.
This page documents every configurable knob, its default, what it protects, the concrete risk of relaxing it, and a recommendation for common use cases.

For background on how the layers fit together, refer to How It Works (use the `nemoclaw-user-overview` skill).

<!-- TODO: uncomment after the OpenShell docs are published
:::{seealso}
OpenShell enforces the platform-level mechanisms that NemoClaw configures, including network namespace isolation, seccomp filters, SSRF protection, TLS termination, and gateway authentication.
For the full platform-level controls reference, see [OpenShell Security Best Practices](https://docs.nvidia.com/openshell/latest/security/best-practices.html).
:::
-->

## Protection Layers at a Glance

NemoClaw enforces security at four layers.
NemoClaw locks some when it creates the sandbox and requires a restart to change them.
You can hot-reload others while the sandbox runs.

The following diagram shows the default posture immediately after `nemoclaw onboard`, before you approve any endpoints or apply any presets.

```mermaid
flowchart TB
    subgraph HOST["Your Machine: default posture after nemoclaw onboard"]
        direction TB

        YOU["๐Ÿ‘ค Operator"]

        subgraph NC["NemoClaw + OpenShell"]
            direction TB

            subgraph SB["Sandbox: the agent's isolated world"]
                direction LR
                PROC["โš™๏ธ Process Layer<br/>Controls what the agent can execute"]
                FS["๐Ÿ“ Filesystem Layer<br/>Controls what the agent can read and write"]
                AGENT["๐Ÿค– Agent"]
            end

            subgraph GW["Gateway: the gatekeeper"]
                direction LR
                NET["๐ŸŒ Network Layer<br/>Controls where the agent can connect"]
                INF["๐Ÿง  Inference Layer<br/>Controls which AI models the agent can use"]
            end
        end
    end

    OUTSIDE["๐ŸŒ Outside World<br/>Internet ยท AI Providers ยท APIs"]

    AGENT -- "all requests" --> GW
    GW -- "approved only" --> OUTSIDE
    YOU -. "approve / deny" .-> GW

    classDef agent fill:#76b900,stroke:#5a8f00,color:#fff,stroke-width:2px,font-weight:bold
    classDef locked fill:#1a1a1a,stroke:#76b900,color:#fff,stroke-width:2px
    classDef hot fill:#333,stroke:#76b900,color:#e6f2cc,stroke-width:2px
    classDef external fill:#f5f5f5,stroke:#ccc,color:#1a1a1a,stroke-width:1px
    classDef operator fill:#fff,stroke:#76b900,color:#1a1a1a,stroke-width:2px,font-weight:bold

    class AGENT agent
    class PROC,FS locked
    class NET,INF hot
    class OUTSIDE external
    class YOU operator

    style HOST fill:none,stroke:#76b900,stroke-width:2px,color:#1a1a1a
    style NC fill:none,stroke:#76b900,stroke-width:1px,stroke-dasharray:5 5,color:#1a1a1a
    style SB fill:#f5faed,stroke:#76b900,stroke-width:2px,color:#1a1a1a
    style GW fill:#2a2a2a,stroke:#76b900,stroke-width:2px,color:#fff
```

:::{list-table}
:header-rows: 1
:widths: 20 30 20 30

* - Layer
  - What it protects
  - Enforcement point
  - Changeable at runtime

* - Network
  - Unauthorized outbound connections and data exfiltration.
  - OpenShell gateway
  - Yes. Use `openshell policy set` or operator approval.

* - Filesystem
  - System binary tampering, credential theft, config manipulation.
  - Landlock LSM + container mounts
  - No. Requires sandbox re-creation.

* - Process
  - Privilege escalation, fork bombs, syscall abuse.
  - Container runtime (Docker/K8s `securityContext`)
  - No. Requires sandbox re-creation.

* - Inference
  - Credential exposure, unauthorized model access, cost overruns.
  - OpenShell gateway
  - Yes. Use `openshell inference set`.

:::

## Network Controls

NemoClaw controls which hosts, ports, and HTTP methods the sandbox can reach, and lets operators approve or deny requests in real time.

