Explore skills
Showing 35761–35790 of 77104 skills
Validate the climate forcing selected by an EcoSIM run namelist before simulation or when diagnosing weather-input failures. Checks the remaining run's forcing years, days and hours, NetCDF reader schema, missing values, units and broad physical ranges, and writes read-only readiness reports. Use for existing hourly or mixed daily/hourly EcoSIM forcing, including NLDAS and ERA5-derived files; conversion and gap filling belong to their source-data workflows.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexVerify EcoSIM evaluation-output coverage with an isolated one-year run. Use before model-data comparison or a full site run when observations need matching history variables, units, temporal/depth support and plant pools; also diagnose missing evaluation outputs. This checks output readiness, not model skill or a replacement for the two-year plant-trait smoke test.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexExtract typical annual GPP, annual evapotranspiration, mid-season LAI, mid-season root biomass, mid-season shoot biomass, median canopy height, maximum primary-root depth, Vcmax at 25oC, and Jmax at 25oC from EcoSIM h0 NetCDF output files. Use when asked to derive these EcoSIM output targets from a selected .ecosim.h0.*.nc file for model-output processing, trait checks, or benchmark summaries.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexApply and cross-validate Lange (2019) ISIMIP3BASD climate bias adjustment using tower or other measured reference data, then prepare EcoSIM forcing. Use for trend-preserving distribution correction of NLDAS, ERA5 or climate-model weather; distinguish published daily processing from an explicitly validated hourly adaptation.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexSort EcoSIM run folders for several sites into a project with per-site input and run directories, sourced site guides, and a project manifest. Use when asked to create EcoSIM run folders, runs, or cases for several sites at once, set up a multi-site EcoSIM project, or add, refresh, or summarize sites in such a project.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexPrepare, validate, and edit EcoSIM plant management inputs using pft_mgmt_in NetCDF, editable Excel workbooks, and optional PlantMgmtWriter.py JSON files. Use when creating or checking natural PFT management data, converting pft-mngt NetCDF to an Excel sheet for editing, converting edited Excel back to JSON or NetCDF, validating pft_type/pft_pltinfo/pft_mgmt entries, or preparing PlantMgmtWriter.py inputs for EcoSIM.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexExtract and update the EcoSIM output-variable catalog from Fortran history-field registration calls such as hist_addfld1d and hist_addfld2d. Use only when explicitly asked to update, regenerate, refresh, or rebuild the list of EcoSIM output variables from HistDataType.F90 or related F90 source; do not invoke for ordinary EcoSIM output analysis unless the variable list itself must be updated.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexEdit EcoSIM PFT-parameter NetCDF files such as ecosim_pftpar_20260303.nc with the ParEditor class from applications/notebooks/scripts/ParamEditor.py. Use when asked to modify, scale, copy, compare, or delete PFT parameter records for a plant functional type (six-character pfts code such as gr3s43 or ndlf34), update microbe parameter NetCDF values, or maintain the JSONL change log that records past parameter changes. Never modify plant_trait.*.desc files; they are read-only references.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexExtract one EcoSIM PFT parameter record from a PFT-parameter NetCDF file into a standalone NetCDF. Use when Codex needs to isolate all parameters for a given EcoSIM six-character PFT code such as ndlf34, or a four-character pfts_short value plus Koppen climate code, while preserving all non-PFT-specific variables such as pfts_short, pfts_long, and Koppen metadata.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexRead-only sanity-check of EcoSIM plant_trait.*.desc parameter values for the first grid. Use when validating plant trait description files, enforcing clean C3/C4 physiological parameterization, reviewing photosynthetic kinetics, active leaf/root protein allocation, and root hydraulics such as RSRR, RVSR, and ARSRA, or checking ranges, units, and woody/herbaceous block consistency before running EcoSIM. Never edit or replace the `.desc` file.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexSummarize an existing EcoSIM run folder by following its namelist inputs and explaining topography, hydrology and lateral water exchange, soil profiles, vegetation/PFTs, management, forcing coverage, and run controls. Use for questions about how a case is configured; this does not create, modify, or run the case.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexTrack and report progress of a request to create and run an EcoSIM case for a site ("create an ecosim run for site US-UMB", "set up and run EcoSIM at SITE"). Records four stages — data preparation, namelist creation, model simulation, and output evaluation — in result/SITE_ID/progress.json and PROGRESS.md, derives step status from files and quality reports on disk, and records manual results such as the executable, test run, and evaluation verdicts. Use at the start of such a request, after each stage, and whenever the user asks where a site run stands.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexPrepare, validate, inspect, and edit EcoSIM soil management inputs using soil_mgmt_in NetCDF, editable Excel workbooks, and optional JSON files. Use when checking fertilizer, tillage, or irrigation management data; converting soil-mngt NetCDF to Excel for editing; converting edited Excel back to JSON or NetCDF; decoding fertf/tillf/irrigf selector variables; or validating EcoSIM ReadManagementMod.F90 soil-management inputs.