Explore skills
Showing 37291–37320 of 77104 skills
Detect and validate GPU availability for MATLAB GPU computing. Use when the user can't use their GPU, or is setting up or selecting a GPU. Triggers on: gpuDevice, GPU setup, check GPU, GPU not found, GPU not working, can't use GPU, GPU not available, unable to find a supported GPU device, compatible GPU, canUseGPU, validateGPU.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexSpeed up local parfor, parfeval, or spmd by switching to a thread-based parallel pool. Trigger when a user describes slow or disappointing local parallel performance, even if they don't mention threads. Symptoms: parfor on a laptop/workstation is slower than expected or "only slightly faster than for"; parfor scales poorly with the number of workers; ticBytes/tocBytes, the Parallel Pool dashboard, mpiprofile, or system tools show large per-worker data transfer; large broadcast variables or sliced inputs make iterations slow; opening a process pool dominates a short workload; user mentions serialisation or data transfer overhead. Also trigger on any question about whether code or a function works on a thread pool. For non-pool MATLAB performance work (vectorisation, preallocation, profiling), defer to matlab-optimize-performance.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexDesign, select, and analyze waveforms for radar, sonar, and active sensing using the Phased Array System Toolbox. Covers LFM, NLFM, FMCW, phase-coded, CW, stepped FM, custom IQ, ambiguity functions, sidelobe reduction, and Doppler tolerance. Key objects: phased.LinearFMWaveform, phased.NonlinearFMWaveform, phased.CustomFMWaveform, phased.PhaseCodedWaveform, phased.FMCWWaveform, phased.SteppedFMWaveform, phased.MFSKWaveform, phased.RectangularWaveform, nlfmspec2freq, shapespectrum, ambgfun, pambgfun, sidelobelevel, legendreseq, mlseq, radarWaveformGenerator.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexImport raw data (CSV, XLSX, TXT, or MATLAB tables) into formats used by Sensor Fusion and Tracking Toolbox. Handles both ground truth trajectories and sensor detection data. For truth: builds trackingScenarioRecording, tuning timetable, truthlog, or converted table. For sensor data: builds task-oriented dataFormat structs (preferred) or objectDetection arrays (legacy). Use when importing flight logs, GPS logs, radar detections, IR measurements, lidar/camera bounding boxes, ADS-B data, AIS ship tracks, or any recorded data for use with trackers, filter tuning, or tracker evaluation.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexConfigure, simulate, debug, and analyze radarDataGenerator within radarScenario. Use for: interactively building radar detection scenarios from datasheets or performance requirements; diagnosing missed detections and configuration errors; interpreting sensor spherical, body, and scenario-frame outputs; deriving ReferenceRange from hardware specs via link budget; scan mode configuration (mechanical, electronic/AESA, hybrid); and validating simulation results against analytical predictions.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexConnect MATLAB to Databricks via Spark (Databricks Connect) or JDBC (Database Toolbox). Use when setting up the MATLAB Interface for Databricks, configuring authentication (OauthU2M, OauthM2M, PAT), creating Spark sessions with getDatabricksSession(), reading Unity Catalog tables with server-side filtering, creating JDBC connections with databricks.JDBCConnection or StandaloneJDBCConnection, connecting to SQL Warehouses, selecting JDBC drivers (Simba/OSS), or writing data back to Databricks. Triggers on: Databricks Connect, Spark from MATLAB, getDatabricksSession, .databrickscfg, databricks.JDBCConnection, StandaloneJDBCConnection, SQLWarehouse, Databricks JDBC, Databricks cluster, large table server-side filtering.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUnified skill for all MATLAB and Simulink report generation tasks. Covers report generation, PDF report, document generation, mlreportgen, Report Generator, template, TitlePage, Chapter, multipage HTML, HTMLPage, html-multipage, custom reporter, customizeReporter, template hole, page header, page border, company style package, branded reporters, buildTemplates, Simulink report, model documentation, slreportgen, block diagram report, model report, subsystem documentation, SystemDiagramFinder, SystemIO, ExecutionOrder, LookupTable, template style, page footer, TemplateSrc, report package, table variants, multiple HTML pages, PDF report generation, Word report, DOM API, FormalTable, BaseTable, Figure, FormalImage, Section.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexReads from, writes to, and manages relational databases using MATLAB Database Toolbox. Use when connecting to databases, reading data with sqlread or fetch, filtering with rowfilter, writing with sqlwrite, updating with sqlupdate, executing SQL statements, managing transactions with commit and rollback, mapping MATLAB classes to tables with ORM (Mappable, ormread, ormwrite, ormupdate), or performing any database operation from MATLAB. Triggers on: database, SQL, sqlread, sqlwrite, sqlupdate, fetch, execute, rowfilter, RowFilter, ORM, Mappable, ormread, ormwrite, ormupdate, orm2sql, transaction, commit, rollback, Database Toolbox, PostgreSQL, MySQL, SQLite, SQL Server, Oracle, database connection, database table, query database, insert data, update rows, delete rows, stored procedure, prepared statement, odbc, databaseConnectionOptions, datasource, data source, DSN, connection string, multithreaded, parallel.