<!-- OpenShell provides additional network enforcement mechanisms not covered here, including network namespace isolation, SSRF protection, TLS auto-detection and termination, and audit-vs-enforce modes.
See the [Network Controls](https://docs.nvidia.com/openshell/latest/security/best-practices.html#network-controls) section of the OpenShell Security Best Practices. -->

### Deny-by-Default Egress

The sandbox blocks all outbound connections unless you explicitly list the endpoint in the policy file `nemoclaw-blueprint/policies/openclaw-sandbox.yaml`.

| Aspect | Detail |
|---|---|
| Default | All egress denied. Only endpoints in the baseline policy can receive traffic. |
| What you can change | Add endpoints to the policy file (static) or with `openshell policy set` (dynamic). |
| Risk if relaxed | Each allowed endpoint is a potential data exfiltration path. The agent can send workspace content, credentials, or conversation history to any reachable host. |
| Recommendation | Add only endpoints the agent needs for its task. Prefer operator approval for one-off requests over permanently widening the baseline. |

### Binary-Scoped Endpoint Rules

Each network policy entry restricts which executables can reach the endpoint using the `binaries` field.

OpenShell identifies the calling binary by reading `/proc/<pid>/exe` (the kernel-trusted executable path, not `argv[0]`), walking the process tree for ancestor binaries, and computing a SHA256 hash of each binary on first use.
If someone replaces a binary while the sandbox runs, the hash mismatch triggers an immediate deny.

| Aspect | Detail |
|---|---|
| Default | Each endpoint restricts access to specific binaries. For example, the `github` preset restricts access so only `/usr/bin/gh` and `/usr/bin/git` can reach `github.com`. Binary paths support glob patterns (`*` matches one path component, `**` matches recursively). |
| What you can change | Add binaries to an endpoint entry, or omit the `binaries` field to allow any executable. |
| Risk if relaxed | Removing binary restrictions lets any process in the sandbox reach the endpoint. An agent could use `curl`, `wget`, or a Python script to exfiltrate data to an allowed host, bypassing the intended usage pattern. |
| Recommendation | Always scope endpoints to the binaries that need them. If the agent needs a host from a new binary, add that binary explicitly rather than removing the restriction. |

### Path-Scoped HTTP Rules

Endpoint rules restrict allowed HTTP methods and URL paths.

| Aspect | Detail |
|---|---|
| Default | Some endpoints allow GET and POST on `/**` (for example, `clawhub.ai`). Others restrict methods and paths to specific API routes (for example, `api.anthropic.com` allows POST only to inference paths). Read-only endpoints such as `docs.openclaw.ai` and `sentry.io` allow GET only. The `npm_registry` baseline entry and the `npm`/`pypi` presets are GET-only (plus HEAD for PyPI). |
| What you can change | Add methods (PUT, DELETE, PATCH) or restrict paths to specific prefixes. |
| Risk if relaxed | Allowing all methods on an API endpoint gives the agent write and delete access. For example, allowing DELETE on `api.github.com` lets the agent delete repositories. |
| Recommendation | Use GET-only rules for endpoints that the agent only reads. Add write methods only for endpoints where the agent must create or modify resources. Restrict paths to specific API routes when possible. |

### L4-Only vs L7 Inspection (`protocol` Field)

All sandbox egress goes through OpenShell's CONNECT proxy.
The `protocol` field on an endpoint controls whether the proxy also inspects individual HTTP requests inside the tunnel.

| Aspect | Detail |
|---|---|
| Default | Endpoints without a `protocol` field use L4-only enforcement: the proxy checks host, port, and binary identity, then relays the TCP stream without inspecting payloads. Setting `protocol: rest` enables L7 inspection: the proxy auto-detects and terminates TLS, then evaluates each HTTP request's method and path against the endpoint's `rules` or `access` preset. |
| What you can change | Add `protocol: rest` to an endpoint to enable per-request HTTP inspection. Use the `access` preset (`full`, `read-only`, `read-write`) or explicit `rules` to control allowed methods and paths. |
| Risk if relaxed | L4-only endpoints (no `protocol` field) allow the agent to send any data through the tunnel after the initial connection is permitted. The proxy cannot see or filter the HTTP method, path, or body. The `access: full` preset with `protocol: rest` enables inspection but allows all methods and paths, so it does not restrict what the agent can do at the HTTP level. |
| Recommendation | Use `protocol: rest` with specific `rules` for REST APIs where you want method and path control. Use `protocol: rest` with `access: read-only` for read-only endpoints. Omit `protocol` only for non-HTTP protocols (WebSocket, gRPC streaming) or endpoints that do not need HTTP inspection. |

### Operator Approval Flow

When the agent reaches an unlisted endpoint, OpenShell blocks the request and prompts the operator in the TUI.