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexCorrect the PFT parameters selected by an existing EcoSIM namelist through isolated five-day simulations and plant_trait.desc checks. Use for iterative trait correction and parameter-file compatibility repair; history analysis and seasonal calibration are outside the default workflow.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexUse this skill when deriving EcoSIM plant trait parameter recommendations for a named plant from web and online literature evidence, using a read-only `plant_trait.*.desc` file and the `ndlf43` tree block or `gr3s43` grass block as the starting archetype. Never edit or replace the `.desc` file.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexMap observed site vegetation, species lists, land-cover descriptions, or plant management PFTs to EcoSIM vegetation codes using templates/ecosim_pftpar_20260303.nc.cdl. Use when choosing or validating EcoSIM pft_type values, pfts entries, pfts_short categories, pfts_long plant type meanings, or the combined short-code plus Koppen climate numerical code used by plant management inputs.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexDownload Copernicus CDS ERA5 single-level point time-series climate forcing for non-US or non-NLDAS EcoSIM sites from longitude/latitude coordinates. Use when a paper-derived site is outside the NLDAS domain, lacks AmeriFlux/FLUXNET curated forcing, or needs global ERA5 variables such as 2m temperature, dewpoint temperature, surface pressure, solar radiation, precipitation, and 10m wind components for EcoSIM preprocessing.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexEstimate calcium-normalized Gapon selectivity coefficients from paired exchange and solution chemistry, or initialize depth-explicit EcoSIM Gapon inputs from the closest bundled ecosystem template when paired chemistry is unavailable. Use when deriving or checking EcoSIM GKC4, GKCH, GKCA, GKCM, GKCN, or GKCK values; matching a target ecosystem, climate, vegetation, and management regime to a starting profile; remapping template values to target soil layers; or documenting that template-based values require calibration or tuning.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexDownload, screen, and map non-North-America auxiliary EcoSIM climate variables from global or regional atmospheric-chemistry data sources. Use when a non-US/non-NLDAS site needs annual EcoSIM precipitation chemistry variables such as PHRG, CN4RIG, CNORIG, CSORG, CCARG, CMGRG, CNARG, CKARG, or CCLRG; when deciding whether to use CAMS, EBAS, EANET, or MERRA-2; or when deriving site-specific auxiliary variables after ERA5 climate forcing has been prepared.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexUse this skill when you need to derive a Koppen-Geiger climate label from input latitude and longitude, then convert between the letter code such as `Csa` and the EcoSIM-style numeric code such as `34`.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexDownload NASA GES DISC NLDAS_FORA0125_H version 2.0 primary hourly forcing data for a point location. Use when Codex needs to retrieve NLDAS File A meteorological forcing from the GES DISC API or HTTPS archive for a longitude/latitude pair, including Earthdata username/password authentication, hourly URL generation, nearest-grid-point extraction, CSV output, or EcoSIM climate-forcing preprocessing.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexExtract study sites, observational variables, coordinates, climate-forcing sources, and cited data sources from ecosystem-modeling papers, PDFs, supplements, or article text, then plan or create EcoSIM simulation workflows and run folders for those sites. Use when Codex is asked to read a paper for EcoSIM feasibility, including requests phrased as "read paper for ecosim feasibility"; read a paper for sites/data availability; reproduce a published site simulation in EcoSIM; compare EcoSIM outputs to paper observations; or convert paper-derived AmeriFlux, FLUXNET, US NLDAS-domain, non-US ERA5, crop, peatland, forest, grassland, wetland, or unmanaged field-site information into EcoSIM inputs and runnable cases.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexBuild EcoSIM atmospheric greenhouse-gas forcing files by combining a historical monthly atmgas NetCDF with RCMIP/CMIP6 SSP concentration pathways. Use when Codex needs SSP245/SSP585 or other SSP atmospheric CO2, CH4, and N2O concentrations, key-year tables, or scenario NetCDF files spanning historical years through 2100 for EcoSIM or related biogeochemical forcing workflows.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexRun the combined AmeriFlux to EcoSIM extraction workflow for site metadata, NADP or tDEP atmospheric chemistry, gSSURGO soil data, and optional climate or grid NetCDF forcing. Use when building a complete site-specific EcoSIM input package.
bioepic-data/ecosim-agent
Stars: 3Claude CodeCodexCheck the health of a data table/asset using Monte Carlo. Activates on "how is table X", "check health of X", "is X healthy", "status of X", "check on X table", or any health/status question about a data asset.
monte-carlo-data/mc-agent-toolkit
Stars: 93Claude CodeCodex当用户想写或发布微信公众号文章时使用——他们给出零散思路、草稿或笔记,请你润色、生成题图和解释图,或准备上传到 mp.weixin.qq.com。触发词:"写一篇微信文章"、"公众号"、"润色"、"题图"、"发公众号"、"/wjs-publishing-wechat"。
jianshuo/claude-skills
Stars: 142Claude CodeCodexPOM 分层与 context 共享决策树。触发:架构、分层、POM、Page Object、基类设计、新增角色。
DanielSuo117/velocitai
Stars: 158Claude CodeCodex测试失败时免登跳转原地排查修复。触发:排查、纠错、debug、定位符失败、超时、元素找不到、断言失败。
DanielSuo117/velocitai
Stars: 158Claude CodeCodex隐式等待为主、显式等待仅慢路径。触发:等待策略、timeout、wait、隐式等待、显式等待。
DanielSuo117/velocitai
Stars: 158Claude CodeCodexGenerate and revise academic figures, data plots, or image slides through a configured PaperBanana backend; inspect their automated review status. Use for PaperBanana requests and academic image generation, not general presentation editing or code-only plotting.
PlutoLei/paperbanana-skill
Stars: 62Claude CodeCodex