Showing 37351–37380 of 77200 skills
Reference for MATLAB audiostreamer (Audio Toolbox R2025a+). Without this skill, agents consistently default to legacy audioDeviceWriter/audioDeviceReader or base MATLAB sound(), producing less capable code. Use when writing code for audio playback, recording, full-duplex device I/O, real-time audio measurements, or audio I/O processing with callbacks. Also use when debugging audiostreamer errors, dropouts, or latency issues, or migrating from audioDeviceReader, audioDeviceWriter, audioPlayerRecorder, or audioplayer/audiorecorder.
zrwangems/dsh-zrwang-plugin
Design and implement real-time audio processing chains using Audio Toolbox streaming objects. Use when building frame-based audio processing loops, multiband filters, dynamic range control, parametric EQ, level metering, loudness metering, SPL metering, octave-band analysis, sample rate conversion, frequency-domain filtering (long impulse responses, custom filter banks), or audio chains in Simulink. Covers visualization (visualize method), interactive tuning (parameterTuner), MIDI control, and Audio Toolbox Simulink blocks. Use when the user says "real-time audio", "streaming audio", "audio filter", "compressor", "equalizer", "level meter", "loudness meter", "SPL meter", "octave bands", "crossover filter", "audio chain", "MIDI control", "convolution reverb", "impulse response streaming", "frequency-domain filter", or asks to process audio frame-by-frame.
zrwangems/dsh-zrwang-plugin
Guide authoring of Audio Toolbox plugins (audioPlugin, audioPluginSource) that pass validateAudioPlugin and generate deployable VST/AU code. Use when creating audio effect or generator plugins, writing classdef files inheriting from audioPlugin, or troubleshooting validateAudioPlugin failures.
zrwangems/dsh-zrwang-plugin
Translate NI-DAQmx C function signatures into correct calldaqlib MATLAB calls. Use when the user mentions calldaqlib, any DAQmx* C function name (DAQmxCfgSampClkTiming, DAQmxExportSignal, DAQmxSetStartTrigRetriggerable, DAQmxGetSampClkRate, etc.), or needs NI-DAQmx functionality not exposed by the daq object. Covers: projection rules (taskHandle implicit, output pointers become return values, buffer-size args, enum-as-string), multi-task semantics, start() clobber, device-level empty-daq workaround, dictionary returns, string getter placeholder, array getter placeholder. Trigger contexts: low-level DAQ, escape hatch, retriggerable acquisition, shared timebase, export signal, connect terminals, external sample clock, trigger configuration, NI driver, C function translation.
zrwangems/dsh-zrwang-plugin
Discover and connect to Bluetooth Low Energy (BLE) peripheral devices from MATLAB. Use this skill when the user wants to scan for BLE devices, connect to a BLE peripheral, read or write BLE characteristics, subscribe to notifications, or any task that requires a BLE connection as a prerequisite (e.g., read sensor data over BLE, monitor heart rate, log accelerometer, stream data from wearable, IoT device communication). Triggers on: BLE, Bluetooth Low Energy, blelist, ble device, BLE characteristic, GATT, service UUID, scan for devices, BLE sensor, subscribe notify, BLE read, BLE write, peripheral device, BLE connect, wireless sensor.
zrwangems/dsh-zrwang-plugin
Use when the user wants to use Arduino sensors or peripherals from MATLAB that are not directly supported by the MATLAB Support Package for Arduino Hardware. Triggers on requests to create, wrap, or expose a custom Arduino library to MATLAB. Also triggers on indirect questions like "How do I read humidity in MATLAB?" or "How do I display text on an LCD from MATLAB?" where the answer requires a custom Arduino add-on library. Covers: custom addon creation, third-party Arduino library integration, LibraryBase class, C++ header files, DependentLibraries, arduinoioaddons namespace, I2C/SPI/GPIO peripheral wrappers.
zrwangems/dsh-zrwang-plugin
Read BEFORE troubleshooting or enhancing camera image quality. Diagnoses and enhances image quality from cameras connected via Image Acquisition Toolbox or USB Webcams support package. Discovers camera capabilities at runtime, analyzes captured images for quality issues (brightness, contrast, sharpness, noise, color balance, backlighting), suggests hardware setting adjustments tailored to the specific camera, and applies Image Processing Toolbox enhancement functions. Use when a user wants to improve camera image quality, troubleshoot dark/blurry/noisy/grainy/ overexposed/washed out/color cast images, or optimize camera settings.
zrwangems/dsh-zrwang-plugin
Find and query PI assets using MATLAB's Industrial Communication Toolbox. Two paths: (1) direct PI tag lookup via piclient + tags when user provides a tag name or description (R2022a+), (2) Asset Framework navigation via afclient when user needs element/attribute hierarchy (R2026a+). Use when working with PI AF servers, PI Data Archive tags, asset hierarchies, element templates, attribute lookup, or historical data from OSIsoft PI systems.