| Aspect | Detail |
|---|---|
| Default | Enabled. The gateway blocks all unlisted endpoints and requires approval. |
| What you can change | The system merges approved endpoints into the sandbox's policy as a new durable revision. They persist across sandbox restarts within the same sandbox instance. However, when you destroy and recreate the sandbox (for example, by running `nemoclaw onboard`), the policy resets to the baseline defined in the blueprint. |
| Risk if relaxed | Approving an endpoint permanently widens the running sandbox's policy. If you approve a broad domain (such as a CDN that hosts arbitrary content), the agent can fetch anything from that domain until you destroy and recreate the sandbox. |
| Recommendation | Review each blocked request before approving. If you find yourself approving the same endpoint repeatedly, add it to the baseline policy with appropriate binary and path restrictions. To reset approved endpoints, destroy and recreate the sandbox. |

### Policy Presets

NemoClaw ships preset policy files in `nemoclaw-blueprint/policies/presets/` for common integrations.

| Preset | What it enables | Key risk |
|---|---|---|
| `brave` | Brave Search API. | Agent can issue search queries. |
| `brew` | Homebrew (Linuxbrew) package manager. | Allows installing arbitrary Homebrew packages, which may contain malicious code. |
| `discord` | Discord REST API, WebSocket gateway, CDN. | CDN endpoint (`cdn.discordapp.com`) allows GET to any path. WebSocket uses `access: full` (no inspection). |
| `github` | GitHub and GitHub REST API. | Gives agent read/write access to repositories and issues via `gh` and `git`. |
| `huggingface` | Hugging Face Hub (download-only) and inference router. | Allows downloading arbitrary models and datasets. POST is restricted to the inference router only. |
| `jira` | Atlassian Jira API. | Gives agent read/write access to project issues and comments. |
| `npm` | npm and Yarn registries (GET-only). | Allows installing arbitrary npm packages, which may contain malicious code. Publishing is blocked. |
| `outlook` | Microsoft 365, Outlook. | Gives agent access to email. |
| `pypi` | Python Package Index (GET and HEAD only). | Allows installing arbitrary Python packages, which may contain malicious code. Publishing is blocked. |
| `slack` | Slack API, Socket Mode, webhooks. | WebSocket uses `access: full`. Agent can post to any channel the bot token has access to. |
| `telegram` | Telegram Bot API. | Agent can send messages to any chat the bot token has access to. |

**Recommendation:** Apply presets only when the agent's task requires the integration. Review the preset's YAML file before applying to understand the endpoints, methods, and binary restrictions it adds.

## Filesystem Controls

NemoClaw restricts which paths the agent can read and write, protecting system binaries, configuration files, and gateway credentials.

<!-- OpenShell covers additional filesystem enforcement details, including `hard_requirement` compatibility mode for Landlock and policy path validation rules.
See the [Filesystem Controls](https://docs.nvidia.com/openshell/latest/security/best-practices.html#filesystem-controls) section of the OpenShell Security Best Practices. -->

### Read-Only System Paths

The container mounts system directories read-only to prevent the agent from modifying binaries, libraries, or configuration files.

| Aspect | Detail |
|---|---|
| Default | `/usr`, `/lib`, `/proc`, `/dev/urandom`, `/app`, `/etc`, `/var/log` are read-only. |
| What you can change | Add or remove paths in the `filesystem_policy.read_only` section of the policy file. |
| Risk if relaxed | Making `/usr` or `/lib` writable lets the agent replace system binaries (such as `curl` or `node`) with trojanized versions. Making `/etc` writable lets the agent modify DNS resolution, TLS trust stores, or user accounts. |
| Recommendation | Never make system paths writable. If the agent needs a writable location for generated files, use a subdirectory of `/sandbox`. |

### Read-Only `.openclaw` Config

The `/sandbox/.openclaw` directory contains the OpenClaw gateway configuration, including auth tokens and CORS settings.
The container mounts it read-only while writable agent state (plugins, agent data) lives in `/sandbox/.openclaw-data` through symlinks.

Multiple defense layers protect this directory:

- **DAC permissions.** Root owns the directory and `openclaw.json` with `chmod 444`, so the sandbox user cannot write to them.
- **Immutable flag.** The entrypoint applies `chattr +i` to the directory and all symlinks, preventing modification even if other controls fail.
- **Symlink validation.** At startup, the entrypoint verifies every symlink in `.openclaw` points to the expected `.openclaw-data` target. If any symlink points elsewhere, the container refuses to start.
- **Config integrity hash.** The build process pins a SHA256 hash of `openclaw.json`. The entrypoint verifies it at startup and refuses to start if the hash does not match.

