Explore skills
Showing 50191–50220 of 71536 skills
Launch and control the MATLAB Radar Designer app programmatically via MCP. Use when designing radar systems, configuring parameters, comparing radar types, analyzing performance metrics, or managing radar design sessions.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexPerform time-frequency analysis in MATLAB using CWT, STFT, synchrosqueezing, reassignment, wavelet coherence, cross spectrogram, EMD/VMD, multiresolution analysis, and time-frequency filtering. Triggers on: time-frequency, spectrogram, scalogram, cwt, stft, istft, fsst, wsst, wcoherence, xspectrogram, modwt, modwtmra, modwpt, emd, vmd, hht, tffilt, dgt, gabor, instantaneous frequency, synchrosqueezing, reassignment, ridge extraction, wavelet coherence, cross spectrum, mode decomposition, signal decomposition, time-frequency filtering.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexDiscover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexDiscovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed. Does NOT connect to, configure, or acquire data from devices — defers to device-specific skills for usage workflows.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors. (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexConfigure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model for production/ECU deployment or rapid-prototyping code, target ARM or x86 hardware, apply a MISRA C/C++ code-generation profile (ERT/AUTOSAR only, not GRT), or set up GRT, ERT, AUTOSAR, or shared-library targets. Handles target selection, hardware mapping, model hierarchy propagation, and optional support-flag introspection. Do NOT use for GRT shared-library variants (grt_malloc.tlc), DDS, or ROS. Do NOT use for Simulink Real-Time/Speedgoat targets (simulink-configure-real-time-model), Classic AUTOSAR component mapping/ports/runnables/ARXML authoring (simulink-author-classic-autosar-swc), auditing a model against MISRA guidelines (checking-model-compliance), or iterative optimization of existing generated code (simulink-optimizing-embedded-code).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexRoutes Embedded Coder workflows for Simulink models. Use when asked to optimize or improve generated code, reduce code metrics, author Code Replacement Libraries, or improve Embedded Coder output. Targets: execution time, memory (RAM, ROM, stack), code size, MISRA compliance. Works iteratively with measurement, gating, and rollback. Triggers: optimize generated code, reduce runtime, shrink code size, improve code efficiency, reduce memory, speed up generated code, MISRA compliance, author CRL. CAUTION: Do NOT optimize generated code without this skill — the gating and rollback workflow is essential.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexManage Simulink Variant Manager and Variant Configurations workflows — examine, list, and explore variant configurations, variant control variables, and variant model structure; create, modify, and delete variant configurations; validate variant constraints; generate valid variant configurations; apply, activate, or update models with variant configurations; compare variant configurations and analyze which blocks are active or different; open or close the Variant Manager UI; set up non-intrusive variant configuration specific simulation and testing with variant configurations; show/hide variant control variable usage. Use when working with variant configurations, variant manager, VCS objects (VariantConfigurationData / VariantConfigurations), variant control variables, preferred configuration, activation of variant choices, or reducing a variant model to selected variant configurations.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse when writing or editing Simscape Language (.ssc) source files — components, domains, or functions. Triggers include: model a physical component in .ssc; write physical equations for a Simscape block; add or modify physics or parameterization options in a Simscape component; build a composite component. Also use for validating .ssc syntax, fixing Simscape Language errors, or converting governing equations into working Simscape component code. Do NOT use for configuring or connecting existing Simscape blocks in a Simulink model — that is model building, not language authoring.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexManage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material, configure a startup application, and run target lifecycle ops (connect, reboot, RTOS update). Use whenever the user asks "which targets are available", "is my target connected", "what's the status of the target", "add a Speedgoat", "switch default target", "change the target IP", "reboot the box", "update the target", or works with `slrealtime.Targets`, `tg = slrealtime`, `addTarget`, `removeTarget`, `getTargetNames`, `getDefaultTargetName`, `setDefaultTargetName`, `connect`, `isConnected`, `status(tg)`, `setipaddr`, `setupTLSCertificate`, `setStartupApp`, `reboot`, `update`, or `slrealtime.testSetup`. Covers Speedgoat target computers and Simulink Real-Time Linux devices.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexCreate and register Simulink block icons programmatically. Use when asked to create an icon, generate a block icon, design an SVG icon for a Simulink block, register an icon, or help with IconEditor features like visibility conditions, layout constraints, parts, port labels, dynamic text, or block frame shapes (e.g. a round or capsule outline).
