Skip to content

avelikiy/great_cto / skills/build-speed

build-speed

Verified

Make a slow CI pipeline or build faster by measuring it first — per-step durations, the slowest step, a target — then one change at a time, re-measured the same way. Speed never comes from removing, skipping or weakening a check. Use when a build or CI is slow ("CI долго", "ускорь сборку", "гейт идёт 40 минут", "build takes forever"). Loaded by devops, ci-resolver.

FileKindSize
SKILL.mdskill md3.9 KB
---
name: build-speed
description: Make a slow CI pipeline or build faster by measuring it first — per-step durations, the slowest step, a target — then one change at a time, re-measured the same way. Speed never comes from removing, skipping or weakening a check. Use when a build or CI is slow ("CI долго", "ускорь сборку", "гейт идёт 40 минут", "build takes forever"). Loaded by devops, ci-resolver.
when_to_use: |
  Apply when:
  - the operator says a build, a test suite, a pipeline or a deploy is slow
  - you are adding a pipeline step and someone asks what it costs in minutes
  - a pipeline got slower and nobody knows when or why
  Do NOT apply to:
  - a red pipeline — make it green first (ci-resolver), then make it fast
  - application performance (latency, throughput) — that is performance-engineer
effort: low
allowed-tools: Read, Bash, Grep
---

# build-speed — measure, then change one thing, then measure the same way

A build is made faster by finding where the minutes go. Guessing goes to the step
that looks heavy; measuring goes to the step that is. On this repository's own gate
one step, `lib tests` run in a single worker, was 21–30 of 28–38 measured minutes:
75–80% of the gate. Eight workers took that step to 5 minutes; no cache would have.

## 1. Measure before anything changes

- **Per step, not in total.** The duration of each step from the CI log or the
  runner's API (`gh run view --json jobs`, the TAP `duration_ms`, timestamps
  around each step). A total says the build is slow; steps say where.
- **At least three runs** of unchanged code. Write down the range, not one number:
  a shared runner and a busy laptop both vary by a third.
- **Note the conditions.** Runner type, cores, cache state (cold or warm),
  concurrency flags. A measurement without its conditions cannot be repeated.

## 2. Pick one step and a target

The slowest step, unless a faster one runs on every commit and the slow one does
not. Write the target before the change: "`lib tests` from 21–30 min to under 10
min, same tests, same pass count". No target, no way to say the change worked.

## 3. Change one thing

Usual levers, in the order they usually pay:

| Lever | When it pays |
|---|---|
| Parallel workers | tests are independent and the machine has idle cores |
| Run only what changed (affected targets) | a monorepo, and the full set still runs before merge |
| Dependency and layer caches | install or image build is a large share of a step |
| Split a long job across runners | one job dominates and runners are cheap |
| Fix the slowest tests themselves | a few tests are most of the time (sort by duration) |

Parallel workers expose tests that share state: a database, a port, a temp path,
a global config. A test that fails only in parallel is a real finding: give each
worker its own resource. Never answer it by going back to one worker silently.

## 4. Re-measure the same way

Same method, same conditions, same number of runs. Report before, after, and the
pass count of both. If the pass count differs, the change is not a speed-up: it
dropped or broke tests.

## Forbidden

Speed bought by checking less is not speed. Never:

- skip, delete, `.only` or mark as allow-failure a test or a step;
- lower a threshold, a coverage floor or a timeout so a check passes sooner;
- move a check out of the path to merge or deploy ("run e2e nightly instead")
  without the operator's decision, written down with its risk;
- run fewer tests "because they never fail".

## Report

```
BUILD-SPEED <pipeline> @ <commit>
  step     : lib tests
  before   : 22–29 min (2 runs, 1 worker, 10-core host, CPU 80% idle)
  after    : 4.5–5.3 min (3 runs, 8 workers, same host)
  tests    : 4034 before, 4034 after, same pass count
  change   : ci-local.sh --jobs=8, lib tests only; root and board fixtures keep 2
```

A line you could not measure is `NOT MEASURED` with the reason.
writing-skillsobra/superpowersUse when creating new skills, editing existing skills, or verifying skills work before deploymentStars: 322kUpdated Claude CodeCodexVerifiedInstall
xlsxanthropics/skillsUse this skill any time a spreadsheet file is the primary input or output. This means any task where the user wants to: open, read, edit, or fix an existing .xlsx, .xlsm, .xltx, .csv, or .tsv file (e.g., adding columns, computing formulas, formatting, charting, cleaning messy data); create a new spreadsheet from scratch or from other data sources; or convert between tabular file formats. Trigger especially when the user references a spreadsheet file by name or path — even casually (like "the xlsx in my downloads") — and wants something done to it or produced from it. Also trigger for cleaning or restructuring messy tabular data files (malformed rows, misplaced headers, junk data) into proper spreadsheets. The deliverable must be a spreadsheet file. Do NOT trigger when the primary deliverable is a Word document, HTML report, standalone Python script, database pipeline, or Google Sheets API integration, even if tabular data is involved.Stars: 198kUpdated Claude CodeCodexVerifiedInstall
shipping-and-launchaddyosmani/agent-skillsPrepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy.Stars: 119kUpdated Claude CodeCodexVerifiedInstall
childhoodthedotmack/claude-memBabysit a shipped release after merge, publication, or deployment. Verify published packages, production behavior, installed plugins, and late CI or user reports until the observation window is clean; use babysit for PR readiness before release.Stars: 118kUpdated Claude CodeCodexVerifiedInstall