| Aspect | Detail |
|---|---|
| Default | The container mounts `/sandbox/.openclaw` as read-only, root-owned, immutable, and integrity-verified at startup. `/sandbox/.openclaw-data` remains writable. |
| What you can change | Move `/sandbox/.openclaw` from `read_only` to `read_write` in the policy file. |
| Risk if relaxed | A writable `.openclaw` directory lets the agent modify its own gateway config: disabling CORS, changing auth tokens, or redirecting inference to an attacker-controlled endpoint. This is the single most dangerous filesystem change. |
| Recommendation | Never make `/sandbox/.openclaw` writable. |

### Writable Paths

The agent has read-write access to `/sandbox`, `/tmp`, and `/dev/null`.

| Aspect | Detail |
|---|---|
| Default | `/sandbox` (agent workspace), `/tmp` (temporary files), `/dev/null`. |
| What you can change | Add additional writable paths in `filesystem_policy.read_write`. |
| Risk if relaxed | Each additional writable path expands the agent's ability to persist data and potentially modify system behavior. Adding `/var` lets the agent write to log directories. Adding `/home` gives access to other user directories. |
| Recommendation | Keep writable paths to `/sandbox` and `/tmp`. If the agent needs a persistent working directory, create a subdirectory under `/sandbox`. |

### Landlock LSM Enforcement

Landlock is a Linux Security Module that enforces filesystem access rules at the kernel level.

| Aspect | Detail |
|---|---|
| Default | `compatibility: best_effort`. The entrypoint applies Landlock rules when the kernel supports them and silently skips them on older kernels. |
| What you can change | This is a NemoClaw default, not a user-facing knob. |
| Risk if relaxed | On kernels without Landlock support (pre-5.13), filesystem restrictions rely solely on container mount configuration, which is less granular. |
| Recommendation | Run on a kernel that supports Landlock (5.13+). Ubuntu 22.04 LTS and later include Landlock support. |

## Process Controls

NemoClaw limits the capabilities, user privileges, and resource quotas available to processes inside the sandbox.

<!-- OpenShell enforces additional process-level controls not covered here, including seccomp BPF socket domain filters and a specific enforcement application order (namespace entry, privilege drop, Landlock, seccomp).
See the [Process Controls](https://docs.nvidia.com/openshell/latest/security/best-practices.html#process-controls) section of the OpenShell Security Best Practices. -->

### Capability Drops

The entrypoint drops dangerous Linux capabilities from the bounding set at startup using `capsh`.
This limits what capabilities any child process (gateway, sandbox, agent) can ever acquire.

The entrypoint drops these capabilities: `cap_net_raw`, `cap_dac_override`, `cap_sys_chroot`, `cap_fsetid`, `cap_setfcap`, `cap_mknod`, `cap_audit_write`, `cap_net_bind_service`.
The entrypoint keeps these because it needs them for privilege separation using gosu: `cap_chown`, `cap_setuid`, `cap_setgid`, `cap_fowner`, `cap_kill`.

This is best-effort: if `capsh` is not available or `CAP_SETPCAP` is not in the bounding set, the entrypoint logs a warning and continues with the default capability set.
For additional protection, pass `--cap-drop=ALL` with `docker run` or Compose (see Sandbox Hardening (use the `nemoclaw-user-deploy-remote` skill)).

| Aspect | Detail |
|---|---|
| Default | The entrypoint drops dangerous capabilities at startup using `capsh`. Best-effort. |
| What you can change | When launching with `docker run` directly, pass `--cap-drop=ALL --cap-add=NET_BIND_SERVICE` for stricter enforcement. In the standard NemoClaw flow (with `nemoclaw onboard`), the entrypoint handles capability dropping automatically. |
| Risk if relaxed | `CAP_NET_RAW` allows raw socket access for network sniffing. `CAP_DAC_OVERRIDE` bypasses filesystem permission checks. Attackers can use `CAP_SYS_CHROOT` in container escape chains. If `capsh` is unavailable, the container runs with the default Docker capability set. |
| Recommendation | Run on an image that includes `capsh` (the NemoClaw image includes it through `libcap2-bin`). For defense-in-depth, also pass `--cap-drop=ALL` at the container runtime level. |

### Gateway Process Isolation

The OpenClaw gateway runs as a separate `gateway` user, not as the `sandbox` user that runs the agent.

| Aspect | Detail |
|---|---|
| Default | The entrypoint starts the gateway process using `gosu gateway`, isolating it from the agent's `sandbox` user. |
| What you can change | This is not a user-facing knob. The entrypoint enforces it when running as root. In non-root mode (when OpenShell sets `no-new-privileges`), gateway process isolation does not work because `gosu` cannot change users. |
| Risk if relaxed | If the gateway and agent run as the same user, the agent can kill the gateway process and restart it with a tampered configuration (the "fake-HOME" attack). |
| Recommendation | No action needed. The entrypoint handles this automatically. Be aware that non-root mode disables this isolation. |