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse DuckDB from MATLAB via Database Toolbox (R2026a+) as a non-math operations engine on large tabular files (CSV/Parquet/JSON) and as a zero-config embedded database. Use when connecting to DuckDB, querying CSV, Parquet, and JSON files directly with SQL, reducing or profiling large data before MATLAB analysis, creating portable development databases, or installing DuckDB extensions. Triggers on: DuckDB, duckdb(), large CSV/Parquet/JSON, file too large for readtable, filter/aggregate at source, deduplicate, reduce before analysis, profile large file, persistent file import, analytical engine, SQL on CSV, SQL on Parquet, SQL on JSON, query CSV with SQL, query Parquet with SQL, run SQL on files, SQL queries on files, query files directly, SQL without database, in-process SQL.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexAnalyze AMS waveform data using Mixed-Signal Blockset utilities: phase noise measurement, clock jitter, anti-aliased resampling, timing measurements, lock time, INL/DNL, ADC/DAC calibration, HSpice import. Use when analyzing time-domain voltage from PLL/VCO/clock simulations, measuring phase noise from variable-step solver output, computing jitter, or resampling non-uniform data.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexS-parameters, insertion loss, fields, currents, mesh control, and solver selection for RF PCB performance validation. TRIGGER: user asks to compute S-parameters, analyze insertion/return loss, extract fields or currents, compare MoM vs FEM, or control mesh for any RF PCB component. Invoke BEFORE writing sparameters() or solver code — API is non-obvious. SKIP: designing or creating components (use the specific matlab-design-pcb-* skill), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexPDN DC voltage/current analysis, IR drop, design rule checking, and multi-net batch analysis on imported PCB layouts. TRIGGER: user asks about power integrity, PDN analysis, IR drop, voltage distribution, current density, power nets, or design rule checking on a PCB. Invoke BEFORE writing code — the PDN API chain is specialized and non-obvious. SKIP: importing a PCB file (use matlab-read-pcb-layout), EM field/S-parameter extraction (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), transmission line design (use matlab-design-pcb-transmission-line).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexBuild custom PCB structures with pcbComponent, shapes, Boolean ops, feeds, and multi-layer stackups for non-catalog geometries. TRIGGER: user asks to build, modify, or customize a pcbComponent — add/remove shapes, edit polygons, place feeds, add metal layers, cut slots, or create non-catalog RF structures. Also when modifying geometry of an existing catalog-designed component (e.g., adding pads, removing elements, editing vertices). Invoke BEFORE writing pcbComponent code — layer/shape/feed API is non-obvious. SKIP: designing catalog components like filters/couplers/txlines (use the specific matlab-design-pcb-* skill), material/stackup definition only (use matlab-manage-pcb-material), EM analysis (use matlab-analyze-em), importing PCB files (use matlab-read-pcb-layout).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexWilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexBandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexSpiral inductors, interdigital capacitors, baluns, resonators, phase shifters for impedance matching, DC blocking, and bias tees. TRIGGER: user asks to design or create a spiral inductor, interdigital capacitor, balun, resonator, phase shifter, or other passive RF component. Invoke BEFORE writing code — class names and property patterns are non-obvious. SKIP: filter design (use matlab-design-pcb-filter), coupler/splitter design (use matlab-design-pcb-coupler), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), material setup only (use matlab-manage-pcb-material).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexMicrostrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexExport conversation MATLAB code to a clean, runnable .m script. Use when asked to save or export session work. TRIGGER: user asks to save, export, or generate a script from the current session's MATLAB code. Also when asked for a reproducible script or clean version of what was run.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexCascade PCB components, add lumped elements, export Touchstone, and bridge to eye diagram or antenna array workflows. TRIGGER: user asks to cascade or connect multiple RF PCB components, add lumped R/L/C, export S-parameters to Touchstone, or combine PCB elements into a circuit. Invoke BEFORE writing pcbcascade or circuit code — cascade rules and port matching are non-obvious. SKIP: designing individual components (use the specific matlab-design-pcb-* skill), EM analysis of a single component (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), optimization (use matlab-optimize-pcb-design).