anbeime/skill / skills/machine-skill/machine-skill
machine
VerifiedTurn one line ("a turbofan jet engine", "a mechanical watch", "an LVAD heart pump") into a photoreal, physics based, interactive 3D simulation of that machine in a single HTML file, plus a 20 to 30 second film to post it. Real proportions in metres, real materials (PBR metals, paints, polymers, glass), studio lighting with soft shadows, moving parts driven by a small solver that computes real numbers (thrust, torque, rpm, flow, pressure, efficiency), and modes to explode it, cut it open with clean section caps, x-ray it, slow it down, label it and break it. Use this whenever someone asks to build, simulate, visualise, explain or "show how X works" for any machine, engine, mechanism, device, instrument or piece of hardware, wants an interactive 3D model or a cutaway, or wants a video of a machine for a post, even if they never say "simulation" or "three.js".
V2-IDEAS.md
View on GitHub# Ideas for a second launch
Version 1 shows one machine from one line. A second launch should show that the same skill does much more. Each idea below is a film beat and a feature.
## 1. More kinds of machine
- **Fluids and heat:** a Francis hydro turbine, a heat pump with its refrigerant cycle on a p-h chart, a nuclear PWR loop, a steam locomotive.
- **Precision:** an EUV scanner stage, a hard disk actuator, a camera autofocus module, a tourbillon.
- **Robots:** a 6 axis arm with inverse kinematics and real joint torques, a quadruped with its gait, a gripper with contact forces.
- **Vehicles:** an EV drive unit with an inverter, a helicopter rotor head with cyclic pitch, a landing gear retraction.
- **Biology and medicine:** an insulin pump, a ventilator, a dialysis filter, a prosthetic knee.
Film beat: the montage grows from 8 to 40 machines, each from a single line.
## 2. Process lines and factories
- One line in, a whole line out: "a line that bottles 30,000 cans an hour". Machines from this skill sit on a factory floor run by a discrete event simulation (the sibling factory skill).
- Click any station to drop into its machine at full detail, running at the rate the line feeds it.
- The bottleneck moves when you change a cycle time, and the machine that becomes the bottleneck visibly works harder.
Film beat: zoom from a factory to one machine to one part inside it, in one shot.
## 3. Systems of machines
- Machines that connect through their physics: a turbofan feeding a generator feeding a grid, a pump feeding a turbine, a gearbox between a motor and a load.
- Shared ports (shaft, pipe, wire) with matched units, so torque, flow and power pass from one solver to the next.
- Break one part and watch the failure travel through the system.
Film beat: "a 5 MW wind farm on a gusty day" and the grid frequency dips when one turbine trips.
## 4. Edit by chat
- Follow up lines change the machine in place: "make the fan 10 % bigger", "swap the titanium blades for carbon", "add a third spool".
- The solver reruns and the page shows a before and after: thrust, mass, fuel burn.
- A history strip of every version, each a single HTML file.
Film beat: three follow up lines, three versions side by side, the numbers diffing.
## 5. Physics comparisons
- Two or three machines on one set running the same duty: a turbofan against a turboprop against an open rotor at the same thrust, a V8 against an electric motor, a centrifugal pump against an axial one.
- One shared slider drives all of them; the hero becomes a small table of live numbers.
- A "why" overlay that points at the part responsible for each difference.
Film beat: "Which is more efficient at 30,000 ft?" and the answer is computed on screen.
## 6. From the page to the real world
- Export the geometry as STEP or GLB and the solver as a Python notebook, so an engineer can take the result further.
- Load a real CAD file (STEP, STL) and have Claude add the solver, the cutaway and the film around it.
- AR on a phone: put the machine on your desk at real size.
## 7. Film upgrades
- Vertical cuts for Reels and Shorts out of the same take (camera keys per aspect ratio).
- A narrated version: Claude writes the voice over from the solver's numbers.
- A "build log" film: the parts list, the equations and the review rounds as the machine assembles.
## What to measure
- Time from the line to the first good frame, and to the film.
- How many of 20 random machine lines pass the quality bar without a second prompt.
- Frame rate on a three year old laptop and on a phone.
Related skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| slack-gif-creatoranthropics/skillsKnowledge and utilities for creating animated GIFs optimized for Slack. Provides constraints, validation tools, and animation concepts. Use when users request animated GIFs for Slack like "make me a GIF of X doing Y for Slack." | Stars: 197k | Updated | Claude CodeCodex | Verified | Install |
| ponytailDietrichGebert/ponytailLazy senior dev mode for any coding task: the smallest change that fully solves it, and a reply a busy human understands in one read. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailHarvest every shortcut: comment into one debt ledger, so deferrals get tracked instead of forgotten. One-shot report. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |
| ponytail-debtDietrichGebert/ponytailList every `shortcut:` comment (and older `ponytail:` ones) as a debt ledger. One-shot report, changes nothing. Use for "ponytail debt", "what did ponytail defer", "list the shortcuts", /ponytail-debt. | Stars: 194k | Updated | Claude CodeCodex | Verified | Install |