### No New Privileges

The `no-new-privileges` flag prevents processes from gaining additional privileges through setuid binaries or capability inheritance.

| Aspect | Detail |
|---|---|
| Default | OpenShell sets `PR_SET_NO_NEW_PRIVS` using `prctl()` inside the sandbox process as part of the seccomp filter setup. The NemoClaw Compose example also shows the equivalent `security_opt: no-new-privileges:true` setting. |
| What you can change | OpenShell's seccomp path enforces this inside the sandbox. It is not a user-facing knob. |
| Risk if relaxed | Without this flag, a compromised process could execute a setuid binary to escalate to root inside the container, then attempt container escape techniques. |
| Recommendation | No action needed. OpenShell enforces this automatically when the sandbox network policy is active. This flag prevents `gosu` from switching users, so non-root mode disables gateway process isolation in the NemoClaw entrypoint. |

### Process Limit

A process limit caps the number of processes the sandbox user can spawn.
The entrypoint sets both soft and hard limits using `ulimit -u 512`.
This is best-effort: if the container runtime restricts `ulimit` modification, the entrypoint logs a security warning and continues without the limit.

| Aspect | Detail |
|---|---|
| Default | 512 processes (`ulimit -u 512`), best-effort. |
| What you can change | Increase or decrease the limit with `--ulimit nproc=N:N` in `docker run` or the `ulimits` section in Compose. The runtime-level ulimit takes precedence over the entrypoint's setting. |
| Risk if relaxed | Removing or raising the limit makes the sandbox vulnerable to fork-bomb attacks, where a runaway process spawns children until the host runs out of resources. If the entrypoint cannot set the limit (logs `[SECURITY] Could not set soft/hard nproc limit`), the container runs without process limits. |
| Recommendation | Keep the default at 512. If the agent runs workloads that spawn many child processes (such as parallel test runners), increase to 1024 and monitor host resource usage. If the entrypoint logs a warning about ulimit restrictions, set the limit through the container runtime instead. |

### Non-Root User

The sandbox runs agent processes as a dedicated `sandbox` user and group.
The entrypoint starts as root for privilege separation, then drops to the `sandbox` user for all agent commands.

| Aspect | Detail |
|---|---|
| Default | `run_as_user: sandbox`, `run_as_group: sandbox`. A separate `gateway` user runs the gateway process. |
| What you can change | Change the `process` section in the policy file to run as a different user. |
| Risk if relaxed | Running as `root` inside the container gives the agent access to modify any file in the container filesystem and increases the impact of container escape vulnerabilities. |
| Recommendation | Never run as root. Keep the `sandbox` user. |

### PATH Hardening

The entrypoint locks the `PATH` environment variable to system directories, preventing the agent from injecting malicious binaries into command resolution.

| Aspect | Detail |
|---|---|
| Default | The entrypoint sets `PATH` to `/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin` at startup. |
| What you can change | This is not a user-facing knob. The entrypoint enforces it. |
| Risk if relaxed | Without PATH hardening, the agent could create an executable named `curl` or `git` in a writable directory earlier in the PATH, intercepting commands run by the entrypoint or other processes. |
| Recommendation | No action needed. The entrypoint handles this automatically. |

### Build Toolchain Removal

The Dockerfile removes compilers and network probes from the runtime image.

| Aspect | Detail |
|---|---|
| Default | The Dockerfile purges `gcc`, `gcc-12`, `g++`, `g++-12`, `cpp`, `cpp-12`, `make`, `netcat-openbsd`, `netcat-traditional`, and `ncat` from the sandbox image. |
| What you can change | Modify the Dockerfile to keep these tools, or install them at runtime if package manager access is allowed. |
| Risk if relaxed | A compiler lets the agent build arbitrary native code, including kernel exploits or custom network tools. `netcat` enables arbitrary TCP connections that bypass HTTP-level policy enforcement. |
| Recommendation | Keep build tools removed. If the agent needs to compile code, run the build in a separate, purpose-built container and copy artifacts into the sandbox. |

### Image Digest Pinning

The blueprint references the sandbox image by an immutable `@sha256:` digest instead of a mutable tag such as `:latest`.
A registry compromise or accidental force-push cannot silently swap the sandbox image.

| Aspect | Detail |
|---|---|
| Default | `nemoclaw-blueprint/blueprint.yaml` pins the sandbox image by digest. A CI regression test blocks any mutable-tag reference from merging. |
| What you can change | Contributors bumping the sandbox image must update the digest in `blueprint.yaml`. Release tooling should rewrite the digest automatically. |
| Risk if relaxed | Reverting to a mutable tag (`:latest`) allows a registry-side change to replace the sandbox image without any blueprint update, which is a supply-chain risk. |
| Recommendation | Always reference the sandbox image by digest. If you build a custom image with `nemoclaw onboard --from`, the digest constraint does not apply to your local build. |

### Auth Profile Permissions

The entrypoint and migration flows enforce `chmod 600` on all `auth-profiles.json` files under `~/.openclaw`.
This prevents other users on the host from reading stored credentials.

| Aspect | Detail |
|---|---|
| Default | `600` permissions applied recursively at startup and after migration restores. |
| What you can change | This is not a user-facing knob. The entrypoint enforces it. |
| Risk if relaxed | Looser permissions let other users or processes on the host read provider API keys and tokens stored in auth profiles. |
| Recommendation | No action needed. If you see a `permission denied` error when reading auth profiles, verify that you are running as the same user who created them. |

## Gateway Authentication Controls

The OpenClaw gateway authenticates devices that connect to the Control UI dashboard.
NemoClaw hardens these defaults at image build time.

### Device Authentication

Device authentication requires each connecting device to go through a pairing flow before it can interact with the gateway.

| Aspect | Detail |
|---|---|
| Default | Enabled. The gateway requires device pairing for all connections. |
| What you can change | Set `NEMOCLAW_DISABLE_DEVICE_AUTH=1` as a Docker build argument to disable device authentication. This is a build-time setting baked into `openclaw.json` and verified by hash at startup. |
| Risk if relaxed | Disabling device auth allows any device on the network to connect to the gateway without proving identity. This is dangerous when combined with LAN-bind changes or cloudflared tunnels in remote deployments, resulting in an unauthenticated, publicly reachable dashboard. |
| Recommendation | Keep device auth enabled (the default). Only disable it for headless or development environments where no untrusted devices can reach the gateway. |

### Insecure Auth Derivation

The `allowInsecureAuth` setting controls whether the gateway permits non-HTTPS authentication.

| Aspect | Detail |
|---|---|
| Default | Derived from the `CHAT_UI_URL` scheme at build time. When the URL uses `http://` (local development), insecure auth is allowed. When it uses `https://` (remote or production), insecure auth is blocked. |
| What you can change | This is derived automatically from `CHAT_UI_URL`. Set `CHAT_UI_URL` to an `https://` URL to enforce secure auth. |
| Risk if relaxed | Allowing insecure auth over HTTPS defeats the purpose of TLS, because authentication tokens transit in cleartext. |
| Recommendation | Use `https://` for any deployment accessible beyond `localhost`. The default local URL (`http://127.0.0.1:18789`) correctly allows insecure auth for local development. |

### Auto-Pair Client Allowlist

The auto-pair watcher automatically approves device pairing requests from recognized clients, so you do not need to manually approve the Control UI.

| Aspect | Detail |
|---|---|
| Default | The watcher approves devices with `clientId` set to `openclaw-control-ui` or `clientMode` set to `webchat`. All other clients are rejected and logged. |
| What you can change | This is not a user-facing knob. The allowlist is defined in the entrypoint script. |
| Risk if relaxed | Approving all device types without validation lets rogue or unexpected clients pair with the gateway unchallenged. |
| Recommendation | No action needed. The entrypoint handles this automatically. If you see `[auto-pair] rejected unknown client=...` in the logs, investigate the source of the unexpected connection. |

### CLI Secret Redaction

The CLI automatically redacts secret patterns (API keys, bearer tokens, provider credentials) from command output and error messages before logging them.

| Aspect | Detail |
|---|---|
| Default | Enabled. The runner redacts secrets from stdout, stderr, and thrown error messages. |
| What you can change | This is not a user-facing knob. The CLI enforces it on all command output paths. |
| Risk if relaxed | Without redaction, secrets could appear in terminal scrollback, log files, or debug output shared in bug reports. |
| Recommendation | No action needed. If you share `nemoclaw debug` output, verify that no secrets appear in the collected diagnostics. |

### Memory Secret Scanner

The NemoClaw plugin blocks the agent from writing likely secrets (API keys, tokens, private keys) into persistent memory files.
The scanner intercepts Write, Edit, and similar tool calls targeting memory and workspace paths before they reach disk.