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexFind, show, open, or identify shipped MathWorks example models that demonstrate a concept, block, or application domain, and return the command to open them.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexStatically analyze a Simulink model for Rapid Accelerator (raccel) mode incompatibilities. Identifies unsupported blocks (Interpreted MATLAB Function, Level-2 S-Functions without TLC), configuration issues, and data type restrictions that prevent code generation. Classifies each issue as BLOCKER (build error) or WARNING (build warning). Use BEFORE calling sim() in rapid-accelerator mode, when buildRapidAcceleratorTarget fails, or when the user asks "why won't my model run in raccel?" TRIGGER: any request explicitly involving rapid accelerator mode, raccel, raccel build errors, or buildRapidAcceleratorTarget failures.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse this skill when the user asks to check Simulink model compliance against a standard (MISRA, MAB, JMAAB, ISO, DO, IEC, EN, CERT C/CWE, AUTOSAR, Simulink Code Inspector (SLCI)), wants to run Model Advisor checks, or needs a compliance report with fix suggestions. For JMAAB/MAB, supplement deterministic checks with agentic review of uncheckable guidelines.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy, and confirms the copy is compatible; optionally raises confidence the fix preserved behavior via a back-to-back consistency replay (agreement on the generated tests, not a proof of equivalence). Do NOT use for running test generation, design error detection, or requirement verification themselves — only for making a model compatible so those can proceed.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse when asked to run Design Error Detection (quick defect scan), find design errors in a Simulink model, perform root cause analysis on DED findings, fix division-by-zero, overflow, dead logic or out-of-bounds defects detected by SLDV, or diagnose why missing coverage cannot be achieved (dead logic blocking coverage objectives). Do NOT use for requirement verification, test generation, Inf/NaN detection, active logic analysis, or coverage measurement.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexCollect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test runs. Covers metric discovery, collection, report generation, and diagnostics. Triggers on: "collect metrics", "quality metrics", "metric.Engine", "testing metrics", "maintainability metrics", "SIL metrics", "PIL metrics", "what metrics are available", "assess quality", "coverage metrics", "generate metric report", "diagnose metric errors".
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexUse this skill when the user asks to summarize, or asks why Simulink Coverage objectives are missing, unsatisfied, or uncovered on a coverage result they already have — why specific decision, condition, MCDC, relational-boundary, or saturation/overflow outcomes weren't exercised, whether uncovered logic is dead code, or how to close the gap (a test, a coverage filter, or a design change). It reads an existing cvdata, .cvt file, sim-with-coverage output, or Simulink Test result; it never runs cvsim to collect coverage.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexCreate validated architecture, workflow, sequence, data-flow, lifecycle/state, ERD, class, tree, timeline, and waterfall diagrams as explorable standalone HTML with dark/light themes, motion and image/SVG/WebM export. Accept requirements or Mermaid; inspect repository evidence for code-backed diagrams. Use when visualizing systems, API calls, pipelines, schemas, histories, timings, or everyday steps, parts, relationships and states. Also turn an answer into a one-page explainer, with the conclusion first, structured panels, native diagrams and charts, when the user asks for a page, an explainer or an answer to share (做成一页, 用页面讲), or proactively when the user's rules opt in with an [archify explainer: ...] line. Not for dashboards.
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexHTML PPT Studio — author professional static HTML presentations in many styles, layouts, and animations, all driven by templates. Use when the user asks for a presentation, PPT, slides, keynote, deck, slideshow, "幻灯片", "演讲稿", "做一份 PPT", "做一份 slides", a reveal-style HTML deck, a 小红书 图文, or any kind of multi-slide pitch/report/sharing document that should look tasteful and be usable with keyboard navigation. Triggers include keywords like "presentation", "ppt", "slides", "deck", "keynote", "reveal", "slideshow", "幻灯片", "演讲稿", "分享稿", "小红书图文", "talk slides", "pitch deck", "tech sharing", "technical presentation".