zrwangems/dsh-zrwang-plugin
Use when importing or exporting vehicle data from/to log files (MDF/MF4/DAT, BLF, ASC/TXT), decoding CAN/CAN FD/LIN messages to signals via DBC, ARXML, or LDF databases, writing timetable data to MDF or BLF files, or calling blfread, blfinfo, blfwrite, mdfRead, mdfWrite, mdfCreate, mdfInfo, canSignalImport, canMessageImport, canMessageTimetable, canFDMessageTimetable, canSignalTimetable, or linMessageTimetable.
zrwangems/dsh-zrwang-plugin
Port MATLAB Data Acquisition Toolbox code from the discouraged (legacy) session-based interface (daq.createSession, addAnalogInputChannel, startBackground, DataAvailable listeners, queueOutputData, wait) to the recommended DataAcquisition interface (daq("ni"), addinput, start, ScansAvailableFcn, write, preload). Use when migrating legacy DAQ scripts, converting session-API calls, working with DataAcquisition objects, writing multi-feature DAQ scripts that combine triggers, callbacks, continuous acquisition, or analog output. Also use when a user says their DAQ script "used to work" or "errors on R20XX", since modernizing legacy session-API code is a frequent fix for those failures. Trigger keywords: daq, DAQ, NI, session interface, addtrigger, addclock, ScansAvailableFcn, ScansRequiredFcn, daq.createSession, addAnalogInputChannel, startBackground, queueOutputData, DataAvailable, evt.Data, evt.TimeStamps, wait(d), preload, discouraged, legacy, modernize, R2020a.
zrwangems/dsh-zrwang-plugin
Connect to and acquire images from cameras in MATLAB using Image Acquisition Toolbox. Use this skill when the user wants to: use a webcam, acquire images, capture video, stream from a camera, connect to a GigE Vision camera, preview live video, list available cameras, configure camera properties, use a CoaXPress frame grabber, or use a Camera Link frame grabber. Covers USB webcams, GigE Vision, USB3 Vision, CoaXPress, Camera Link, and GenICam-compliant cameras. Always prefer videoinput from Image Acquisition Toolbox over webcam support package or gigecam.
zrwangems/dsh-zrwang-plugin
Discover OPC UA servers, connect MATLAB clients, and browse/navigate server nodes using opcuaserverinfo, the Local Discovery Service (LDS), opcua, connect, setSecurityModel, certificate-trust functions, findNodeById, opcuanode, and Namespace/Children traversal. Use when finding OPC UA servers on the network, querying endpoints and security policies, connecting to a server, authenticating with username/password or certificates, configuring security modes, handling certificate-trust or hostname-mismatch errors, troubleshooting failed connections or empty discovery, inspecting an OPC UA certificate (.der/.pem), browsing an address space, finding nodes by name or NodeId, navigating node hierarchies, invoking method nodes, or batch-processing large namespaces. Trigger on: opcuaserverinfo, LDS, opcua, opc.ua.Client, setSecurityModel, opc.ua.trustServerCertificate, OPC UA certificate, findNodeById, opcuanode, browse OPC UA, find node, OPC UA namespace, OPC UA method node, Industrial Communication Toolbox.
zrwangems/dsh-zrwang-plugin
Read BEFORE writing any code that adds Additive White Gaussian Noise (AWGN) to signals and converts between SNR, Eb/No, Es/No, and per-subcarrier SNR for communications simulations, using awgn(), convertSNR(), berawgn(). The default MATLAB patterns for AWGN (e.g., 'measured' option, manual SNR formulas) produce subtly incorrect results. This skill specifies the correct calling conventions, required function usage, and critical anti-patterns that must be avoided.
zrwangems/dsh-zrwang-plugin
Read BEFORE writing any code that builds or simulates OFDM systems. The default MATLAB patterns for OFDM (e.g., direct ifft/fft, awgn with 0 dBW power, missing symOffset) produce subtly incorrect results — always use ofdmmod/ofdmdemod instead of direct IFFT/FFT. This skill specifies the correct calling conventions for ofdmmod, ofdmdemod, ofdmChannelResponse, ofdmEqualize, and critical anti-patterns that must be avoided. Use when building OFDM transmitters or receivers, allocating subcarriers and guard bands, inserting pilots, computing SNR for OFDM, configuring fading channels (Rayleigh/Rician), estimating and equalizing channels, implementing timing and frequency synchronization, adding LDPC coding, designing resource grids, or setting up OFDM link simulations.
zrwangems/dsh-zrwang-plugin
Smart triggered RF capture on NI USRP radios with Wireless Testbench — record only when a signal of interest appears, not continuously (triggered spectrum sensing). Use energy detection to capture when signal power rises above the noise floor, or preamble detection to cross-correlate against a known sequence (WLAN L-LTF, 5G NR PSS/SSS, LTE PSS, Zadoff-Chu, custom protocols) and capture only when that protocol's preamble is detected. Use when implementing triggered (wake-on-signal) capture or spectrum sensing, capturing protocol-based signals via cross-correlation, calibrating detection thresholds (plotDetectionSignals / plotThreshold), scanning frequency bands for activity, or building transmit-then-detect workflows.