| Aspect | Detail |
|---|---|
| Default | Enabled. The plugin registers a `before_tool_call` hook that scans for 14 high-confidence secret patterns. |
| What it covers | `.openclaw-data/memory/`, `workspace/`, `agents/`, `skills/`, `hooks/`, and `MEMORY.md`. |
| What you can change | This is not a user-facing knob. The plugin enforces it automatically. |
| Risk if relaxed | Without scanning, the agent could persist API keys or tokens in memory files that survive across sessions and backups. |
| Recommendation | No action needed. If a write is blocked, the agent receives an actionable error listing the detected patterns. |

## Inference Controls

OpenShell routes all inference traffic through the gateway to isolate provider credentials from the sandbox.

### Routed Inference through `inference.local`

The OpenShell gateway intercepts all inference requests from the agent and routes them to the configured provider.
The agent never receives the provider API key.

| Aspect | Detail |
|---|---|
| Default | The agent talks to `inference.local`. The host owns the credential and upstream endpoint. |
| What you can change | You cannot configure this architecture. The system always enforces it. |
| Risk if bypassed | If the agent could reach an inference endpoint directly (by adding it to the network policy), it would need an API key. Since the sandbox does not contain credentials, this acts as defense-in-depth. However, adding an inference provider's host to the network policy without going through OpenShell routing could let the agent use a stolen or hardcoded key. |
| Recommendation | Do not add inference provider hosts (such as `api.openai.com` or `api.anthropic.com`) to the network policy. Use OpenShell inference routing instead. |

### Provider Trust Tiers

Different inference providers have different trust and cost profiles.

| Provider | Trust level | Cost risk | Data handling |
|---|---|---|---|
| NVIDIA Endpoints | High. Hosted on `build.nvidia.com`. | Pay-per-token with an API key. Unattended agents can accumulate cost. | NVIDIA infrastructure processes requests. |
| OpenAI | High. Commercial API. | Pay-per-token. Same cost risk as NVIDIA Endpoints. | Subject to OpenAI data policies. |
| Anthropic | High. Commercial API. | Pay-per-token. Same cost risk as NVIDIA Endpoints. | Subject to Anthropic data policies. |
| Google Gemini | High. Commercial API. | Pay-per-token. Same cost risk as NVIDIA Endpoints. | Subject to Google data policies. |
| Local Ollama | Self-hosted. No data leaves the machine. | No per-token cost. GPU/CPU resource cost. | Data stays local. |
| Custom compatible endpoint | Varies. Depends on the proxy or gateway. | Varies. | Depends on the endpoint operator. |

**Recommendation:** For sensitive workloads, use local Ollama to keep data on-premise. For general use, NVIDIA Endpoints provide a good balance of capability and trust. Review the data policies of any cloud provider you use.

### Experimental Providers

The `NEMOCLAW_EXPERIMENTAL=1` environment variable gates local NVIDIA NIM and local vLLM.

| Aspect | Detail |
|---|---|
| Default | Disabled. The onboarding wizard does not show these providers. |
| What you can change | Set `NEMOCLAW_EXPERIMENTAL=1` before running `nemoclaw onboard`. |
| Risk if relaxed | NemoClaw has not fully validated these providers. NIM requires a NIM-capable GPU. vLLM must already be running on `localhost:8000`. Misconfiguration can cause failed inference or unexpected behavior. |
| Recommendation | Use experimental providers only for evaluation. Do not rely on them for always-on assistants. |

## Posture Profiles

The following profiles describe how to configure NemoClaw for different use cases.
These are not separate policy files.
They provide guidance on which controls to keep tight or relax.

### Locked-Down (Default)

Use for always-on assistants with minimal external access.

- Keep all defaults. Do not add presets.
- Use operator approval for any endpoint the agent requests.
- Use NVIDIA Endpoints or local Ollama for inference.
- Monitor the TUI for unexpected network requests.

### Development

Use when the agent needs package registries, Docker Hub, or broader GitHub access during development tasks.

- Apply the `pypi` and `npm` presets for package installation.
- Keep binary restrictions on all presets.
- Review the agent's network activity periodically with `openshell term`.
- Use operator approval for any endpoint not covered by a preset.

### Integration Testing

Use when the agent talks to internal APIs or third-party services during testing.

- Add custom endpoint entries with tight path and method restrictions.
- Use `protocol: rest` for all HTTP APIs to maintain inspection.
- Use operator approval for unknown endpoints during test runs.
- Review and clean up the baseline policy after testing. Remove endpoints that are no longer needed.