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodex飞书幻灯片:创建和编辑幻灯片。创建演示文稿、读取幻灯片内容、管理幻灯片页面(创建、删除、读取、局部替换)。当用户需要创建或编辑幻灯片、读取或修改单个页面时使用。当用户给出 doubao.com 的 /slides/ URL/token 时,也应直接使用本 skill,不要因为域名不是飞书而回退到 WebFetch;路由依据是 URL 路径模式和 token,而不是域名。不负责:云文档内容编辑(走 lark-doc)、云文档里的独立画板对象(走 lark-whiteboard)、上传或下载普通文件(走 lark-drive)。
zrwangems/dsh-zrwang-plugin
Stars: 2Claude CodeCodexWrites or optimizes prompts: asks for the rules it cannot infer, then attacks the draft against its spec. Use when asked for a new or better prompt, system prompt, agent instructions or CLAUDE.md.
HighMarck17/prompt-engineer
Stars: 0Claude CodeCodexGuides Qdrant monitoring and observability setup. Use when someone asks 'how to monitor Qdrant', 'what metrics to track', 'is Qdrant healthy', 'optimizer stuck', 'why is memory growing', 'requests are slow', or needs to set up Prometheus, Grafana, or health checks. Also use when debugging production issues that require metric analysis.
kr7shnasomani/kairos
Stars: 0Claude CodeCodexUse Nerd Fonts (nerdfonts) glyphs for icons in CLI output, TUIs, shell prompts, statuslines, editor and terminal configs, docs, and web pages. Pick a named glyph from the 10,995 on nerdfonts.com/cheat-sheet (nf-md-, nf-fa-, nf-dev-, nf-oct-, nf-cod-, nf-seti-, nf-pl-), verify the codepoint, and install a patched font from nerdfonts.com/font-downloads. Use when adding or fixing terminal or editor icons, tofu or empty boxes instead of icons, starship, powerlevel10k, oh-my-posh, tmux, lualine, nvim-tree, or a Nerd Font install, even if the user does not say nerd fonts. Do not use for Lucide, Heroicons, Tabler, Iconify SVGs, or Google Fonts pairings. Also: Nerd Font Mono vs Propo, brew, scoop, choco, font-patcher. Triggers: icon, glyph, nerd font, nerdfonts, powerline, starship, powerlevel10k, oh-my-posh, tmux status, lualine, nvim-tree, devicons, tofu, boxes instead of icons, terminal font, editor font, codepoint, font-patcher, emoji, icon font, file icons, statusline icons.
massimodeluisa/nerdfonts-skill
Stars: 2Claude CodeCodexBuild and run workflow for WinUI 3 apps with WinApp CLI 0.6+ — project creation with winapp new, project-mode winapp run, BuildAndRun.ps1 analyzer integration, crash diagnosis, and prerequisites. Use when creating, building, running, or fixing build errors in a WinUI 3 project.
BumpyClock/agent-templates
Stars: 2Claude CodeCodexDispatch to the right problem-solving technique based on how you're stuck
DangQuangSE/team-development-skills
Stars: 19Claude CodeCodexImplement a feature phase by phase from a phased JSON master or Markdown plan. Before each phase, confirm whether to create/run unit tests and whether to run ck:quality, unless explicit flags supply those choices. Supports token-budgeted execution, resumable state, and TDD handoff to ck:test.
DangQuangSE/team-development-skills
Stars: 19Claude CodeCodexCreate a machine-readable phased JSON plan bundle from a spec or feature description. Produces a compact master manifest plus per-phase step files for resumable ck:cook execution.
DangQuangSE/team-development-skills
Stars: 19Claude CodeCodexIndependent senior-engineering quality auditor — architecture, ownership, domain integrity, abstraction, and maintainability. Use as `--gate` inside the ck:cook pipeline (blocks a phase on BLOCKER/HIGH/current-change MEDIUM findings) or call directly with `--audit`, `--diff`, `--changed` on any repository, directory, or file. Never writes tests and never edits production code — it returns structured findings only; ck:cook or ck:fix apply the fix.
DangQuangSE/team-development-skills
Stars: 19Claude CodeCodexStandalone testing skill — owns writing and running tests, verifying behavior, and two-pass TDD orchestration. Default mode analyzes changed scope and runs the relevant tests; `--unit`/`--integration`/`--e2e`/`--all` scope by test type; `--verify` reruns exactly the prior failures; `--all-phases <plan>` sweeps every completed phase for regression. `--tdd --prepare`/`--tdd --verify` bracket `ck:cook` for red-green TDD. Never edits production code, and blocks until a phase's `ck:quality` gate is APPROVED (except `--tdd --prepare`, which runs before any implementation exists).
DangQuangSE/team-development-skills
Stars: 19Claude CodeCodex