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexDielectric substrates, metal conductors, multi-layer stackups, and loss models (FR4, Rogers, Teflon) for RF PCB simulation. TRIGGER: user asks to set up a substrate, define dielectric properties, create a stackup, select a PCB material (FR4, Rogers, Teflon, etc.), or configure metal conductors. Invoke BEFORE writing dielectric() or metal() code — the API for named vs custom materials differs significantly. SKIP: PCB layout assembly (use matlab-assemble-pcb-layout), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), importing a PCB file (use matlab-read-pcb-layout).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexModel a Phase-Locked Loop (PLL) IC from its datasheet or system specs using Mixed-Signal Blockset. Without this skill, agents universally select the wrong solver and produce non-functional PLL models — 100% of unguided attempts fail. Covers Integer-N, Fractional-N, Dual Modulus architectures, loop filter design, lock time optimization, VCO phase noise configuration, and msbPllArchitectures/msbPllFoundation block assembly. Use when: PLL modeling, frequency synthesizer design, phase noise simulation, lock time analysis, charge pump design, loop filter tuning, datasheet-to-model, Mixed-Signal Blockset PLL, msbPllArchitectures.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexVia modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexOptimize RF PCB dimensions for bandwidth, return loss, or area via patternsearch and surrogateopt with constraints. TRIGGER: user asks to optimize an RF PCB component for performance (bandwidth, return loss, insertion loss, area) or apply constraints to a design. Invoke BEFORE writing optimization code — RF PCB Toolbox has a built-in optimize() function that differs from generic fmincon/ga approaches. SKIP: designing a component from scratch without an optimization objective (use the specific matlab-design-pcb-* skill), EM analysis without optimization (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexImport Gerber, ODB++, Allegro .brd, .mcm files for PCB boards and IC packages. Inspect nets, layers, shapes, and stackups. TRIGGER: user asks to import, read, or open a PCB layout file. Gerber files use gerberRead or PCBReader; ODB++, Allegro .brd, .mcm, and native formats use pcbFileRead. Also when inspecting nets, layers, components, or stackups from an imported board. Invoke BEFORE writing import code — the query API (cadnet, cadnetList, componentList) is specialized. SKIP: EM analysis or S-parameter extraction (use matlab-analyze-em), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn), building custom geometry (use matlab-assemble-pcb-layout), material/stackup definition only (use matlab-manage-pcb-material).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexExport pcbComponent designs to Gerber files with RF connectors and fab service formatting for PCB manufacturing. TRIGGER: user asks to export a PCB design to Gerber, generate manufacturing files, or write out a pcbComponent for fabrication. Invoke BEFORE writing export code — gerberWrite signature (pcbComponent, connectors, filename) is non-obvious. SKIP: importing/reading PCB files (use matlab-read-pcb-layout), building PCB geometry (use matlab-assemble-pcb-layout), EM analysis (use matlab-analyze-em), material/stackup setup (use matlab-manage-pcb-material).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexComputes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU fusion, orbit propagation, NMEA streaming, or RINEX v4.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexEstablish MAVLink connections between MATLAB and PX4/ArduPilot autopilots. Use when connecting to a drone, flight controller, or autopilot via MAVLink protocol over UDP. Covers dialect setup, UDP transport, timer-based heartbeat, and client discovery. Use when: "connect to PX4", "MAVLink connection", "heartbeat", "ground control station", "GCS", "connect to ArduPilot", "drone communication", "mavlinkio", "SITL".
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexCreate and simulate UAV scenarios with terrain, buildings, platforms, and sensors using uavScenario. Use when building a UAV simulation, UAV simulator, or UAV scenario in MATLAB. Covers addMesh for terrain/building import, uavPlatform with updateMesh, uavSensor adaptor pattern for GPS/IMU, and the setup/advance simulation loop. Triggers on: uavScenario, UAV simulation, UAV simulator, multirotor simulation, quadrotor scenario, terrain import, building import, GPS sensor simulation.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexAnalyzes sensor configurations and creates inertial fusion filters in MATLAB Navigation Toolbox. Manages filter selection (imufilter, ahrsfilter, complementaryFilter, insfilterMARG, insfilterAsync, insfilterNonholonomic, insfilterErrorState, insEKF, insCF), construction, tuning, and fusion loops. Use when fusing IMU/AHRS/INS/GPS+IMU data, estimating orientation or pose, or choosing a filter. Do NOT use for vision-only SLAM, Simulink fusion, or IMU simulation.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodex