Explore skills
Search every indexed skill by name, description, repository or instructions, then narrow the results.
Showing 47461–47490 of 56037 skills
| Skill | Stars | Updated | Works with | Status | Install |
|---|---|---|---|---|---|
| design-wall-assemblyDavidCho1999/archaiflow-skillsBuilds an exterior wall assembly from what the wall has to do rather than from a remembered stack: takes the cladding, the structure, the climate, the fire and acoustic demands and the drying direction you state, then places the four control layers (water, air, vapor, thermal) in an order, gives every layer a stated job, and works each interface where two layers meet and each transition where the wall stops. Trigger on "design a wall assembly", "wall build-up", "what goes in this wall", "layer the exterior wall", "where does the air barrier go", "rainscreen build-up", "design-wall-assembly", or a cladding and a structure named with a request for what sits between them. Supplies the ordering logic and the questions each interface has to answer; supplies no R-value, no permeance, no code minimum and no proprietary product. The arithmetic on the finished stack belongs to condensation-check and the continuity audit to air-barrier-trace, both of which this hands off to. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| design-window-perimeterDavidCho1999/archaiflow-skillsDetails the three sides of an opening as a sequence rather than as three sections: takes the wall assembly, the window type and how it is anchored, then works the head, the jamb and the sill in the order the trades actually build them, laps each control layer over the one below it, and names where water that gets past the window is collected and put back out. Trigger on "window head jamb sill", "window perimeter detail", "sill pan", "flashing sequence at an opening", "how does the air barrier close at a window", "punched opening detail", "design-window-perimeter", or a window and a wall build-up named with a request for how they meet. Supplies the sequencing and lap logic and the questions each side has to answer; supplies no dimension, no shim space, no sealant joint size, no code requirement and no proprietary product. Requires the wall assembly as input and does not design it. It does no structural work and does not replace the enclosure consultant or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| dispute-advisorDavidCho1999/archaiflow-skillsLocates a live construction dispute on the escalation ladder of the contract in force, names the next required step, the notice deadline that governs it, and the point at which counsel should be engaged. Trigger on "dispute advice", "claim escalation", "is this a claim", "notice of claim", "time extension request", "mediation or arbitration", "termination notice", or a pasted change order rejection, delay narrative, or RFI thread that has turned contested. Works with any standard form or bespoke contract. The user supplies the contract and its clauses; the skill reads what it is given and never recalls a notice period, a ladder step, or a procedure from memory. Procedural only: it produces an escalation memo and a notice letter draft, and it is not legal advice. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| doc-readerDavidCho1999/archaiflow-skillsReads a non-drawing project PDF and answers questions about it: a specification, a code excerpt, a contract, a consultant report, or correspondence from an authority. Summarises, locates a clause, extracts values, or lists comments, and cites section and page for every claim it makes. Trigger on "read this spec", "what does this document say", "summarize this report", "find clause X", "what is the authority asking for", or a pasted path to a non-drawing project PDF. For drawing sheets use drawing-reader instead. Detects the document type, asks what is wanted before reading at length, and never answers from what a document of that kind usually says. Writes a per-read summary that points back at the source. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| document-diffDavidCho1999/archaiflow-skillsCompares two versions of a written document — an agreement, a specification section, a programme, a code analysis, an owner's requirements — and reports every change, not the ones the covering note listed. Separates a wording change from a change in obligation, flags every deletion because deletions are what a redline is worst at showing, and reports what moved rather than changed, since relocated text reads as unchanged in most comparisons. Trigger on "what changed between these two versions", "compare these contracts", "diff this spec section", "they sent a revised agreement", "document-diff", or two versions of anything written handed over together. Carries no view on what any clause should say; `contract-review` and `spec-review` read one version on its merits. It is not legal advice and does not replace the attorney or the Architect of Record. For drawings use `drawing-diff`. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-checklistDavidCho1999/archaiflow-skillsThis skill should be used when the user needs a phase-specific drawing-set checklist for an architectural project — SD, DD, CD, or IFC. Trigger on 'make a checklist', 'drawing set review', 'CD checklist', 'DD set review', or pasted phase + project-type context. Generates a structured checklist markdown in `docs/checklists/` and updates the project checklist index. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-diffDavidCho1999/archaiflow-skillsCompares two revisions of the same sheet or drawing set and reports what actually changed. Trigger on "what changed between these revisions", "compare Rev C and Rev D", "diff these drawings", "did they change anything", "check this against the last issue", or two pasted PDF paths of the same sheet or set. Matches pages by the sheet number printed in the title block rather than by page order, diffs extracted text to catch dimension, note, and tag edits, overlays the rendered pages to find linework that moved, then reads the changed regions to describe them. Flags changes carrying no revision cloud, and clouds carrying no change. Writes one report per comparison to `docs/drawing-diffs/`. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-logDavidCho1999/archaiflow-skillsMaintains a drawing issue log in docs/drawings/log.md: every sheet in the set, its current revision, and every dated issuance with its purpose. Trigger on "drawing log", "issue log", "sheet log", "revision log", "what rev is", "when did we issue", "drawing register", "drawing-log", or a request to record that a set went out. The sheet list can be seeded from a drawing-set-bookmarker index or typed; revisions and issue dates come from you, never from a guess. Superseded sheets are marked, not deleted, so the log answers what was in force on any past date. It records what was issued to whom; the cover sheet for a package is create-transmittal's job, and what changed inside a sheet is drawing-diff's. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-readerDavidCho1999/archaiflow-skillsReads an architectural drawing PDF and answers questions about it: a single sheet, a full set, a redline, a record drawing, a shop drawing, or a detail. Summarises, finds a sheet, explains a detail, lists disciplines, or pulls a callout. Trigger on "read this drawing", "what is in this set", "summarize this drawing", "show me sheet X", "what is on this sheet", or a pasted path to a drawing PDF. For specifications, codes, contracts, and reports use doc-reader instead. Detects the drawing type, asks what is wanted before reading at length, and hands off to schedule-extractor, drawing-set-bookmarker, or drawing-checklist when one of those fits better. Never reports a dimension or a note it did not read off the sheet. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-set-bookmarkerDavidCho1999/archaiflow-skillsThis skill should be used when the user has a multi-sheet architectural drawing-set PDF (typically 50–300 sheets) with no bookmarks or a flat/incorrect bookmark tree, and wants a properly bookmarked PDF plus a CSV sheet index. Trigger on "bookmark this drawing set", "add bookmarks to this PDF", "tabulate sheets", "make a sheet index", or a pasted path to a multi-sheet drawing PDF. Reads each page's title block via vision, extracts sheet number/name/discipline, groups by discipline per US National CAD Standard, and writes the bookmarked PDF + index to `docs/drawing-sets/`. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| drawing-standards-auditDavidCho1999/archaiflow-skillsSweeps a whole drawing set for the conventions that decide whether it can be read: whether the sheet index matches the sheets, whether every reference lands on something that exists, whether the title block is complete and consistent, whether symbols and abbreviations are used as the legend defines them, and whether the same information appears twice with two answers. Reports by frequency so the systematic problems separate from the isolated ones. Trigger on "drawing standards audit", "check the set for consistency", "do the references resolve", "title block check", "is this set ready to issue", "drawing-standards-audit", or a set handed over before issue. Carries no office standard, no layer convention and no line weight table; the standard comes from your office or the project's own set. It reviews conventions rather than content — `drawing-checklist` covers what a phase should contain and `spec-review` covers the book. It does not replace the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| elevation-reviewDavidCho1999/archaiflow-skillsReads any elevation for the two things it is doing at once: composing a facade, and hiding the depth that makes it buildable. An elevation is a flat drawing of something that is not flat, so joints, reveals, returns, thicknesses and everything behind the surface are all drawn as lines of equal weight or not at all. Checks what it commits to, what it leaves to a section, and where it disagrees with the plan. Trigger on "read this elevation", "does this facade work", "they sent elevations", "check this elevation against the plan", "elevation-review", or any elevation handed over. Carries no dimensions or module sizes; anything measured is read at the stated scale. `facade-module` divides an elevation into panels and `design-envelope` decides what each face has to be; this reads the drawing. It does not replace the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| embodied-carbon-trackerDavidCho1999/archaiflow-skillsKeeps one dated record of a project's embodied carbon as the design changes: quantities from your own take-off, factors from the data source you name, and the result kept per element and per life-cycle stage rather than as one number, because a single figure hides which decision moved it. Records the boundary and the data vintage on every entry, since two projects' figures are comparable only when both are stated. Trigger on "embodied carbon", "track the carbon on this design", "whole life carbon", "EPD", "upfront carbon", "A1-A3", "embodied-carbon-tracker", or a material change with a question about its carbon. Carries no emission factors and no benchmarks; every factor comes from an EPD or a database you name, with its vintage. `decarbonization-strategist` plans the operational path over years; this counts what the materials carry. It is not an LCA and does not replace the sustainability consultant. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| entitlement-trackerDavidCho1999/archaiflow-skillsKeeps one dated record of a discretionary land use approval, which behaves nothing like a permit: the decision-maker is a body that meets on a calendar, the outcome is negotiated rather than checked, and the conditions attached at the end become obligations the project carries for its life. Logs every submission, every hearing, every commitment made in a room, and every condition with what discharges it and who owns it. Trigger on "entitlement tracker", "track the rezoning", "planning approval log", "what did we commit to at the hearing", "conditions of approval", "entitlement-tracker", or a discretionary application handed over to keep track of. Carries no process, no timelines and no hearing calendars; all come from the jurisdiction. It does not track building permits — `permit-tracker` does — and does not replace the land use attorney, the planner, or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| envelope-checklistDavidCho1999/archaiflow-skillsBuilds the envelope checklist for one project rather than handing over a generic one: takes the assemblies this building actually has and the phase it is at, and produces what should be resolved by now, what can still wait, and what is already late. Works from the junction list rather than from the assemblies, because assemblies get drawn and junctions get discovered. Trigger on "envelope checklist", "what should be resolved by DD", "are we ready to issue the envelope", "what have we missed on the facade", "envelope-checklist", or an envelope scope at a phase change. Carries no standard checklist and no performance values; the items come from the assemblies and junctions this project has. `drawing-checklist` covers the drawing set by phase; this covers the envelope by what it is made of. It does not replace the enclosure consultant or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| envelope-diffDavidCho1999/archaiflow-skillsCompares two versions of an envelope assembly or detail and reports what the change does rather than what it looks like: which control layer moved, what continuity was gained or lost, which junction details are now wrong, and whether the drying direction changed. Built for the moment a contractor proposes an alternate, a manufacturer's detail replaces yours, or a value-engineering round comes back, because those changes arrive one layer at a time and their consequences arrive at the junctions. Trigger on "what changed in this assembly", "they proposed a different build-up", "compare these two sections", "is this substitution equivalent", "envelope-diff", or two versions of an envelope construction handed over together. Carries no values; every figure comes with the versions. `document-diff` compares written documents and `drawing-diff` drawing revisions; this compares what an assembly does. It does not replace the enclosure consultant or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| equipment-readerDavidCho1999/archaiflow-skillsReads any product or equipment data sheet and pulls out the six things a building has to provide for it: the space it occupies, the clearance it needs on each side to be serviced, the route to get it in and out, the services it needs and from where, what it weighs and what carries it, and what it does to the room around it in heat, noise and vibration. Works for a rooftop unit, a lift, a range, a transformer, a door closer or a light fitting. Trigger on "read this cut sheet", "what does this unit need", "they sent product data", "will this fit", "equipment-reader", or a data sheet handed over with a question about space. Carries no dimensions or clearances of its own: every figure comes off the sheet, and a figure absent from the sheet is reported missing rather than assumed from a similar product. It does not select or size equipment and does not replace the engineers or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| existing-conditions-surveyDavidCho1999/archaiflow-skillsPlans and records a measured survey of an existing building so that every dimension later designed against carries its provenance: what to capture before going, how to close a measurement so errors are caught on site rather than in the office, and the discipline of marking every line as measured, taken from a record drawing, or assumed. Produces the record and the list of what still has to be opened up or verified. Trigger on "measure the existing building", "as-built survey", "existing conditions", "we only have the old drawings", "what do I measure on the site visit", "existing-conditions-survey", or a renovation starting with no reliable information. Carries no tolerances and no survey standards; the level of accuracy needed comes from what the drawings will be used for. It is not a land survey — `survey-review` reads one — and not a structural, hazardous materials, or condition assessment, each of which is a specialist's and is named as a hand-off. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| facade-access-studyDavidCho1999/archaiflow-skillsWorks out how every part of a building's envelope will be reached after it is built: cleaned, inspected, repaired, and, for glass, replaced. Inventories the envelope by zone, holds candidate access methods against each one — reach from grade, rope descent, davits, a building maintenance unit, interior access — and reports what each method demands of the design now: roof space, structure, anchors, parapets, and ground kept clear. Trigger on "facade access", "how do we clean this", "window washing", "BMU", "davits", "rope access", "facade-access-study", "how does the glass get replaced", or a tall or complex envelope with no maintenance story. The zoning of the envelope and the demands table are the skill's method; every load, every regulation, and every equipment figure comes from elsewhere: anchor and davit loads are the structural engineer's, the rules for suspended access are regulatory text the user quotes, and reach figures come from the equipment's own data. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| facade-moduleDavidCho1999/archaiflow-skillsDivides elevation lengths and heights by a panel module and works the remainder into explicit options: resize every panel equally, absorb the leftover in end or corner panels, or take it in one feature bay, with the arithmetic for each and a check of where mullions land against the structural grid. Trigger on "panelize", "curtain wall module", "facade module", "mullion spacing", "panel layout", "facade-module", or an elevation length paired with a module. Every dimension comes from the user: elevation lengths and floor heights from their drawings, the module and any panel size limits from the manufacturer's literature, the grid from their structural plans. The skill never supplies a manufacturer's maximum panel size or a standard module from memory, does not size mullions or check wind load, does not judge thermal or glare performance, and does not choose between the options it lays out. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| fee-estimatorDavidCho1999/archaiflow-skillsEstimates a design fee four ways in parallel, as a percentage of construction cost, by area, as hourly against a cap, and as a lump sum, then splits the result by phase and by consultant and adds a reimbursables budget. Trigger on "fee estimate", "what should I charge", "design fee", "percent of construction cost", "lump sum or hourly", "consultant fee split", or a pasted program with a fee question. Works in any market. Every rate, percentage, phase split, consultant share, and any procurement cap comes from the user's own past projects, their contract, or the rule they name; the skill supplies the four methods and the comparison and never a benchmark figure from memory, since the published fee surveys are paywalled and cannot be quoted. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| fee-trackerDavidCho1999/archaiflow-skillsTracks a project's design fee in docs/practice/fees.md: the contract fee by phase, percent complete as you state it, earned fee computed from the two, invoices as issued and as paid, and the aging of what is outstanding, with the arithmetic shown. Trigger on "fee tracker", "how much have we billed", "earned vs billed", "unbilled", "outstanding invoices", "receivables", "invoice log", "fee-tracker", or an invoice to record. Percent complete is your judgment and the skill never estimates it; fees, invoice amounts, and dates come from you, in your currency, and nothing is recalled or benchmarked. Estimating a fee before there is a contract is fee-estimator's job; this starts when the contract is signed. It is a project record, not accounting: no tax, no ledger, no payroll costs. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| file-organizerDavidCho1999/archaiflow-skillsSorts a disorganized folder into a target tree, by writing a move plan you read and approve before any file is touched. Trigger on "organize this folder", "sort these files", "clean up this directory", "tidy this handoff folder", "file organizer", or a pasted path plus an organizing verb. Matches on filename, extension, size, and modified date, never on file contents. Finds duplicates by hash and routes them for review rather than deleting anything. Every run writes a plan first, executes only against the approved plan, and appends an audit log that a rollback can read backwards. The taxonomy is yours: the skill will draft one from what it finds, but it does not invent target folders you did not agree to. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| fit-out-studyDavidCho1999/archaiflow-skillsTests whether a tenancy works in a shell that is already there, which is a different problem from fitting a building on a site: the grid, the core, the servicing and the base building's own rules are fixed, and the programme has to bend around them. Establishes what is actually immovable before laying anything out, works the programme against the fixed points, and separates what the landlord provides from what the tenant does, since that boundary decides the budget and it is in a document nobody has read. Trigger on "fit out", "will this programme fit in this space", "tenant improvement", "test fit for a lease", "is this floor plate any good for us", "fit-out-study", or a floor plan of an existing building with a programme to place in it. Carries no areas, no ratios and no code requirements; areas come from the user and the lease's measurement basis from `area-measurement`. `test-fit` works a site under zoning limits; this works a shell under a lease. It does not replace the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| geotech-report-reviewDavidCho1999/archaiflow-skillsReads a geotechnical report from the architect's side: separates what was actually investigated from what was inferred between boreholes, pulls out every recommendation that becomes a design obligation, finds the conditions the report makes contingent on something happening later, and reports what it means for the building rather than for the foundation engineer. Trigger on "review the geotech report", "what does this soils report mean for us", "read the geotechnical recommendations", "borehole log review", "geotech-report-review", or a soils report handed over at the start of design. Carries no bearing values, no soil classifications and no design parameters; every figure comes from the report, quoted. It is not geotechnical engineering, does not verify a recommendation, and does not replace the geotechnical engineer, the structural engineer, or the Architect of Record. For one recommendation in plain English use `/explain-soils`. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| go-no-go-reviewDavidCho1999/archaiflow-skillsScores a pursuit before the proposal is written, against the factors that actually predict whether a project is won and whether it is worth winning: the relationship, the client's decision process and funding, the competition, the fit with what the practice does, the fee and terms, and the capacity to deliver it. Records the decision and the reasoning so it can be read back against the outcome. Trigger on "go no go", "should we chase this", "pursuit review", "is this RFP worth answering", "go-no-go-review", or an opportunity raised for a decision. Carries no scoring weights and no thresholds; the practice sets what matters to it and what score means yes. It does not write the response — `rfp-response-builder` does — and does not decide. It records a decision somebody made, with the reasoning, so the next one is better informed. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| insurance-advisorDavidCho1999/archaiflow-skillsAssembles a project insurance program recommendation: which policy types the project needs, what each one covers, the wrap-up against traditional structure decision, and a checklist to take to a broker. Trigger on "insurance program", "what limits should we carry", "wrap-up insurance", "builder's risk", "professional liability limits", "insurance review", or a pasted project profile with a coverage question. Works in any market. Limits, required coverages, and certificate formats come from the user's contract and their broker; the skill supplies the structure of the decision and never a limit figure or a required coverage from memory. Produces a recommendation memo and a broker request checklist, and is not broker advice, a quote, or a binder. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| jurisdiction-profileDavidCho1999/archaiflow-skillsBuilds and maintains one file per project that records the limits a code sets, each with the clause it came from, so the checking skills stop asking for the same number on every run. Trigger on "jurisdiction profile", "set up the code profile", "record the code limits", "reuse my code values", "where do the limits come from", or a request to fill in or extend an existing profile. Works in any jurisdiction. The profile ships empty: every value is typed, pasted from the clause, or read out of a file the user names, and a row without a clause is marked as such rather than being treated as verified. Does not look a code value up, does not carry a default, and does not decide which code governs. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| leak-triageDavidCho1999/archaiflow-skillsWorks out what kind of water is appearing before anyone opens a wall: rain driven in, groundwater, a plumbing failure, condensation, or air-carried moisture, which look identical inside and have entirely different causes, owners and repairs. Reads the evidence that separates them — when it appears, what the weather was doing, whether it is warm or cold, whether it is clean, whether it stops — then narrows the source and names what would confirm it. Trigger on "there is a leak", "water is coming in", "a stain appeared on the ceiling", "is this condensation or a leak", "where is this water coming from", "leak-triage", or water appearing anywhere with no agreed cause. Carries no dew points, no rainfall figures and no test standards; every value comes from the building's own data or the tester. It diagnoses rather than repairs, does not apportion liability, and does not replace the enclosure consultant, the plumber, or the Architect of Record. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |
| leed-trackerDavidCho1999/archaiflow-skillsThis skill should be used when the user wants to build, update, or score a LEED v4.1 BD+C New Construction scorecard for an architectural project — by walking the credit list, declaring pursuit status (Yes / Maybe / No / N/A) for each credit, and summing points to predict certification level (Certified / Silver / Gold / Platinum). Trigger on "LEED scorecard", "LEED v4.1 score", "score this project for LEED", "LEED tracker", or pasted project program with sustainability goals. Reads bundled credit-by-credit point matrix from USGBC LEED v4.1 BD+C and outputs a CSV scorecard plus a markdown summary in `docs/leed/`. Does NOT make LEED eligibility judgments — the user declares what they intend to pursue; this skill organizes and scores. | Stars: 1 | Updated | Claude CodeCodex | Unverified | Install |