zrwangems/dsh-zrwang-plugin
Generate 3GPP-compliant 5G NR downlink and uplink baseband waveforms. Use to create NR signals, test model (TM) waveforms, fixed reference channels (FRC), test and measurement (T&M) signals, or test vectors for conformance testing. Covers configuring data, control, and broadcast channels and signals: PDSCH, PUSCH, PDCCH, PUCCH, SRS, SSBurst, CSI-RS, DM-RS, PT-RS, CORESET, and BWP parameters including bandwidth, subcarrier spacing (SCS), modulation (QPSK, QAM), numerology, FR1, FR2, TDD, FDD, and multi-bandwidth-part setups. Use for signal generation, RF instrument playback, or IQ baseband synthesis. Requires 5G Toolbox.
zrwangems/dsh-zrwang-plugin
Generate Bluetooth Low Energy (BLE) PHY waveforms. Read BEFORE writing any BLE waveform code to avoid hallucinating API patterns. Covers bleWaveformGenerator, bleIdealReceiver, bleCTEIQSample, bleAngleEstimate, bluetoothTestWaveform for LE1M/LE2M/LE500K/LE125K. Bluetooth Toolbox R2022a+.
zrwangems/dsh-zrwang-plugin
Generate GNSS baseband waveforms (GPS, Galileo, NavIC) with physically realistic or user-specified channel impairments using the Satellite Communications Toolbox. Use when generating GPS L1 C/A, L1C, L2C, L5, Galileo E1, E1C, E5a, E5b, E5, or NavIC L5, S, L1 signals. Covers gpsWaveformGenerator, galileoWaveformGenerator, satelliteScenario, Doppler/delay from orbital dynamics or custom values, navigation data encoding with ephemeris, and RINEX integration. Triggers on: GPS waveform, Galileo waveform, NavIC waveform, GNSS signal, satellite scenario, GNSS simulation, receiver test signal, baseband GNSS, L-band satellite signal, navigation signal generation.
zrwangems/dsh-zrwang-plugin
Generate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.
zrwangems/dsh-zrwang-plugin
Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.
zrwangems/dsh-zrwang-plugin
Set up and run wireless network simulations using the Wireless Network Toolbox. Use this skill when creating system-level simulations with wirelessNetworkSimulator, adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference), configuring node mobility, logging events or IQ samples, visualizing traffic, scheduling actions during simulation, running parametric sweeps, writing PCAP files with pcapWriter or technology-specific PCAP writers, registering event callbacks on wireless nodes, accessing event data fields, or combining multiple capture/visualization tools in a simulation.
zrwangems/dsh-zrwang-plugin
Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.
zrwangems/dsh-zrwang-plugin
Optimize MATLAB code for better performance through vectorization, memory management, and profiling. Use when user requests optimization, mentions slow code, performance issues, speed improvements, or asks to make code faster or more efficient.
zrwangems/dsh-zrwang-plugin
Build interactive web applications using HTML/JavaScript interfaces with MATLAB computational backends via the uihtml component. Use when creating HTML-based MATLAB apps, JavaScript MATLAB interfaces, web UIs with MATLAB, interactive MATLAB GUIs, or when user mentions uihtml, HTML, JavaScript, web apps, or web interfaces.
zrwangems/dsh-zrwang-plugin
Generate beautiful, distinctive HTML/CSS/JS control panels for MATLAB uihtml components. 8 built-in styles (Clean, Material, Cosmic Dark, Neumorphic Dark, Dashboard Light, Midnight Gradient, Minimal Mono, Warm Dark) plus custom aesthetics. Produces production-grade UI with sliders, buttons, toggles, and panels. Use when building visually polished MATLAB app UIs with uihtml.
zrwangems/dsh-zrwang-plugin
Generate Simulink Test Sequence blocks and harnesses from EARS requirements. Use when asked to create a test case from a requirement, generate tests from a .slreqx file, or verify a Simulink model with requirement-based tests.
zrwangems/dsh-zrwang-plugin
Sets up the Polyspace Agentic Toolkit for any supported AI agent. Use when the user asks to "set up Polyspace", "set up the Polyspace Agentic Toolkit", "install the Polyspace MCP Server", "configure Polyspace for my agent", or wants to get Polyspace working with their AI application.
zrwangems/dsh-zrwang-plugin
Finds documentation for Polyspace checkers and coding rules. Use when the user asks "what does this checker do", "find checker documentation", "explain this Polyspace rule", or wants to understand a specific Polyspace finding.
zrwangems/dsh-zrwang-plugin
REQUIRED before searching for any Polyspace option documentation page. Use when the user asks about a Polyspace option (-c, -target, -sources, -boolean-types, -misra3, etc.), wants to find an option's doc page, or asks 'what does this option do'. This skill contains the only reliable method to locate option reference pages — URLs cannot be guessed from the flag name.
zrwangems/dsh-zrwang-plugin
Justifies Polyspace findings by adding annotation comments in the C/C++ source code. Use when the user asks to "add a Polyspace annotation", "justify a finding in the source/in code", "mark as false positive in the code", "suppress a finding with a comment", or wants an in-source justification the next analysis will read. For recording a review status in the results database instead, use polyspace-justify-in-database.
zrwangems/dsh-zrwang-plugin