## Common Mistakes

The following patterns weaken security without providing meaningful benefit.

| Mistake | Why it matters | What to do instead |
|---------|---------------|-------------------|
| Omitting `protocol: rest` on REST API endpoints | Endpoints without a `protocol` field use L4-only enforcement. The proxy allows the TCP stream through after checking host, port, and binary, but cannot see or filter individual HTTP requests. | Add `protocol: rest` with explicit `rules` to enable per-request method and path control on REST APIs. |
| Adding endpoints to the baseline policy for one-off requests | Adding an endpoint to the baseline policy makes it permanently reachable across all sandbox instances. | Use operator approval. Approved endpoints persist within the sandbox instance but reset when you destroy and recreate the sandbox. |
| Relying solely on the entrypoint for capability drops | The entrypoint drops dangerous capabilities using `capsh`, but this is best-effort. If `capsh` is unavailable or `CAP_SETPCAP` is not in the bounding set, the container runs with the default capability set. | Pass `--cap-drop=ALL` at the container runtime level as defense-in-depth. |
| Granting write access to `/sandbox/.openclaw` | This directory contains the OpenClaw gateway configuration. A writable `.openclaw` lets the agent modify auth tokens, disable CORS, or redirect inference routing. | Store agent-writable state in `/sandbox/.openclaw-data`. |
| Adding inference provider hosts to the network policy | Direct network access to an inference host bypasses credential isolation and usage tracking. | Use OpenShell inference routing instead of adding hosts like `api.openai.com` or `api.anthropic.com` to the network policy. |
| Disabling device auth for remote deployments | Without device auth, any device on the network can connect to the gateway without pairing. Combined with a cloudflared tunnel, this makes the dashboard publicly accessible and unauthenticated. | Keep `NEMOCLAW_DISABLE_DEVICE_AUTH` at its default (`0`). Only set it to `1` for local headless or development environments. |

## Known Limitations

| Limitation | Impact | Mitigation |
|-----------|--------|------------|
| `openclaw agent --local` bypasses gateway | Secret scanning, network policy, and inference auth are not enforced when the agent runs in local mode. | A runtime warning is emitted when `--local` is detected. Avoid `--local` for production workflows. A future OpenClaw-level hook will close this gap. |
| Direct filesystem writes bypass secret scanner | The scanner intercepts OpenClaw tool calls, not raw filesystem writes (e.g., `echo secret > file`). | Landlock restricts writable paths. The scanner is application-layer defense-in-depth, not a filesystem-level control. |
| Base64/hex-encoded secrets are not detected | Content-based regex scanning cannot detect encoded or obfuscated secrets. | Use environment variables or credential stores instead of writing secrets to files. |

## Related Topics

- Network Policies (use the `nemoclaw-user-reference` skill) for the full baseline policy reference.
- Customize the Network Policy (use the `nemoclaw-user-manage-policy` skill) for static and dynamic policy changes.
- Approve or Deny Network Requests (use the `nemoclaw-user-manage-policy` skill) for the operator approval flow.
- Sandbox Hardening (use the `nemoclaw-user-deploy-remote` skill) for container-level security measures.
- Inference Options (use the `nemoclaw-user-configure-inference` skill) for provider configuration details.
- How It Works (use the `nemoclaw-user-overview` skill) for the protection layer architecture.
<!-- - OpenShell [Security Best Practices](https://docs.nvidia.com/openshell/latest/security/best-practices.html) for the platform-level controls reference, including network namespace isolation, seccomp filters, SSRF protection, TLS termination, and gateway authentication. -->
rea-analysis-optimizationmorluto/reaOptimize REA providers and shared analysis workflows for agent context, latency, CPU, and memory while preserving correctness and Evidence. Use for analysis bottlenecks and cache or query design; CI/test-suite optimization belongs to rea-ci-tests-audit.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-ci-tests-auditmorluto/reaAudit REA CI and test suites for correctness, fixture drift, false passes, and measured performance; use for suite or workflow investigations and efficiency changes, rather than ordinary feature testing or a single test failure.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
rea-tool-designmorluto/reaAudit, investigate, design, or change REA investigation tools, CLI/MCP contracts, provider capabilities, and Evidence semantics.Stars: 472kUpdated Claude CodeCodexVerifiedInstall
ponytail-auditDietrichGebert/ponytailQuality audit of the whole repo: bugs, security, real load, missing tests, speed, and what to delete. Most important first.Stars: 194kUpdated Claude CodeCodexVerifiedInstall